Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
|
09-05-2012, 05:28 PM | #1 |
Oh,you can't buy that new
Join Date: Apr 2000
Location: Pennsville,N.J. 08070, USA
Posts: 2,039
|
What rears in a 3/4 ton 4x4.
what diffs would a factory 1964 , 3/4 ton , 4WD, 8 lug truck have in it ? also which transfer case? >>>>>>>>>> I gotta think any 3/4 ton truck from that era would be built pretty hefty. And pretty rare to even find one. thanx , crossy
__________________
"been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone 73 Pinto, stock, w/CragarSS's-eww LOTS of Cummins trucks. |
09-05-2012, 11:17 PM | #2 |
60-66 Nut
Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,252
|
Re: What rears in a 3/4 ton 4x4.
The rear end could be either an Eaton HO52 or a Dana 60. Does it have a drop out 3rd member and a round cover on the back? If so it is an Eaton HO52. The Dana 60 cover will look just like the cover on the front differential, just slightly bigger. I believe the transfer case should be the NP221.
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
09-06-2012, 09:38 AM | #3 |
Special Order
Join Date: Nov 2004
Location: Mt Airy, MD
Posts: 85,851
|
Re: What rears in a 3/4 ton 4x4.
Should be an HO52/Dana44 Rr/Fr combo. The transfer case/transmission combo will be Rockwell T221/SM420,unless it has the standard 3spd on the column. They are very stout and not so common to find. Where is it so I can buy it?
__________________
"BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ |
09-06-2012, 09:47 AM | #4 |
Oh,you can't buy that new
Join Date: Apr 2000
Location: Pennsville,N.J. 08070, USA
Posts: 2,039
|
Re: What rears in a 3/4 ton 4x4.
tim, the truck was flipped and 75% of it is damaged including the cab. he wants too much for it i guess because he bought a crate engine 10K miles ago. I wanted it to put one of my spare cummins into, but the body is toast. i know i can sell off the engine for DECENT money, but once i found that the cab itself was damaged , i kinda wrote it off.
he wants $2500 and it's less than 60 miles from you so if you want the link let me know, thanx, crossy
__________________
"been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone 73 Pinto, stock, w/CragarSS's-eww LOTS of Cummins trucks. |
09-06-2012, 09:37 PM | #5 |
Special Order
Join Date: Nov 2004
Location: Mt Airy, MD
Posts: 85,851
|
Re: What rears in a 3/4 ton 4x4.
Hmmm...I'm getting the hots for one,but good body parts are my main concern. I'd like an original,but I do have a newer 4wd frame/axles/drivetrain already. I'd consider it either way in better economic times,just to have the potential of building an original-ish truck.
__________________
"BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ |
Bookmarks |
|
|