Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
|
04-03-2012, 10:25 PM | #1 |
Registered User
Join Date: Oct 2010
Location: blue mtn. ms
Posts: 100
|
rear main seal, 454, 85 4x4 ???
will the oil pan come off a big block in a 4x4 ?? will the motor jack up high enough to clear cross member ? my rear main seal is pouring, will it be just as easy to pull motor out ? cause i know the fan shroud is coming lose and distributor will probably have to come out.
|
05-01-2012, 03:36 PM | #2 |
Registered User
Join Date: Apr 2011
Location: Centerburg, Ohio
Posts: 172
|
Re: rear main seal, 454, 85 4x4 ???
I just dropped my pan. You have pick the truck up by the frame so that the front axles drops to it's lowest point... but then again, I have 6 inches of lift so your situation may require you to pull the motor as my situation was a tight squeeze to get the pan off. Good luck, don't mean to discourage you... but I got my rear and front main done and they both still leak. And I bought the good gaskets and used rtv where suggested. I was so mad it wasn't even funny.
__________________
1986 Chevy Silverado k30: factory air, tilt wheel, 454cu 7.4L, Turbo 400, NP205, Corporate 14 bolt, Dana 60 front, 4.10 gears, SRW, long bed, standard cab... MY TRUE LOVE |
Bookmarks |
|
|