Need Front Driveshaft - The 1947 - Present Chevrolet & GMC Truck Message Board Network

76vandura · 05-16-2003, 01:42 AM

I am looking for a front driveshaft for my 78 3/4 ton Chevy. It is the first design shaft for a 4 speed with NP 205 transfer case. Anyone got one for sale in good shape?

Thanks!

maddog_74k5 · 05-17-2003, 12:33 AM

ive got one out off a 74 k5 1/2 ton that had a 4spd/205 in it listed on here im asking $75 obo let me no if ur interested

**crossy** · 05-17-2003, 01:25 AM

If his won't work give me a measurement from inside of 'cup' to 'cup' . I have a few laying here. not sure on apps though. I got them in a buyout. DAVE

76vandura · 05-18-2003, 12:12 AM

I will measure tomorrow. Thanks for the quick replies! I miss my 4 wheel drive!

76vandura · 05-21-2003, 12:29 PM

I have a few pics of my driveshaft. Exactly where do I measure? End to end it is 25 1/2 inches long. I can't post the pics though.

**crossy** · 05-21-2003, 12:45 PM

is that collapsed or extended? I measure center of 'cup' (for U-joint) to center of U-joint cap. but it doesn't matter how/where as long as you tell us . thats why it's nice to have pic with a tape measure next to it so we can see.
If you are saying that you cannot post the pics HERE. or not at all on PC. if you can send to my Email . I will look through mine and post it here. DAVE .

all4trux@snip.net

05-16-2003, 01:42 AM	#1
76vandura Registered User Join Date: Sep 2002 Location: Cambridge, OH Posts: 64	Need Front Driveshaft I am looking for a front driveshaft for my 78 3/4 ton Chevy. It is the first design shaft for a 4 speed with NP 205 transfer case. Anyone got one for sale in good shape? Thanks! __________________ 76 Gmc Vandura Custom, RIP 82 K30 4x4 6" Lift, Built 350, many mods 84 cutlass 350 chevy out of my vandura

05-17-2003, 01:25 AM	#3
crossy Oh,you can't buy that new Join Date: Apr 2000 Location: Pennsville,N.J. 08070, USA Posts: 2,039	If his won't work give me a measurement from inside of 'cup' to 'cup' . I have a few laying here. not sure on apps though. I got them in a buyout. DAVE __________________ "been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone 73 Pinto, stock, w/CragarSS's-eww LOTS of Cummins trucks.

05-18-2003, 12:12 AM	#4
76vandura Registered User Join Date: Sep 2002 Location: Cambridge, OH Posts: 64	I will measure tomorrow. Thanks for the quick replies! I miss my 4 wheel drive! __________________ 76 Gmc Vandura Custom, RIP 82 K30 4x4 6" Lift, Built 350, many mods 84 cutlass 350 chevy out of my vandura

05-21-2003, 12:29 PM	#5
76vandura Registered User Join Date: Sep 2002 Location: Cambridge, OH Posts: 64	I have a few pics of my driveshaft. Exactly where do I measure? End to end it is 25 1/2 inches long. I can't post the pics though. __________________ 76 Gmc Vandura Custom, RIP 82 K30 4x4 6" Lift, Built 350, many mods 84 cutlass 350 chevy out of my vandura

05-21-2003, 12:45 PM	#6
crossy Oh,you can't buy that new Join Date: Apr 2000 Location: Pennsville,N.J. 08070, USA Posts: 2,039	is that collapsed or extended? I measure center of 'cup' (for U-joint) to center of U-joint cap. but it doesn't matter how/where as long as you tell us . thats why it's nice to have pic with a tape measure next to it so we can see. If you are saying that you cannot post the pics HERE. or not at all on PC. if you can send to my Email . I will look through mine and post it here. DAVE . all4trux@snip.net __________________ "been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone 73 Pinto, stock, w/CragarSS's-eww LOTS of Cummins trucks.

05-17-2003, 12:33 AM	#2
maddog_74k5 Registered User Join Date: May 2003 Location: california Posts: 12	ive got one out off a 74 k5 1/2 ton that had a 4spd/205 in it listed on here im asking $75 obo let me no if ur interested



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.