The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1947 - 1959 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 07-05-2012, 01:59 PM   #1
gboom52
Registered User
 
Join Date: Jul 2012
Location: charlotte,nc
Posts: 4
Question 52 5 window

i have a 97 s 10 ext cab pickup i was doing the frame swap to my 52 .and i was wondering because of the ext cab would i have to cut frame down some and if so how much and where. thanks
gboom52 is offline   Reply With Quote
Old 07-05-2012, 06:43 PM   #2
mr48chev
Registered User
 
mr48chev's Avatar
 
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,711
Re: 52 5 window

Yes. What's wrong with the stock frame?
mr48chev is offline   Reply With Quote
Old 07-06-2012, 06:30 AM   #3
coralhead
Registered User
 
coralhead's Avatar
 
Join Date: Jun 2011
Location: Floyds Knobs, IN
Posts: 430
Re: 52 5 window

Quote:
Originally Posted by mr48chev View Post
Yes. What's wrong with the stock frame?
I know where this is going and I agree........
coralhead is offline   Reply With Quote
Old 07-06-2012, 07:05 AM   #4
gboom52
Registered User
 
Join Date: Jul 2012
Location: charlotte,nc
Posts: 4
Re: 52 5 window

Nothings wrong.I just wanted to swap because it's cheaper than the mustang 2 swap.how much do I have to cut and where.
Posted via Mobile Device
gboom52 is offline   Reply With Quote
Old 07-06-2012, 11:30 AM   #5
robin58
Registered User
 
Join Date: May 2007
Location: Louisiana
Posts: 763
Re: 52 5 window

I always thought it was the older body style 83-88 S10 single cab long box that was the desired one to swap? And preferably a 4x4.

But... your best bet is to go grab the dimensions of the existing chassis from the Shop Manual and then lay everything out on your new frame.

Or there's a wealth of info here: http://www.jalopyjournal.com/forum/s...light=s10+swap
robin58 is offline   Reply With Quote
Old 07-06-2012, 11:35 AM   #6
D-man313
Registered User
 
D-man313's Avatar
 
Join Date: Oct 2011
Location: Hebron, IN
Posts: 194
Re: 52 5 window

Preferably use a regular cab long bed s10. Ive seen people use the extended cab frame, but not sure how much was cut.

I used a 98 regular cab long bed frame. Feel free to PM with any questions
__________________
Mom, I think I may have broke something. My tires keep spinning and leaving black marks every where
D-man313 is offline   Reply With Quote
Old 07-06-2012, 12:06 PM   #7
geoffcalii
Registered User
 
Join Date: May 2011
Location: hamilton ohio
Posts: 12
Re: 52 5 window

i just cut down an ext cab frame, took out 5inches reight behind the factory joint up front.
geoffcalii is offline   Reply With Quote
Old 07-06-2012, 12:35 PM   #8
S10Fan
Old Heap Driver
 
Join Date: Mar 2008
Location: Newport News, Va
Posts: 2,642
Re: 52 5 window

Long bed standard cab frame is the best and most used chassis. I used a short wheel base frame for my 50, had to add a few inches in the middle to make it work.

My stock frame was hacked to death and not safe for anything but the scrap yard. If, my stock frame had been in better shape I would have used it along with some sort of aftermarket front end. Much easier to work with a stock frame than trying to fit everything to an S-10 frame.
__________________
_____________________________
Bryan

'99 Silverado 1500, 4.3, 5-speed, reg cab, short bed
'50 Chevy 2DR Hard Top, 350/350, M2 Front End, 3:08 gear, cruiser.
'40 F**d Sedan, all Chevy power, Heidt's front end, TCI rear, nice driver.
S10Fan is offline   Reply With Quote
Old 07-06-2012, 01:16 PM   #9
n_elsod
Registered User
 
n_elsod's Avatar
 
Join Date: May 2012
Location: Minneapolis
Posts: 49
Re: 52 5 window

I used an 88 extended cab short box 4x4 for mine and didn't have to cut the center. I did have to take some off the front and back though. The wheel base is 1" longer than a 51 and the axles are 1" narrow than a 51.
n_elsod is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:06 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com