Engine Bracket help (please)

[stroker87]

Hey every one

I started to get the engine back in my truck last weekend but could not fine my engine mount brackets (brackets the bolt to the engine) I found a local guy on CL selling some from a 70's truck would they work in my 87 8v?

he says there all the same i'm clue less?

thanks

[88Jimmy4x4]

small blocks are all the same unless the brackets (clamshells) are from a car

just fyi you can buy them new aftermarket and all over ebay if the CL doesnt pan out

[stroker87]

Originally Posted by 88Jimmy4x4

small blocks are all the same unless the brackets (clamshells) are from a car

just fyi you can buy them new aftermarket and all over ebay if the CL doesnt pan out

far as i know its the stock truck brackets

any one have a pic of some they can post?

[CoggedBelt75]

I'm assuming it's a 350
http://www.oreillyauto.com/site/c/de...2327&ppt=C0019

http://www.oreillyauto.com/site/c/de...2327&ppt=C0019

[stroker87]

Originally Posted by CoggedBelt75

I'm assuming it's a 350

yes sorry it is or was 383 now

is there a right and left or dont matter?

[CoggedBelt75]

Small block then....O'Reilly's or Autozone can fix you up

[1981Stepside]

If you're missing the steel clamshell (the half that bolts to the block):



then the clamshells from a 73 and up truck will work.
Right and left should be the same IIRC.

If you're missing the other half of the mount (the steel and rubber half the bolts to the frame) then go to the part stores

[stroker87]

Originally Posted by 1981Stepside

If you're missing the steel clamshell (the half that bolts to the block):



then the clamshells from a 73 and up truck will work.
Right and left should be the same IIRC.

If you're missing the other half of the mount (the steel and rubber half the bolts to the frame) then go to the part stores

thank you for the picture thats what I'm talking about, I picked up the pair the guy was selling ($10 for the pair) it was worth the gamble its the same one you have pictured but you have a 2nd bracket be hind it (sandwiched be tween the block and steel clamshell I dont remember having that?


thanks to every one else also for taking time out to help!

[hopelessredneck]

and BB are the same as the SB did a 454 to 350 swap and they fit like a glove

[sierra4x4]

4wd's use car mounts with a plate behind them like in 1981Stepside's picture. 2wd mounts are different slightly different. the 2wds all interchange from 73-87. the 4wd's interchange 73-87 and cars 73-87 maybe newer. Also as previously mentioned both big block and small block are the same.

[1981Stepside]

sorry, should have specified the 4X4 in the pic - just a random grabbed from google

[88Jimmy4x4]

they should be part number 334601 and 334602 , the nut end goes to front

[Bmstd]

Can you tell me what the physical difference (if any) there is between the 334601 and the 334602?

Having slight alignment issue with engine fan setting closer to right side of shroud. I have the 334601 on the right (passenger) side of the engine block and the part number on opposite side is not ledgible, but i am assuming it is the 334602. This engine with mounts and all brackets came out of one owner stock 350ci 77 chevrolet C10.

Did i screw up and need to reverse these two mounts left to right to fix my issue?