CA 1965 Big window Cutting up - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Caudillo64 · 07-29-2012, 10:50 AM

I bought a 1965 Big back window truck for parts. The cab floor is pertty much gone so I will be cutting it up. Doors $150 ea

Caudillo64 · 07-29-2012, 10:51 AM

couple of more pics

hopped up · 07-29-2012, 11:14 AM

How much for the window regulators, and inside handles?
Posted via Mobile Device

Caudillo64 · 07-29-2012, 01:42 PM

Quote:

Originally Posted by hopped up

How much for the window regulators, and inside handles?
Posted via Mobile Device

Regulators $20 each. inside door handles or window cranks $5 a set + shipping

SoNorth · 07-29-2012, 01:29 PM

How is the section above the windshield? If it's solid, how much for the front foot of the roof? I need the outer section above the windshield and the inner part too.

Caudillo64 · 07-29-2012, 02:04 PM

Quote:

Originally Posted by SoNorth

How is the section above the windshield? If it's solid, how much for the front foot of the roof? I need the outer section above the windshield and the inner part too.

I have a guy coming over next saturday and he's going to work on my cab. he dose patching welind aslo so I"ll get him to cut it out the roof is solid. So do you need just the center section? If so I would want at least $40. + shipping. LMK

SoNorth · 07-29-2012, 02:13 PM

Yeah, I need the outside panel above the windshield. there are seems at each end by the pillars. But I also need the inside part above the windshield. So If you just want to cut the pillars below the seem of the inner roof. Then you could just cut straight across about a foot back from the windshield. I'm definitely interested. You'll have to get me a shipping quote to 54904.

Thanks,
Paul

Caudillo64 · 07-29-2012, 02:35 PM

Quote:

Originally Posted by SoNorth

Yeah, I need the outside panel above the windshield. there are seems at each end by the pillars. But I also need the inside part above the windshield. So If you just want to cut the pillars below the seem of the inner roof. Then you could just cut straight across about a foot back from the windshield. I'm definitely interested. You'll have to get me a shipping quote to 54904.

Thanks,
Paul

I'll have to wait until he cut it out so I can get a weight and package size.

SoNorth · 07-29-2012, 02:50 PM

Sounds good. Just let me know when you find out. I'll PM you my email.

Thanks,
Paul

Indian113 · 07-29-2012, 04:12 PM

What would you want for the back big window section? I have damage on my cab on the back wall close to my gas filler.

Caudillo64 · 07-29-2012, 04:36 PM

Quote:

Originally Posted by Indian113

What would you want for the back big window section? I have damage on my cab on the back wall close to my gas filler.

so do you want the whole section inside and out with corners?

Indian113 · 07-29-2012, 05:28 PM

Yes I believe so,If it can be done easy enough.

Caudillo64 · 07-29-2012, 06:17 PM

Quote:

Originally Posted by Indian113

Yes I believe so,If it can be done easy enough.

I wouldn't know how to ship it?

Indian113 · 07-29-2012, 07:14 PM

Quote:

Originally Posted by Caudillo64

I wouldn't know how to ship it?

Keep me in mind if you can come up with something,Thanks Ray

theastronaut · 07-29-2012, 06:02 PM

What kind of shape is the high hump firewall section in? Price shipped to 29625? Thanks.
Posted via Mobile Device

LostMy65 · 07-29-2012, 06:07 PM

Quote:

Originally Posted by theastronaut

What kind of shape is the high hump firewall section in? Price shipped to 29625? Thanks.
Posted via Mobile Device

He kinda has two of us in line for that here:
http://67-72chevytrucks.com/vboard/s...d.php?t=535394
Posted via Mobile Device

Caudillo64 · 07-29-2012, 06:11 PM

Quote:

Originally Posted by theastronaut

What kind of shape is the high hump firewall section in? Price shipped to 29625? Thanks.
Posted via Mobile Device

on hold awaiting payment

theastronaut · 07-29-2012, 06:20 PM

Quote:

Originally Posted by Caudillo64

on hold awaiting payment

Thanks for the quick reply.
Posted via Mobile Device

Caudillo64 · 07-29-2012, 06:58 PM

Quote:

Originally Posted by Caudillo64

on hold awaiting payment

high hump is sold

thebatii · 07-30-2012, 01:05 AM

how much for the back widow inside cab insert?
or the rear window section?

want to covert a small window cab. thanks frank

Caudillo64 · 07-30-2012, 07:07 AM

Quote:

Originally Posted by thebatii

how much for the back widow inside cab insert?
or the rear window section?

want to covert a small window cab. thanks frank

How about $100

chad64chevy · 07-30-2012, 11:58 PM

Quote:

Originally Posted by Caudillo64

How about $100

if they pass on it, i'll take it!

thebatii · 07-31-2012, 10:30 PM

hes going to pass at this time ...said hes not ready for it yet? what ever that means thank for the reply (big back window 100)

Caudillo64 · 08-01-2012, 07:05 AM

Quote:

Originally Posted by thebatii

hes going to pass at this time ...said hes not ready for it yet? what ever that means thank for the reply (big back window 100)

ok thanks

thebatii · 07-30-2012, 03:03 PM

I'll let my buddy know thanks
Posted via Mobile Device

07-29-2012, 10:50 AM	#1
Caudillo64 Registered User Join Date: Jul 2011 Location: Fresno, Ca Posts: 365	1965 Big window Cutting up I bought a 1965 Big back window truck for parts. The cab floor is pertty much gone so I will be cutting it up. Doors $150 ea Attached Images

07-29-2012, 10:51 AM	#2
Caudillo64 Registered User Join Date: Jul 2011 Location: Fresno, Ca Posts: 365	Re: 1965 Big window Cutting up couple of more pics Attached Images

07-29-2012, 11:14 AM	#3
hopped up Registered User Join Date: Jul 2010 Location: los angeles,ca Posts: 3,617	Re: 1965 Big window Cutting up How much for the window regulators, and inside handles? Posted via Mobile Device

07-29-2012, 01:29 PM	#5
SoNorth Registered User Join Date: Jul 2012 Location: Milwaukee, WI Posts: 13	Re: 1965 Big window Cutting up How is the section above the windshield? If it's solid, how much for the front foot of the roof? I need the outer section above the windshield and the inner part too.

07-29-2012, 02:13 PM	#7
SoNorth Registered User Join Date: Jul 2012 Location: Milwaukee, WI Posts: 13	Re: 1965 Big window Cutting up Yeah, I need the outside panel above the windshield. there are seems at each end by the pillars. But I also need the inside part above the windshield. So If you just want to cut the pillars below the seem of the inner roof. Then you could just cut straight across about a foot back from the windshield. I'm definitely interested. You'll have to get me a shipping quote to 54904. Thanks, Paul

07-29-2012, 02:50 PM	#9
SoNorth Registered User Join Date: Jul 2012 Location: Milwaukee, WI Posts: 13	Re: 1965 Big window Cutting up Sounds good. Just let me know when you find out. I'll PM you my email. Thanks, Paul

07-29-2012, 04:12 PM	#10
Indian113 Registered User Join Date: Sep 2009 Location: Monroe,Iowa Posts: 4,370	Re: 1965 Big window Cutting up What would you want for the back big window section? I have damage on my cab on the back wall close to my gas filler.

07-29-2012, 05:28 PM	#12
Indian113 Registered User Join Date: Sep 2009 Location: Monroe,Iowa Posts: 4,370	Re: 1965 Big window Cutting up Yes I believe so,If it can be done easy enough.

07-29-2012, 06:02 PM	#15
theastronaut Registered User Join Date: May 2011 Location: Anderson SC Posts: 3,901	Re: 1965 Big window Cutting up What kind of shape is the high hump firewall section in? Price shipped to 29625? Thanks. Posted via Mobile Device __________________ Project Goldilocks '66 C10 Short Fleet BBW Build '65 C10 Highly Detailed Stock Restoration Thread '78 Camaro Targa Roof Build '55 International Metal/Body/Paint Work '66 F100 Full Rotisserie Restoration '40 Packard 120 Convertible Coupe Restoration How To Restore and Detail an Original Gauge Cluster How To Detail Sand Body Panels, Edges, Corners, Etc

07-30-2012, 01:05 AM	#20
thebatii Registered User Join Date: Sep 2011 Location: lincoln ca Posts: 27	Re: 1965 Big window Cutting up how much for the back widow inside cab insert? or the rear window section? want to covert a small window cab. thanks frank

07-31-2012, 10:30 PM	#23
thebatii Registered User Join Date: Sep 2011 Location: lincoln ca Posts: 27	Re: 1965 Big window Cutting up hes going to pass at this time ...said hes not ready for it yet? what ever that means thank for the reply (big back window 100)

07-30-2012, 03:03 PM	#25
thebatii Registered User Join Date: Sep 2011 Location: lincoln ca Posts: 27	Re: 1965 Big window Cutting up I'll let my buddy know thanks Posted via Mobile Device



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.