|
|
|
08-17-2012, 05:16 PM
|
#1 |
|
Registered User
Join Date: Aug 2009
Location: Grapevine, Texas
Posts: 36
|
Air Vent Replacement
Hey guys,
So, I bought some new vent directors thru LMC, hac veow do I get the old broken air vent direction pieces out of the dash? I got the center out and replaced, I got the pass side out but cant get the new one back in, and I cant figure out how to get the drivers center (by the radio) out. any help would be appreciated..... |
|
|
|
08-17-2012, 09:15 PM
|
#2 |
|
Robert Olson Transport
 
Join Date: Oct 2002
Location: recent transplant to NC USA
Posts: 20,310
|
Re: Air Vent Replacement
use a thin screwdriver to pry them out from the center of the sides and push them in the opposite to install
__________________
Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!! |
|
|
|
|
08-18-2012, 07:00 PM
|
#3 |
|
Registered User
Join Date: Aug 2009
Location: Grapevine, Texas
Posts: 36
|
Re: Air Vent Replacement
The screw driver worked for the pass side and the center, but the drivers side center is made different. the new vent has a different design with big posts on each side. I think the instrument cluster has to come off and they come out from behind maybe??
|
|
|
|
|
08-18-2012, 10:16 PM
|
#4 | |
|
Registered User
Join Date: Jan 2010
Location: Roanoke, Tx.
Posts: 1,561
|
Re: Air Vent Replacement
Quote:
|
|
|
|
|
|
08-18-2012, 11:22 PM
|
#5 |
|
Registered User
Join Date: Aug 2009
Location: Grapevine, Texas
Posts: 36
|
Re: Air Vent Replacement
ok, I took the instrument cluster off and removed the housing for the center vent, the bolts are placed from behind so you have to take the cluster off to get to them. it was a piece of cake at that point.
the pass side was a *****, i cut off the little black tabs on the one end piece, I cant tell what if any function they provide, so I clipped em off to give me more room to push the new vent in. eventually it pushed in right about the point i thought it was gonna break the new part. but I did it! these new vents make an unbelievable difference in overall dash appearance. good parts from LMC, and they look great. |
|
|
|
 |
| Bookmarks |
| Tags |
| ac vents, dash vents |
|
|
Hybrid Mode
