|
|
|
09-01-2012, 06:03 PM
|
#1 |
|
Registered User
Join Date: Jul 2010
Location: San Diego, CA
Posts: 281
|
Clutch Pedal HELP
I swapped cabs on my 77 to a cab from an 87 automatic now Im having an issue with the Z-Bar fitting and where to drill a hole for the clutch rod. Im wondering if anyone has done this and how to solve this problem. I understand that the 87 models had a hydro clutch, but did the cab change in that area too. I hope this can be sorted out any help will be appreciated.
|
|
|
|
09-01-2012, 08:43 PM
|
#2 |
|
Registered User
Join Date: Jul 2010
Location: San Diego, CA
Posts: 281
|
Re: Clutch Pedal HELP
I guess if anyone has a picture of the hole in the firewall that would help out a bunch
|
|
|
|
|
09-01-2012, 09:58 PM
|
#3 |
|
Registered User
Join Date: Feb 2009
Location: slurrey, bc.
Posts: 1,134
|
Re: Clutch Pedal HELP
there should be a dimple right under the pinch weld, right under the steering column. punch it out with a 2" hole saw
__________________
-'73 c/10 - Low with Go - will be complete... probably never. -'90 2wd Blazer - well... soon enough anyways. -'84 SWB - the daily gas guzzler. |
|
|
|
|
09-01-2012, 11:50 PM
|
#4 |
|
Registered User
Join Date: Jul 2010
Location: San Diego, CA
Posts: 281
|
Re: Clutch Pedal HELP
Thanks mongoose, is there anyone out there with a picture of this area?
|
|
|
|
 |
| Bookmarks |
|
|
Hybrid Mode
