help with back window - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ivorton74 · 04-20-2012, 08:03 PM

i scored a back window for $30 yesterday. its one of the sliding windows but anyway..how hard is it to put in on and how hard is it to take the old one off?

**old Rusty C10** · 04-20-2012, 08:29 PM

i have a bunch of dull screwdrivers so i use them to start in a lower corner and pry up and pus out the gasket one inch or so at a time. its real easy just make sure you pull out the center piece of round moulding in the gasket it its equipped with it..

04-20-2012, 08:03 PM	#1
ivorton74 Registered User Join Date: Nov 2011 Location: South Dakota Posts: 916	help with back window i scored a back window for $30 yesterday. its one of the sliding windows but anyway..how hard is it to put in on and how hard is it to take the old one off?

04-20-2012, 08:29 PM	#2
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,310	Re: help with back window i have a bunch of dull screwdrivers so i use them to start in a lower corner and pry up and pus out the gasket one inch or so at a time. its real easy just make sure you pull out the center piece of round moulding in the gasket it its equipped with it.. __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.