NC WTB high hump floor section - The 1947 - Present Chevrolet & GMC Truck Message Board Network

62 bigwindow · 07-24-2012, 10:24 PM

Looking for the high hump center floor section for 64-66

Caudillo64 · 07-24-2012, 10:48 PM

I have this one They turned into automatic but it could be removed and welded up. LMK

62 bigwindow · 07-25-2012, 05:07 AM

I dont mind doing a little work ...doesnt it also have a small piece that also go with it?

Caudillo64 · 07-25-2012, 07:07 AM

Quote:

Originally Posted by 62 bigwindow

I dont mind doing a little work ...doesnt it also have a small piece that also go with it?

What small piece? Where dose it go and whats it for?

LostMy65 · 07-25-2012, 09:48 AM

There's a another small piece that goes above that piece that matches up to the firewall.
Posted via Mobile Device

gostranger · 07-25-2012, 11:48 AM

you will want the small piece that goes in front of it for sure it is welded in so the spot welds will have to be drilled out!

62 bigwindow · 07-25-2012, 02:04 PM

I thought there was a small piece that went on the front of the hump to the firewall... I woam looking for both please if anybody has them let me know...

Caudillo64 · 07-25-2012, 07:02 PM

This how mine set in

Caudillo64 · 07-25-2012, 10:20 PM

Quote:

Originally Posted by Caudillo64

This how mine set in

That is both pieces I would have to cut the top part out. I'm not sure if I'll have time this weekend. I'm delivering a different cab I sold out of town.

LostMy65 · 07-25-2012, 08:00 PM

Here's another pic I found in the forums:

Posted via Mobile Device

62 bigwindow · 07-25-2012, 08:03 PM

Lost my 65....thats what I need..where did you find it and is it for sale?

LostMy65 · 07-25-2012, 08:09 PM

I just did a 'Advanced' Forum Search using the word hump.
I chose to search only the 60-66 parts.
It's an old thread, so it may already be sold.
It was just the best pic I found of what you needed.
http://67-72chevytrucks.com/vboard/s...highlight=hump
Posted via Mobile Device

62 bigwindow · 07-25-2012, 08:12 PM

thanks I will see if I can find it as well... let me know if run across another
Have any idea what trucks these came in originally?

Caudillo64 · 07-29-2012, 01:34 PM

Ok here it is I cut out the top part so you wiil have drill out the spot welds. I'm asking $60.00 + shipping. If your zip code is 27208 shipping will be $27.50 and thats parcel post it weights almost 20 pounds and the box will measure 38x22x12. Also since I cut the top out I'll tape the edges with duct tape because they are sharp. So if zip code is correct total wil be $87.50 LMK

LostMy65 · 07-29-2012, 02:38 PM

If he passes, what would it be to 97015?
Posted via Mobile Device

Caudillo64 · 07-29-2012, 03:34 PM

Quote:

Originally Posted by lostmy65

if he passes, what would it be to 97015?
posted via mobile device

$20.50 shipping

62 bigwindow · 07-29-2012, 05:28 PM

Yep thats what I am looking for.. but my zip code is 27028
just let me know what the shipping and total will be.. I see you had the zip wrong...
thanks so much for addressing this so quickly...

Caudillo64 · 07-29-2012, 05:43 PM

Quote:

Originally Posted by 62 bigwindow

Yep thats what I am looking for.. but my zip code is 27028
just let me know what the shipping and total will be.. I see you had the zip wrong...
thanks so much for addressing this so quickly...

pm sent

Rusty one · 07-30-2012, 11:33 PM

Quote:

Originally Posted by 62 bigwindow

Yep thats what I am looking for.. but my zip code is 27028
just let me know what the shipping and total will be.. I see you had the zip wrong...
thanks so much for addressing this so quickly...

I see you found what you were looking for!
Posted via Mobile Device

Caudillo64 · 07-29-2012, 06:55 PM

sold thank you 62 BigWindow

07-24-2012, 10:24 PM	#1
62 bigwindow Registered User Join Date: Apr 2011 Location: Mocksville NC Posts: 824	WTB high hump floor section Looking for the high hump center floor section for 64-66

07-24-2012, 10:48 PM	#2
Caudillo64 Registered User Join Date: Jul 2011 Location: Fresno, Ca Posts: 365	Re: WTB high hump floor section I have this one They turned into automatic but it could be removed and welded up. LMK Attached Images

07-25-2012, 05:07 AM	#3
62 bigwindow Registered User Join Date: Apr 2011 Location: Mocksville NC Posts: 824	Re: WTB high hump floor section I dont mind doing a little work ...doesnt it also have a small piece that also go with it?

07-25-2012, 09:48 AM	#5
LostMy65 But Found Her 25yrs Later! Join Date: Oct 2010 Location: Oregon City, Oregon Posts: 10,530	Re: WTB high hump floor section There's a another small piece that goes above that piece that matches up to the firewall. Posted via Mobile Device __________________ I lost my 65 - Found it 25 years later: http://67-72chevytrucks.com/vboard/s...d.php?t=426650 66 C20 Service Truck: http://67-72chevytrucks.com/vboard/s...d.php?t=428035

07-25-2012, 11:48 AM	#6
gostranger 65 suburban vortec 5.3 bagged Join Date: Jun 2005 Location: upstate new york Posts: 1,317	Re: WTB high hump floor section you will want the small piece that goes in front of it for sure it is welded in so the spot welds will have to be drilled out!

07-25-2012, 02:04 PM	#7
62 bigwindow Registered User Join Date: Apr 2011 Location: Mocksville NC Posts: 824	Re: WTB high hump floor section I thought there was a small piece that went on the front of the hump to the firewall... I woam looking for both please if anybody has them let me know...

07-25-2012, 07:02 PM	#8
Caudillo64 Registered User Join Date: Jul 2011 Location: Fresno, Ca Posts: 365	Re: WTB high hump floor section This how mine set in Attached Images

07-25-2012, 08:00 PM	#10
LostMy65 But Found Her 25yrs Later! Join Date: Oct 2010 Location: Oregon City, Oregon Posts: 10,530	Re: WTB high hump floor section Here's another pic I found in the forums: Posted via Mobile Device __________________ I lost my 65 - Found it 25 years later: http://67-72chevytrucks.com/vboard/s...d.php?t=426650 66 C20 Service Truck: http://67-72chevytrucks.com/vboard/s...d.php?t=428035

07-25-2012, 08:03 PM	#11
62 bigwindow Registered User Join Date: Apr 2011 Location: Mocksville NC Posts: 824	Re: WTB high hump floor section Lost my 65....thats what I need..where did you find it and is it for sale?

07-25-2012, 08:09 PM	#12
LostMy65 But Found Her 25yrs Later! Join Date: Oct 2010 Location: Oregon City, Oregon Posts: 10,530	Re: WTB high hump floor section I just did a 'Advanced' Forum Search using the word hump. I chose to search only the 60-66 parts. It's an old thread, so it may already be sold. It was just the best pic I found of what you needed. http://67-72chevytrucks.com/vboard/s...highlight=hump Posted via Mobile Device __________________ I lost my 65 - Found it 25 years later: http://67-72chevytrucks.com/vboard/s...d.php?t=426650 66 C20 Service Truck: http://67-72chevytrucks.com/vboard/s...d.php?t=428035

07-25-2012, 08:12 PM	#13
62 bigwindow Registered User Join Date: Apr 2011 Location: Mocksville NC Posts: 824	Re: WTB high hump floor section thanks I will see if I can find it as well... let me know if run across another Have any idea what trucks these came in originally?

07-29-2012, 01:34 PM	#14
Caudillo64 Registered User Join Date: Jul 2011 Location: Fresno, Ca Posts: 365	Re: WTB high hump floor section Ok here it is I cut out the top part so you wiil have drill out the spot welds. I'm asking $60.00 + shipping. If your zip code is 27208 shipping will be $27.50 and thats parcel post it weights almost 20 pounds and the box will measure 38x22x12. Also since I cut the top out I'll tape the edges with duct tape because they are sharp. So if zip code is correct total wil be $87.50 LMK Attached Images

07-29-2012, 02:38 PM	#15
LostMy65 But Found Her 25yrs Later! Join Date: Oct 2010 Location: Oregon City, Oregon Posts: 10,530	Re: WTB high hump floor section If he passes, what would it be to 97015? Posted via Mobile Device __________________ I lost my 65 - Found it 25 years later: http://67-72chevytrucks.com/vboard/s...d.php?t=426650 66 C20 Service Truck: http://67-72chevytrucks.com/vboard/s...d.php?t=428035

07-29-2012, 05:28 PM	#17
62 bigwindow Registered User Join Date: Apr 2011 Location: Mocksville NC Posts: 824	Re: WTB high hump floor section Yep thats what I am looking for.. but my zip code is 27028 just let me know what the shipping and total will be.. I see you had the zip wrong... thanks so much for addressing this so quickly...

07-29-2012, 06:55 PM	#20
Caudillo64 Registered User Join Date: Jul 2011 Location: Fresno, Ca Posts: 365	Re: WTB high hump floor section *sold thank you 62 BigWindow*



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.