|
|
|
05-06-2003, 06:41 PM
|
#1 |
|
Broke and still trying
Join Date: Apr 2003
Location: Alameda, CA
Posts: 562
|
drop spindles
 I've put some drop spindles on that I bought from McGaughy's and the drop was great but the toe on the passenger side was in about 3 complete turns on the tie rod sleeve. Is this normal? I did a simple measurement alignment to get it out of my mother's driveway (where all the work is done) to get to my house. Going to take it in for alignment soon. I just don't understand that many say drop spindles don't need alignments. Any opinions? 68 c10 lwb with 15x8/15x10 6lug rallys and a 3.5 front 4 back drop. |
|
|
|
05-16-2003, 11:46 PM
|
#2 |
|
Project92 SWB stepside
Join Date: Feb 2003
Location: Louisville KY
Posts: 4,792
|
Every time I have used droped spindles I had to realign!!
__________________
92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448 |
|
|
|
|
05-17-2003, 12:10 AM
|
#3 |
|
Registered User
Join Date: Feb 2000
Location: Zillah Wa. USA
Posts: 394
|
I'll find out soon as I installed a set of Early Classic spindles today on my 69 SWB.
__________________
'69 SWB '76 International "Terra" "Hooked on holiday beer" |
|
|
|
 |
| Bookmarks |
|
|
Hybrid Mode
