87 VIN issue???

[rs72z]

My brother has a 87 swb 4x4 that the vin tag and the emission tag both show to have a 305. But the rpo sticker in the glove says it has a 350. Which is right?
The truck is original and appears that the engine has never been out, the truck also has original paint.
Thanks

[Ski-me]

What are the codes in question? RPO code that says 350 and what is the VIN number?

That might help narrow it down.

[Keith Seymore]

Originally Posted by Ski-me

What are the codes in question? RPO code that says 350 and what is the VIN number?

That might help narrow it down.

x2 - agree. A little more detail would help.

Photos of the VIN tag, emission label and SPID would be great.

Keep in mind it's very easy to swap a glovebox, so check and verify the SPID goes with the truck you have.

K

[Ski-me]

Originally Posted by Keith Seymore

x2 - agree. A little more detail would help.

Photos of the VIN tag, emission label and SPID would be great.

Keep in mind it's very easy to swap a glovebox, so check and verify the SPID goes with the truck you have.

K

Good point. Verify that the VIN on the glove box matches the VIN of the truck. My first take, I would think it's a 350. I thought the 305 "phase" was in the early and mid 80's. 1987 was the first year of the fuel injection and the engines I'm aware of were 350's.

[Ski-me]

Well, I guess 305's were offered in 87......

VIN Plate Decoding Information
1st Digit
NATION OF ORIGIN
1 = USA
2 = CANADA
3 = MEXICO

2nd Digit
MANIFACTURER
G = GENERAL MOTORS

3th Digit
MAKE
C = CHEVROLET
T = GMC

4th Digit
GVWR & Brake System
B = 3001-4000/HYDRAULIC
C = 4001-5000/HYDRAULIC
D = 5001-6000/HYDRAULIC

5th Digit
BODY STYLE
R = CONVENTIONAL CAB 2WD
V = CONVENTIONAL CAB 4WD

6th Digit
SERIES
1 = 1/2 Ton
2 = 3/4 Ton
3 = 1 Ton

7th Digit
BODY TYPE
6 = SUBURBAN
8 = BLAZER, JIMMY

8th Digit
ENGINE
H = 5.0L (305 CID) FI L03
K = 5.7L (350 CID) TBI LO5
C = 6.2L (379 CID) DIESEL MFI LH6

9th Digit
CHECK DIGIT
0 Thru 9 or X

10th Digit
YEAR H = 1987

12th to 17th Digit SEQUENCE NUMBERS

[Keith Seymore]

Yes - 305 was available in '87 as RPO LE9 (EFI/TBI).

K

[64fleetside]

Which engine is actually in the truck?

[rs72z]

Originally Posted by 64fleetside

Which engine is actually in the truck?

That's what we are trying to figure out.
Posted via Mobile Device

[64fleetside]

Drive it. Shouild be obvious.

[Ski-me]

What about finding the block number? From my armchair research, it's located on the block, driver's side, back, on top of the bell housing flange.

Here is a site that might help deciphering it:

http://www.chevy-camaro.com/chevy-ca...es.asp?group=1

[64fleetside]

Block casting number would eliminate any guesswork.

[Ski-me]

A few years ago I was trying to find out what engine was in my 89' K5. I found the following info on my block:

So the numbers I could find:
Front passenger side just behind AC compressor - V1112UKA
Under side on block cast - 683
Under side on block towards the top -
627
56
N

The answer I got was:

V1112UKA

V = built in the Flint plant, 11 = November, 12 = 12th day of November, UKA = 1981 350 con. cab, m/t, A.I.R. P LF5 150 2 C-30 & 3500,159.5WB

The P LF5 is the partial VIN, the 150 is the HP rating, and the 2 means 2 BBL carb.

I think this site was used for part of the number above:

http://www.nastyz28.com/gm-chevy-cod...s-suffix-9.php

So basically, I guess I have an 81' block in my 89' Blazer.