IN 1961 ? GMC 4000 Parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Todd68Chevy** · 09-21-2012, 08:49 PM

I have a GMC 4000 truck that I am parting out. I am including pictures and if there is something you see that you are interested in let me know. The body is VERY rusty and I do not see any body panels that are usable unless they have a piece that would make a patch panel. It is a V6 but I am keeping the engine but I do not need the accy. or brackets.

V6 fender emblems- painted SOLD
Radio delete- surface rust, clips broken $12.00
Steering Wheel- decent- some cracks $20.00
Horn Button $15.00
Grille letters and bracket- painted SOLD
Hood to grille filler panels w/ center part $25.00 for pair
Headlight wiring harness- from core support to all 4 headlights $15.00
Inside door panels $20.00 each
Headlight trim rings and buckets $25.00 for all 4

All prices are plus shipping. I need zip code to figure shipping

Thanks for looking and ask about anything else.

**Todd68Chevy** · 09-21-2012, 08:55 PM

A few more pictures.

**chevy_man5** · 09-21-2012, 10:24 PM

I definitely would like the emblems.

Does the truck have a choke cable, and if so, does it have the grey knob? If yes to both, how much do you want for it?

Also, are the lenses cracked in the parking lights in the hood? If not, what would you want for them, with the housings? Even if they are cracked, how much do you want for them?

My zip code is 83642.

Thanks!

LostMy65 · 09-21-2012, 10:36 PM

Does it have the metal fan shroud?
Posted via Mobile Device

**chevy_man5** · 09-21-2012, 10:43 PM

What would it cost in shipping to throw the grill letters and bracket in too?

**Todd68Chevy** · 09-21-2012, 10:56 PM

Quote:

Originally Posted by chevy_man5

I definitely would like the emblems.

Does the truck have a choke cable, and if so, does it have the grey knob? If yes to both, how much do you want for it?

Also, are the lenses cracked in the parking lights in the hood? If not, what would you want for them, with the housings? Even if they are cracked, how much do you want for them?

My zip code is 83642.

Thanks!

I will get stuff checked better tomorrow.

Quote:

Originally Posted by LostMy65

Does it have the metal fan shroud?
Posted via Mobile Device

I am not sure. I attached a picture but I will look tomorrow.

Quote:

Originally Posted by chevy_man5

What would it cost in shipping to throw the grill letters and bracket in too?

I will figure it both ways.

**chevy_man5** · 09-21-2012, 11:06 PM

Choke knob looks grey in that picture and that parking lens looks good! Just need pricing.

Would you consider just selling the grill letters, and not the bracket?

**Todd68Chevy** · 09-22-2012, 11:15 PM

Quote:

Originally Posted by chevy_man5

I definitely would like the emblems.

Does the truck have a choke cable, and if so, does it have the grey knob? If yes to both, how much do you want for it?

Also, are the lenses cracked in the parking lights in the hood? If not, what would you want for them, with the housings? Even if they are cracked, how much do you want for them?

My zip code is 83642.

Thanks!

Quote:

Originally Posted by chevy_man5

What would it cost in shipping to throw the grill letters and bracket in too?

Quote:

Originally Posted by chevy_man5

Choke knob looks grey in that picture and that parking lens looks good! Just need pricing.

Would you consider just selling the grill letters, and not the bracket?

Here are some more pictures. The paking lights are usable but the housings are rusty and the lenses are not perfect. The passenger side has a hole in the bottom of the lense. The choke cable is broken and the cable and housing are shorter than they should be. The knob looks like it is in good physical shape but it pulled off of the end of the cable. It does not look broken to me but does not hold as tight as it should.
For the V6 emblems, Grille letters, Choke and parking lights. $75.00 plus shipping. Shipping would be $13.50 Parcel Post with the bracket or $11.35 Priority Mail with out the grille bracket.

**Todd68Chevy** · 09-22-2012, 11:27 PM

One more choke cable picture.

Quote:

Originally Posted by LostMy65

Does it have the metal fan shroud?
Posted via Mobile Device

Yes it does have a metal fan shroud. The shroud is in pretty good shape and even has the material around the edge but it has an area around the fan open that is messed up- bent, damage or something. $35.00 plus shipping.

**chevy_man5** · 09-23-2012, 12:24 AM

How much shorter is the choke cable? Mine was cut off at the firewall, so I cannot verify how long it is supposed to be.

Sorry for all the questions!!

LostMy65 · 09-23-2012, 11:35 AM

Thanks for the pics.
I'm looking for the one that looks like it was made from a 55 gallon drum.
Posted via Mobile Device

**Todd68Chevy** · 09-23-2012, 01:02 PM

Quote:

Originally Posted by chevy_man5

How much shorter is the choke cable? Mine was cut off at the firewall, so I cannot verify how long it is supposed to be.

Sorry for all the questions!!

No problem on the questions. I would say 4 inches is missing from the outer housing and 6 inches from the inner cable.

Quote:

Originally Posted by LostMy65

Thanks for the pics.
I'm looking for the one that looks like it was made from a 55 gallon drum.
Posted via Mobile Device

No problem, thanks for asking.

**chevy_man5** · 09-23-2012, 01:19 PM

OK, lets go for it! Parking lenses and housings, Fender Emblems, Grille letters and bracket, and the choke cable. I might as well take the bracket too, so I'll go for the parcel post.

Looks like I owe you $88.50. Do you use paypal? If so, you can IM me your address, and I will send it today! If not, let me know where you want me to send the money.

I'll be off and running for a while today, but will check in later tonight.

Thanks!!

**Todd68Chevy** · 09-23-2012, 03:12 PM

Quote:

Originally Posted by chevy_man5

OK, lets go for it! Parking lenses and housings, Fender Emblems, Grille letters and bracket, and the choke cable. I might as well take the bracket too, so I'll go for the parcel post.

Looks like I owe you $88.50. Do you use paypal? If so, you can IM me your address, and I will send it today! If not, let me know where you want me to send the money.

I'll be off and running for a while today, but will check in later tonight.

Thanks!!

PM sent, Thanks

**chevy_man5** · 09-23-2012, 09:19 PM

Money sent! Thank you!

Joemomma1 · 09-23-2012, 09:43 PM

power steering pump/bracket and pulley? 93705.

Thanks.

**Todd68Chevy** · 09-24-2012, 07:59 AM

Quote:

Originally Posted by Joemomma1

power steering pump/bracket and pulley? 93705.

Thanks.

I will need to remove them to get a shipping quote but I am asking $100.00 plus shipping for the power steering pump, pump pulley and brackets. The engine does not run so I can not check the pump operation. I have also been told this set up will not work on a 1/2 truck engine because this engine has a tall water pump. I am not sure if other stuff can be changed to make it work or not but it does look different then the other p/s pumps I have seen on other V6 trucks in pictures. If you are still interested in the p/s, do you need any other pulleys?

Thanks, Todd

nwaesmith · 09-27-2012, 10:44 PM

do you still have the headlight bezels? shipping to 42262

**Todd68Chevy** · 09-28-2012, 06:35 AM

Quote:

Originally Posted by nwaesmith

do you still have the headlight bezels? shipping to 42262

If you are talking about the trim that surrounds the headlights and attaches to the grill, they were very rusted and not worth saving. I do have the buckets and the trim rings that the headlight bulb fastens into. Thanks

Joemomma1 · 09-28-2012, 03:45 PM

I will pass, thanks for the promt response.

**Todd68Chevy** · 09-29-2012, 08:17 AM

Quote:

Originally Posted by Joemomma1

I will pass, thanks for the promt response.

Thanks, Have a good weekend.

Some more information I found out about the p/s set up. I was told the front cover of the engine will bolt up to any V6 engine, so that would let the tall water pump be installed on a 1/2 ton engine and I was told that a tall water pump set up will fit under the hood of a 60-66 truck. So with everything up front this should work on a 1/2 ton truck. I am wanting to keep the engine so I really do not want to seperate the front cover from the engine unless I had another one to install back on it.

**chevy_man5** · 10-02-2012, 01:13 PM

Bump for Todd.

Just got the box with all of the parts. Everything looks great!!

**Todd68Chevy** · 10-02-2012, 06:15 PM

Quote:

Originally Posted by chevy_man5

Bump for Todd.

Just got the box with all of the parts. Everything looks great!!

Great to hear. Thanks again

Low61projekt · 10-04-2012, 11:41 AM

Hey. Whats the condition on the stainless of those vent windows?? Pics of those possibly.. I may be interested in the driver side as mine is rotted away. If you can do a deal on the set I may just do that. Thanks.

**Todd68Chevy** · 10-04-2012, 11:55 AM

Quote:

Originally Posted by Low61projekt

Hey. Whats the condition on the stainless of those vent windows?? Pics of those possibly.. I may be interested in the driver side as mine is rotted away. If you can do a deal on the set I may just do that. Thanks.

I can get pictures tonight. Thanks

09-21-2012, 08:49 PM	#1
Todd68Chevy Senior Member Join Date: Oct 2009 Location: Shelburn Indiana Posts: 3,975	1961 ? GMC 4000 Parts I have a GMC 4000 truck that I am parting out. I am including pictures and if there is something you see that you are interested in let me know. The body is VERY rusty and I do not see any body panels that are usable unless they have a piece that would make a patch panel. It is a V6 but I am keeping the engine but I do not need the accy. or brackets. V6 fender emblems- painted SOLD Radio delete- surface rust, clips broken $12.00 Steering Wheel- decent- some cracks $20.00 Horn Button $15.00 Grille letters and bracket- painted SOLD Hood to grille filler panels w/ center part $25.00 for pair Headlight wiring harness- from core support to all 4 headlights $15.00 Inside door panels $20.00 each Headlight trim rings and buckets $25.00 for all 4 All prices are plus shipping. I need zip code to figure shipping Thanks for looking and ask about anything else. Attached Images __________________ Note: All parts I have for sale are also for sale locally. I currently own: 1940 Chevy Fire truck (project), 1946 Chevy truck (project), 1946 Chevy 1 Ton pick up, 1953 Chevy school bus (storage area), 1968 Chevy C10 (I have drove for 26 years), 1994 Chevy C2500 (daily driver), 2005 GMC crew cab K2500 (parts hauler) and more trucks for parts. Last edited by Todd68Chevy; 10-04-2012 at 11:55 AM. Reason: parts sold

09-21-2012, 08:55 PM	#2
Todd68Chevy Senior Member Join Date: Oct 2009 Location: Shelburn Indiana Posts: 3,975	Re: 1961 ? GMC 4000 Parts A few more pictures. Attached Images __________________ Note: All parts I have for sale are also for sale locally. I currently own: 1940 Chevy Fire truck (project), 1946 Chevy truck (project), 1946 Chevy 1 Ton pick up, 1953 Chevy school bus (storage area), 1968 Chevy C10 (I have drove for 26 years), 1994 Chevy C2500 (daily driver), 2005 GMC crew cab K2500 (parts hauler) and more trucks for parts.

09-21-2012, 10:24 PM	#3
chevy_man5 GMC's n H.D.'s too! Join Date: Oct 2010 Location: Nampa, Idaho Posts: 1,583	Re: 1961 ? GMC 4000 Parts I definitely would like the emblems. Does the truck have a choke cable, and if so, does it have the grey knob? If yes to both, how much do you want for it? Also, are the lenses cracked in the parking lights in the hood? If not, what would you want for them, with the housings? Even if they are cracked, how much do you want for them? My zip code is 83642. Thanks! __________________ Jason 1960 GMC 4x4 Babe (the Blue Ox) - Build Thread

09-21-2012, 10:36 PM	#4
LostMy65 But Found Her 25yrs Later! Join Date: Oct 2010 Location: Oregon City, Oregon Posts: 10,530	Re: 1961 ? GMC 4000 Parts Does it have the metal fan shroud? Posted via Mobile Device __________________ I lost my 65 - Found it 25 years later: http://67-72chevytrucks.com/vboard/s...d.php?t=426650 66 C20 Service Truck: http://67-72chevytrucks.com/vboard/s...d.php?t=428035

09-21-2012, 10:43 PM	#5
chevy_man5 GMC's n H.D.'s too! Join Date: Oct 2010 Location: Nampa, Idaho Posts: 1,583	Re: 1961 ? GMC 4000 Parts What would it cost in shipping to throw the grill letters and bracket in too? __________________ Jason 1960 GMC 4x4 Babe (the Blue Ox) - Build Thread

09-21-2012, 11:06 PM	#7
chevy_man5 GMC's n H.D.'s too! Join Date: Oct 2010 Location: Nampa, Idaho Posts: 1,583	Re: 1961 ? GMC 4000 Parts Choke knob looks grey in that picture and that parking lens looks good! Just need pricing. Would you consider just selling the grill letters, and not the bracket? __________________ Jason 1960 GMC 4x4 Babe (the Blue Ox) - Build Thread

09-23-2012, 12:24 AM	#10
chevy_man5 GMC's n H.D.'s too! Join Date: Oct 2010 Location: Nampa, Idaho Posts: 1,583	Re: 1961 ? GMC 4000 Parts How much shorter is the choke cable? Mine was cut off at the firewall, so I cannot verify how long it is supposed to be. Sorry for all the questions!! __________________ Jason 1960 GMC 4x4 Babe (the Blue Ox) - Build Thread

09-23-2012, 11:35 AM	#11
LostMy65 But Found Her 25yrs Later! Join Date: Oct 2010 Location: Oregon City, Oregon Posts: 10,530	Re: 1961 ? GMC 4000 Parts Thanks for the pics. I'm looking for the one that looks like it was made from a 55 gallon drum. Posted via Mobile Device __________________ I lost my 65 - Found it 25 years later: http://67-72chevytrucks.com/vboard/s...d.php?t=426650 66 C20 Service Truck: http://67-72chevytrucks.com/vboard/s...d.php?t=428035

09-23-2012, 01:19 PM	#13
chevy_man5 GMC's n H.D.'s too! Join Date: Oct 2010 Location: Nampa, Idaho Posts: 1,583	Re: 1961 ? GMC 4000 Parts OK, lets go for it! Parking lenses and housings, Fender Emblems, Grille letters and bracket, and the choke cable. I might as well take the bracket too, so I'll go for the parcel post. Looks like I owe you $88.50. Do you use paypal? If so, you can IM me your address, and I will send it today! If not, let me know where you want me to send the money. I'll be off and running for a while today, but will check in later tonight. Thanks!! __________________ Jason 1960 GMC 4x4 Babe (the Blue Ox) - Build Thread

09-23-2012, 09:19 PM	#15
chevy_man5 GMC's n H.D.'s too! Join Date: Oct 2010 Location: Nampa, Idaho Posts: 1,583	Re: 1961 ? GMC 4000 Parts Money sent! Thank you! __________________ Jason 1960 GMC 4x4 Babe (the Blue Ox) - Build Thread

09-23-2012, 09:43 PM	#16
Joemomma1 Registered User Join Date: Mar 2009 Location: CA Posts: 814	Re: 1961 ? GMC 4000 Parts power steering pump/bracket and pulley? 93705. Thanks.

09-27-2012, 10:44 PM	#18
nwaesmith Registered User Join Date: Mar 2011 Location: Oak Grove, KY Posts: 26	Re: 1961 ? GMC 4000 Parts do you still have the headlight bezels? shipping to 42262

09-28-2012, 03:45 PM	#20
Joemomma1 Registered User Join Date: Mar 2009 Location: CA Posts: 814	Re: 1961 ? GMC 4000 Parts I will pass, thanks for the promt response.

10-02-2012, 01:13 PM	#22
chevy_man5 GMC's n H.D.'s too! Join Date: Oct 2010 Location: Nampa, Idaho Posts: 1,583	Re: 1961 ? GMC 4000 Parts Bump for Todd. Just got the box with all of the parts. Everything looks great!! __________________ Jason 1960 GMC 4x4 Babe (the Blue Ox) - Build Thread

10-04-2012, 11:41 AM	#24
Low61projekt Registered User Join Date: Apr 2012 Location: Piscataway, NJ Posts: 19	Re: 1961 ? GMC 4000 Parts Hey. Whats the condition on the stainless of those vent windows?? Pics of those possibly.. I may be interested in the driver side as mine is rotted away. If you can do a deal on the set I may just do that. Thanks.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.