Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
|
05-04-2012, 08:27 PM | #1 |
Registered User
Join Date: Apr 2012
Location: Altoona, Iowa
Posts: 18
|
What year 4L60E trans will work with 2010 5.3 motor
I just bought a complete 2010 5.3 motor minus transmission for my 68. Do I need to stick with finding the same year 2wd 4L60E trans or do other years interchange. Didn't want to buy an older trans and it not work with my computer or whatever might be different. Thanks!
|
05-04-2012, 10:02 PM | #2 | |
Senior Member
Join Date: May 2009
Location: Fort Worth, TX
Posts: 6,370
|
Re: What year 4L60E trans will work with 2010 5.3 motor
Quote:
Any 98 & up LS 4L60E will bolt up. Did you get the ECM, TCM, harness, pedal etc. etc.? If it originally had a 4L60E...And you have the TCM, Your set to use any LS 4L60E/4L65E you want. The T42 TCM that runs the 4L60E on GenIV engines looks like this..... |
|
05-04-2012, 10:45 PM | #3 |
Registered User
Join Date: Aug 2011
Location: Dallas TX
Posts: 563
|
Re: What year 4L60E trans will work with 2010 5.3 motor
2010 would have had a 6-speed
Do yourself a favor and put regular lifters in it and get rid of the VLOM. |
05-04-2012, 11:50 PM | #4 |
Registered User
Join Date: Apr 2012
Location: Altoona, Iowa
Posts: 18
|
Re: What year 4L60E trans will work with 2010 5.3 motor
It came with the harness and pedal,etc. Just no trans. I found a couple 2010 2wd transmissions for a 5.3 with low miles for $900, I guess I will go that route. I probably should have done more research before I bought this motor!
|
05-05-2012, 03:02 PM | #5 | |
Registered User
Join Date: Dec 2009
Location: Independence Mo
Posts: 4,119
|
Re: What year 4L60E trans will work with 2010 5.3 motor
Quote:
Posted via Mobile Device
__________________
My '72 short bed build. http://www.ls1tech.com/forums/conver...6-0-4l80e.html 5.3 swap into my RUSTY '71 C10 http://ls1tech.com/forums/conversion...71-c-10-a.html |
|
05-06-2012, 12:15 AM | #6 |
Registered User
Join Date: Apr 2012
Location: Altoona, Iowa
Posts: 18
|
Re: What year 4L60E trans will work with 2010 5.3 motor
The 2010 trans looks really big and I don't want to get into cutting up the tunnel. This is why I would like to run a 4L60E trans from like a 2006 or something. My question is can this be done and do I need to change the harness to the same year trans.
|
Bookmarks |
|
|