OK EVERYTHING MUST GO - Cabs, Frames, Sheetmetal, Parts, Axles & More - The 1947 - Present Chevrolet & GMC Truck Message Board Network

MoreLoveThanMoney · 08-06-2012, 09:31 PM

Alright my friends it has come time for me to sell off all my parts and pieces I have been collecting for the last two years. I was planning on building a truck and a blazer but somehow life has a different plan for us sometimes. Therefore, everything must go. I have found a great deal of help in this website and have appreciated all of the tips about what to do and what not to do when building these truckks back. You guys have helped me over the last couple of years learn about these trucks and I thank you. Now I just hope that my collection can go out to you guys to help you along with your project.
The list below is about as good as inventory as I can come up with. I am sure I am missing a few things so if you are needing something please let me know. I am guessing at a lot of these prices so if you see something that you think is too high or too low please let me know that as well!!!! I have many Suburban and Blazer Parts as well. Check out the thread in that forum with the ALL MUST GO title. Here we go

Longbed w/ Factory Tool Box on Passenger Side, Have Door for it ??
Transmission Crossmembers - qty 3
Rolling Long Bed 1/2 Ton Frame, 5 Lug Disc Brake Power Steering $350
69 Model Non A/C Cab, Needs Driver Rocker & Corner, No Title $200
?? Model A/C Cab, Needs Rocker & Corners, No Title $300
6 Lug 12 Bolt Rear End for 1/2 Ton Truck $150 Out of 69 Model
Non Tilt Auto Columns - qty 3 $25 ea
Bench Seat Frames - qty 3 $25ea
Complete Non A/C Dashes, Not Cut Up - qty 2 $100ea
Complete A/C Dash, Not Cut Up $150
Step Side Rail Supports, Complete Set $75
Blazer/Suburban Gas Tank - $75ea
Step Side Drivers Bed Side $125
Step Side Front Panels - qty 2 $75ea
Step Side CHEVROLET stamped Tail Gates
4X4 Transmission Tunnel Cover $75
Step Side Short Drivers Side Step $35
Pair of Step Side Long Steps $75
Wide Bed Wheel Housings $25ea
69-72 Hoods - qty 3 $100 to $150
Step Side Drivers Fenders w/ spare cut out - qty 2 $100ea
67-68 Grill Shell $200
72 Grill Assembly w/ Bow Tie $200
69-72 Driver Fender Rust Free - qty 2 $75ea
Drivers Inner Fender $40
Radiator/Core Support Battery Tray Rusted but nothing else $75
67-72 Rear Chrome Bumper $50 Aftermarket
67-70 Chrome Front Bumper $75 Original but needs some edge straightening
Turbo 350 2wd Trans $75
350 4 Bolt Main Block only with Caps $100
Complete 454 Big Block w/ accessories $650
I have many interior pieces, brackets and just other stuff that I havent even gone through yet. So please ask!!

I would be happy to ship any items that are shippable as long as the frieght is paid for. I have a PayPal account for such transactions.

For Pick Up, I am located just outside of Oklahoma City.

Feel free to contact me with any questions or comments at redline5.0junkie@gmail.com

I have posted a few photos of the items above on photobucket. Follow the link and enter the password ( allmustgo ) .
http://s1057.photobucket.com/albums/...%2072%20TRUCK/
If you would like more detailed photos or information please let me know.

Thanks for looking and I hope someone out there can put all of this stuff to good use.
Kenny

HeavyMetalChevy · 08-06-2012, 09:47 PM

info on 700r4 and condition?

71swb4x4 · 08-06-2012, 09:49 PM

Your photo link on both your threads requires a password.

Edit: I am in idiot. I see now that you have provided the password.

robs_c10 · 08-06-2012, 09:51 PM

I need a rear license plate mount and light from one of the bumpers if your willing to sell. 93230

midniteblues · 08-06-2012, 10:06 PM

I will take the best set of shortbed step side steps pending on a reply of the condition ie any rust holes under the fenders or dents anywhere and also shipping please to 19559 thanks

Crash_OK · 08-06-2012, 10:19 PM

Very interested in the front and rear bumpers. Are they new? Do you have pics?

I guess I should say I will take both front and rear bumpers pending pic's and condition.

Crash_OK · 08-07-2012, 06:35 PM

Quote:

Originally Posted by Crash_OK

Very interested in the front and rear bumpers. Are they new? Do you have pics?

I guess I should say I will take both front and rear bumpers pending pic's and condition.

Kenny,

It was good to talk with you this evening. I will pass on the bumpers at this time. Let me know if you come up with the patches I need for my rear side maker lights.

blap · 08-06-2012, 09:50 PM

Have any pics of the doors Interested

70K10Hunter · 08-06-2012, 11:06 PM

I would be interested in the grille!! got any pics?
shipping to 92065?
thanks

Steve Taylor · 08-06-2012, 11:21 PM

Interested in sm465/205 shiping to 43764

HotRod C/10 · 08-06-2012, 11:13 PM

looking for a posi rearend 5 lug or a posi carrier.

Portmod7 · 08-06-2012, 11:24 PM

2nd on the front and rear bumpers pending pics and condition, and if the rear is for a stepside. Sure wish I could find a "patina'd" white one for the rear....

MoreLoveThanMoney · 08-07-2012, 12:09 AM

Not real sure how to reply to all the responses. I'm actually overwhelmed there's so much interest. Thank you guys!!!

The step side steps are excellent, have patina, but excellent.

The bumpers are not new. As best I can tell factory original. I can email pics. They just need a good polishing.

The 700r4 I'm not real sure about. I got it from a guy that wrecked his truck and pulled the drivetrain before scrapping the truck. I was going to have it rebuilt.

I did forget to put on the list an entire step side wood floor bed. No wood or center supports but all 4 sides and fenders are there. It's the blue bed in the pictures.
Posted via Mobile Device

MoreLoveThanMoney · 08-07-2012, 12:13 AM

69 grill is original and it's nice. Has a couple of small dings that are very fixable. Where do I need to send pics too?

Sorry, I do not have an extra 5 lug rear. The only one I have is under the rolling frame.

I will just have to check freight on the trans and transfer case. They are heavy!!! I can send a pic if you like. I'm not sure of working order but the shifters move smoothly. They came out of a farm truck that never left the farm.
Posted via Mobile Device

rusty67 · 08-07-2012, 01:15 AM

I'm in line on the bumpers- Like to look at them soon. Not jumping the gun over anyone but they don't come through- count me in. I'll be in OKC tomorrow evening.

Crash_OK · 08-07-2012, 06:13 AM

Quote:

Originally Posted by MoreLoveThanMoney

Not real sure how to reply to all the responses. I'm actually overwhelmed there's so much interest. Thank you guys!!!

The bumpers are not new. As best I can tell factory original. I can email pics. They just need a good polishing.

Posted via Mobile Device

I live in Edmond, could I come by and look at the bumpers?

extreme505 · 08-22-2012, 12:43 PM

Quote:

Originally Posted by morelovethanmoney

not real sure how to reply to all the responses. I'm actually overwhelmed there's so much interest. Thank you guys!!!

The step side steps are excellent, have patina, but excellent.

The bumpers are not new. As best i can tell factory original. I can email pics. They just need a good polishing.

The 700r4 i'm not real sure about. I got it from a guy that wrecked his truck and pulled the drivetrain before scrapping the truck. I was going to have it rebuilt.

I did forget to put on the list an entire step side wood floor bed. No wood or center supports but all 4 sides and fenders are there. It's the blue bed in the pictures.
posted via mobile device

i need the rear bumper do you have one?

70K10Hunter · 08-07-2012, 12:06 AM

just realized you have two grilles, I'm interested in the 69.

**WIDESIDE72** · 08-07-2012, 08:49 AM

Put me line I the rear bumper. Also, I might be interested in the stepside tailgate, but you didn't list a price.
Posted via Mobile Device

midniteblues · 08-07-2012, 09:38 AM

The steps look and sound just what i'm looking for.use a box or you could tape them together wrap'em in card board take'em to a po or ups
Find out what the shipping would be and please let me know. thanks

coops714x4 · 08-07-2012, 10:40 AM

I'll take the sm465 and np205. I live in Chickasha I can come pick it up. Coop

mcbassin · 08-07-2012, 11:13 AM

in line on the passenger fender and your best set of doors pending pics and group price

mcbassin · 08-07-2012, 11:20 AM

I couldn't find any pics of the fenders or doors but,
I'm Also interested in looking at your cabs and being put in line on the bumpers.
It will be this weekend before I can come look at them.
thanks

70K10Hunter · 08-07-2012, 12:10 PM

pics for the 69 grille to (richkat3@cox.net)
thanks

mytruck70 · 08-07-2012, 12:56 PM

back chrome bumper pics ? and how much shipped ?

08-06-2012, 09:31 PM	#1
MoreLoveThanMoney Registered User Join Date: Nov 2010 Location: Oklahoma City, Ok Posts: 438	EVERYTHING MUST GO - Cabs, Frames, Sheetmetal, Parts, Axles & More Alright my friends it has come time for me to sell off all my parts and pieces I have been collecting for the last two years. I was planning on building a truck and a blazer but somehow life has a different plan for us sometimes. Therefore, everything must go. I have found a great deal of help in this website and have appreciated all of the tips about what to do and what not to do when building these truckks back. You guys have helped me over the last couple of years learn about these trucks and I thank you. Now I just hope that my collection can go out to you guys to help you along with your project. The list below is about as good as inventory as I can come up with. I am sure I am missing a few things so if you are needing something please let me know. I am guessing at a lot of these prices so if you see something that you think is too high or too low please let me know that as well!!!! I have many Suburban and Blazer Parts as well. Check out the thread in that forum with the ALL MUST GO title. Here we go Longbed w/ Factory Tool Box on Passenger Side, Have Door for it ?? Transmission Crossmembers - qty 3 Rolling Long Bed 1/2 Ton Frame, 5 Lug Disc Brake Power Steering $350 69 Model Non A/C Cab, Needs Driver Rocker & Corner, No Title $200 ?? Model A/C Cab, Needs Rocker & Corners, No Title $300 6 Lug 12 Bolt Rear End for 1/2 Ton Truck $150 Out of 69 Model Non Tilt Auto Columns - qty 3 $25 ea Bench Seat Frames - qty 3 $25ea Complete Non A/C Dashes, Not Cut Up - qty 2 $100ea Complete A/C Dash, Not Cut Up $150 Step Side Rail Supports, Complete Set $75 Blazer/Suburban Gas Tank - $75ea Step Side Drivers Bed Side $125 Step Side Front Panels - qty 2 $75ea Step Side CHEVROLET stamped Tail Gates 4X4 Transmission Tunnel Cover $75 Step Side Short Drivers Side Step $35 Pair of Step Side Long Steps $75 Wide Bed Wheel Housings $25ea 69-72 Hoods - qty 3 $100 to $150 Step Side Drivers Fenders w/ spare cut out - qty 2 $100ea 67-68 Grill Shell $200 72 Grill Assembly w/ Bow Tie $200 69-72 Driver Fender Rust Free - qty 2 $75ea Drivers Inner Fender $40 Radiator/Core Support Battery Tray Rusted but nothing else $75 67-72 Rear Chrome Bumper $50 Aftermarket 67-70 Chrome Front Bumper $75 Original but needs some edge straightening Turbo 350 2wd Trans $75 350 4 Bolt Main Block only with Caps $100 Complete 454 Big Block w/ accessories $650 I have many interior pieces, brackets and just other stuff that I havent even gone through yet. So please ask!! I would be happy to ship any items that are shippable as long as the frieght is paid for. I have a PayPal account for such transactions. For Pick Up, I am located just outside of Oklahoma City. Feel free to contact me with any questions or comments at redline5.0junkie@gmail.com I have posted a few photos of the items above on photobucket. Follow the link and enter the password ( allmustgo ) . http://s1057.photobucket.com/albums/...%2072%20TRUCK/ If you would like more detailed photos or information please let me know. Thanks for looking and I hope someone out there can put all of this stuff to good use. Kenny Last edited by MoreLoveThanMoney; 09-29-2012 at 11:28 AM. Reason: Updated Sold Items

08-06-2012, 09:47 PM	#2
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: EVERYTHING MUST GO - Cabs, Frames, Sheetmetal, Parts, Axles & More info on 700r4 and condition? __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog

08-06-2012, 09:49 PM	#3
71swb4x4 Senior Member Join Date: Nov 2003 Location: Brookings, SD Posts: 10,497	Re: EVERYTHING MUST GO - Cabs, Frames, Sheetmetal, Parts, Axles & More Your photo link on both your threads requires a password. Edit: I am in idiot. I see now that you have provided the password. __________________ Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs. Last edited by 71swb4x4; 08-06-2012 at 09:58 PM.

08-06-2012, 09:51 PM	#4
robs_c10 Registered User Join Date: Nov 2011 Location: Hanford, Ca Posts: 86	Re: EVERYTHING MUST GO - Cabs, Frames, Sheetmetal, Parts, Axles & More I need a rear license plate mount and light from one of the bumpers if your willing to sell. 93230

08-06-2012, 10:06 PM	#5
midniteblues Registered User Join Date: Jul 2011 Location: strausstown pa Posts: 3,394	Re: EVERYTHING MUST GO - Cabs, Frames, Sheetmetal, Parts, Axles & More I will take the best set of shortbed step side steps pending on a reply of the condition ie any rust holes under the fenders or dents anywhere and also shipping please to 19559 thanks __________________ 81 camaro 355 4/spd 342 posi my first love. 67 swb step 454/4spd ott 373 posi 4/7 drop. 2000 s10 zr2 little blue truck that never gets stuck. '74 heald super bronc vt8. tecumseh powered moon rover.

08-06-2012, 10:19 PM	#6
Crash_OK Registered User Join Date: Nov 2011 Location: Edmond, OK. Posts: 1,362	Re: EVERYTHING MUST GO - Cabs, Frames, Sheetmetal, Parts, Axles & More Very interested in the front and rear bumpers. Are they new? Do you have pics? I guess I should say I will take both front and rear bumpers pending pic's and condition. __________________ Mark ----------------------- Crash's 69 4x4 SWB Crash's Roof over Lake Home Crash's 1988 Land Cruiser Build Last edited by Crash_OK; 08-06-2012 at 10:28 PM.

08-06-2012, 09:50 PM	#8
blap Registered User Join Date: Nov 2008 Location: bristol,CT Posts: 580	Re: EVERYTHING MUST GO - Cabs, Frames, Sheetmetal, Parts, Axles & More Have any pics of the doors Interested

08-06-2012, 11:06 PM	#9
70K10Hunter Registered User Join Date: Jun 2012 Location: Hill Country Posts: 435	Re: EVERYTHING MUST GO - Cabs, Frames, Sheetmetal, Parts, Axles & More I would be interested in the grille!! got any pics? shipping to 92065? thanks

08-06-2012, 11:21 PM	#10
Steve Taylor Registered User Join Date: Aug 2009 Location: NewLexington,Ohio Posts: 9	Re: EVERYTHING MUST GO - Cabs, Frames, Sheetmetal, Parts, Axles & More Interested in sm465/205 shiping to 43764

08-06-2012, 11:13 PM	#11
HotRod C/10 Registered User Join Date: Feb 2012 Location: Albuquerque NM Posts: 3,053	Re: EVERYTHING MUST GO - Cabs, Frames, Sheetmetal, Parts, Axles & More looking for a posi rearend 5 lug or a posi carrier. __________________ SOLD -77 CHEYENNE SWB, LS SWAPPED -1976 SILVERADO YUBA GOLD/NEUTRAL (2-TONE)

08-06-2012, 11:24 PM	#12
Portmod7 Registered User Join Date: Dec 2004 Location: Aztec, NM Posts: 388	Re: EVERYTHING MUST GO - Cabs, Frames, Sheetmetal, Parts, Axles & More 2nd on the front and rear bumpers pending pics and condition, and if the rear is for a stepside. Sure wish I could find a "patina'd" white one for the rear.... __________________ Super Blue - 1968 C-10 Short Stepside Fastburn 385, 4-Speed Sag. on the Column, Coleman 9" Floater w/Detroit TrueTrac

08-07-2012, 12:09 AM	#13
MoreLoveThanMoney Registered User Join Date: Nov 2010 Location: Oklahoma City, Ok Posts: 438	Re: EVERYTHING MUST GO - Cabs, Frames, Sheetmetal, Parts, Axles & More Not real sure how to reply to all the responses. I'm actually overwhelmed there's so much interest. Thank you guys!!! The step side steps are excellent, have patina, but excellent. The bumpers are not new. As best I can tell factory original. I can email pics. They just need a good polishing. The 700r4 I'm not real sure about. I got it from a guy that wrecked his truck and pulled the drivetrain before scrapping the truck. I was going to have it rebuilt. I did forget to put on the list an entire step side wood floor bed. No wood or center supports but all 4 sides and fenders are there. It's the blue bed in the pictures. Posted via Mobile Device

08-07-2012, 12:13 AM	#14
MoreLoveThanMoney Registered User Join Date: Nov 2010 Location: Oklahoma City, Ok Posts: 438	Re: EVERYTHING MUST GO - Cabs, Frames, Sheetmetal, Parts, Axles & More 69 grill is original and it's nice. Has a couple of small dings that are very fixable. Where do I need to send pics too? Sorry, I do not have an extra 5 lug rear. The only one I have is under the rolling frame. I will just have to check freight on the trans and transfer case. They are heavy!!! I can send a pic if you like. I'm not sure of working order but the shifters move smoothly. They came out of a farm truck that never left the farm. Posted via Mobile Device

08-07-2012, 01:15 AM	#15
rusty67 Registered User Join Date: May 2012 Location: Dallas, TX Posts: 57	Re: EVERYTHING MUST GO - Cabs, Frames, Sheetmetal, Parts, Axles & More I'm in line on the bumpers- Like to look at them soon. Not jumping the gun over anyone but they don't come through- count me in. I'll be in OKC tomorrow evening. Last edited by rusty67; 08-07-2012 at 01:15 AM. Reason: misspelling

08-07-2012, 12:06 AM	#18
70K10Hunter Registered User Join Date: Jun 2012 Location: Hill Country Posts: 435	Re: EVERYTHING MUST GO - Cabs, Frames, Sheetmetal, Parts, Axles & More just realized you have two grilles, I'm interested in the 69.



Register or Log In To remove these advertisements.

08-07-2012, 08:49 AM	#19
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: EVERYTHING MUST GO - Cabs, Frames, Sheetmetal, Parts, Axles & More Put me line I the rear bumper. Also, I might be interested in the stepside tailgate, but you didn't list a price. Posted via Mobile Device

08-07-2012, 09:38 AM	#20
midniteblues Registered User Join Date: Jul 2011 Location: strausstown pa Posts: 3,394	Re: EVERYTHING MUST GO - Cabs, Frames, Sheetmetal, Parts, Axles & More The steps look and sound just what i'm looking for.use a box or you could tape them together wrap'em in card board take'em to a po or ups Find out what the shipping would be and please let me know. thanks __________________ 81 camaro 355 4/spd 342 posi my first love. 67 swb step 454/4spd ott 373 posi 4/7 drop. 2000 s10 zr2 little blue truck that never gets stuck. '74 heald super bronc vt8. tecumseh powered moon rover.

08-07-2012, 10:40 AM	#21
coops714x4 Registered User Join Date: Mar 2011 Location: Cement Oklahoma Posts: 916	Re: EVERYTHING MUST GO - Cabs, Frames, Sheetmetal, Parts, Axles & More I'll take the sm465 and np205. I live in Chickasha I can come pick it up. Coop __________________ 1971 K20, Coop's beast (project) 1972 C30 wrecker, "Big Ernest" (SOLD) 1975 K5 Blazer (wife's toy) she got it in the divorce 2014 Street Glide Special 1983 K20 Big Block, auto (work horse)

08-07-2012, 11:13 AM	#22
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: EVERYTHING MUST GO - Cabs, Frames, Sheetmetal, Parts, Axles & More in line on the passenger fender and your best set of doors pending pics and group price __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

08-07-2012, 11:20 AM	#23
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: EVERYTHING MUST GO - Cabs, Frames, Sheetmetal, Parts, Axles & More I couldn't find any pics of the fenders or doors but, I'm Also interested in looking at your cabs and being put in line on the bumpers. It will be this weekend before I can come look at them. thanks __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

08-07-2012, 12:10 PM	#24
70K10Hunter Registered User Join Date: Jun 2012 Location: Hill Country Posts: 435	Re: EVERYTHING MUST GO - Cabs, Frames, Sheetmetal, Parts, Axles & More pics for the 69 grille to (richkat3@cox.net) thanks

08-07-2012, 12:56 PM	#25
mytruck70 Registered User Join Date: Apr 2012 Location: clayton, NC Posts: 139	Re: EVERYTHING MUST GO - Cabs, Frames, Sheetmetal, Parts, Axles & More back chrome bumper pics ? and how much shipped ?

Register or Log In To remove these advertisements.