Need Photo OF K10 Transfer Case Bracket

[argonaut]

I'm looking for some photos of the bracket, that mounts the left side of a T-221 transfer case to the upper crossmember. There are two horizontal bolts at the back, and I want to see if the bracket is bolted to the outside of the crossmember or the inside of the crossmember.

[padresag]

Originally Posted by argonaut

I'm looking for some photos of the bracket, that mounts the left side of a T-221 transfer case to the upper crossmember. There are two horizontal bolts at the back, and I want to see if the bracket is bolted to the outside of the crossmember or the inside of the crossmember.

It gives an exploded view of it in the back of the assembly manual
the bracket bolts up to the crossmember.the cast mounting flange off the end off the t/c sits inside the bracket. the mounting bolts come down through that flange and and through the bottom of that bracket and nuts on the bottom

ron

[padresag]

Originally Posted by padresag

It gives an exploded view of it in the back of the assembly manual
the bracket bolts up to the crossmember.the cast mounting flange off the end off the t/c sits inside the bracket. the mounting bolts come down through that flange and and through the bottom of that bracket and nuts on the bottom

ron

ron
flourescent lights put those stripes in there

[argonaut]

So it looks like the bracket fits on the inside and the e-brake bracket on the outside. Cool, thanks!

[padresag]

Originally Posted by argonaut

So it looks like the bracket fits on the inside and the e-brake bracket on the outside. Cool, thanks!

e-brake off the backside

ron