The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Suspension > Suspension Marketplace

Web 67-72chevytrucks.com



Closed Thread
 
Thread Tools Display Modes
Old 11-04-2012, 11:09 AM   #1
GEARBOXGARAGE
Registered User
 
Join Date: Sep 2011
Location: Sturgis, Michigan
Posts: 509
HD Chromoly Panhard Bars

The Gearbox Garage announces the introduction of their G-TR Precicion Components Heavy Duty Double-adjust Chromoly Panhard Bars for '65-72 GM Trucks with coil spring rear suspension with 0"-4" of drop. Introductory retail price is $119.99, forum members save 10%, making the price $107.99. Each kit comes complete with QA1 XM Series Rod Ends and all necessary Grade 8 Hardware to install and are Black Powdercoated.
Attached Images
  
GEARBOXGARAGE is offline  
Old 11-06-2012, 10:30 AM   #2
Custom 68
Registered User
 
Custom 68's Avatar
 
Join Date: Nov 2001
Location: Springfield, MO
Posts: 2,939
Re: HD Chromoly Panhard Bars

a couple questions:
does this mount in the factory location? and is factory length (only adjustable) or is this a long bar with the additional brackets to mount from side to side? Any install pics?
Thanks
Dave
__________________
Dave
1968 Custom Chevy with turbo charged 5.3 gen III 4l80e swap
1967-71 GMC 3/4 ton long step 4x4 (not sure what year exactly?)
"A good friend will bail you out of jail...but a true friend will be sitting next to you saying "that was frekin awesome".
"If it doesn't fit force it...If it breaks then it needed to be replaced anyway!"
Custom 68 is offline  
Old 11-06-2012, 01:15 PM   #3
GEARBOXGARAGE
Registered User
 
Join Date: Sep 2011
Location: Sturgis, Michigan
Posts: 509
Re: HD Chromoly Panhard Bars

Dave,

Yes, this mounts in the factory location for "mild" drop applications of 4" or less. They adjust at both ends through RH and LH threaded Chromoly Rod Ends, so there is no need to remove one end to adjust the position of the rear-end. Just install each end, adjust to desired length, and tighten the jam nuts. I will post up some install pics this evening or early tomorrow.

Thanks,

Mike
GEARBOXGARAGE is offline  
Old 11-06-2012, 07:18 PM   #4
SCOTI
Registered User
 
SCOTI's Avatar
 
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 22,066
Re: HD Chromoly Panhard Bars

A short 'easily' adjustable PHB has been sorely missed in the market. Kudos for stepping up & filling the need.
__________________
67SWB-B.B.RetroRod
64SWB-Recycle
89CCDually-Driver/Tow Truck
99CCSWB Driver
All Fleetsides
@rattlecankustoms in IG

Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive.
It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar.....

Cubic inches is like Indiana Jones with a cheap pistol.
SCOTI is offline  
Old 11-06-2012, 08:21 PM   #5
chapster
Registered User
 
chapster's Avatar
 
Join Date: Jul 2005
Location: ..
Posts: 455
Re: HD Chromoly Panhard Bars

Quote:
Originally Posted by SCOTI View Post
A short 'easily' adjustable PHB has been sorely missed in the market. Kudos for stepping up & filling the need.
X2

Also really nice to see the hardware as a kit because it is very frustrating dealing with missing hardware and having to wait weeks/months for replacements.

Nice job!
__________________
1967 GMC shorty Parts Pile: NoLimit, Accu Air, Kore 3, Matts Classic Bowtie, March Performance, Lokar, ScottsHot Rods, Vintage Air, American Auto Wire, Circle D, Accu Air, Borla, Budnik, Ididit, One Piece Windows, Doug Thorley, Pypes, AutoLoc, Porterbuilt, CPP, Dynamat, Dakota Digital, Fesler

1968 Chevy c10 shorty Stepper (Patina LS project)
1967 gmc custom Long Box (Farm Truck Project)
chapster is offline  
Old 11-07-2012, 09:45 AM   #6
GEARBOXGARAGE
Registered User
 
Join Date: Sep 2011
Location: Sturgis, Michigan
Posts: 509
Re: HD Chromoly Panhard Bars

Thanks, guys! Yeah, we are trying to make our kits as complete as possible, this does increase the cost a little, but much better in the end for the customer.

P.S. We will be posting some install pics later today!
GEARBOXGARAGE is offline  
Old 11-07-2012, 10:08 AM   #7
Custom 68
Registered User
 
Custom 68's Avatar
 
Join Date: Nov 2001
Location: Springfield, MO
Posts: 2,939
Re: HD Chromoly Panhard Bars

Yes this is great news, thanks for the info.
__________________
Dave
1968 Custom Chevy with turbo charged 5.3 gen III 4l80e swap
1967-71 GMC 3/4 ton long step 4x4 (not sure what year exactly?)
"A good friend will bail you out of jail...but a true friend will be sitting next to you saying "that was frekin awesome".
"If it doesn't fit force it...If it breaks then it needed to be replaced anyway!"
Custom 68 is offline  
Old 11-07-2012, 09:10 PM   #8
GEARBOXGARAGE
Registered User
 
Join Date: Sep 2011
Location: Sturgis, Michigan
Posts: 509
Re: HD Chromoly Panhard Bars

Install pics on a '66 with 4" drop springs.....
Attached Images
  
GEARBOXGARAGE is offline  
Old 12-06-2012, 03:44 PM   #9
GEARBOXGARAGE
Registered User
 
Join Date: Sep 2011
Location: Sturgis, Michigan
Posts: 509
Re: HD Chromoly Panhard Bars

Still have some of our HD Panhard Bars under the introductory pricing. Forum member price $107.99!
GEARBOXGARAGE is offline  
Old 01-03-2013, 01:33 AM   #10
mikey2409
Registered User
 
Join Date: Dec 2012
Location: Bell Gardens Ca
Posts: 151
Re: HD Chromoly Panhard Bars

Are those panhard bars single or dual sided on the adjuster
Posted via Mobile Device
mikey2409 is offline  
Old 01-03-2013, 09:38 AM   #11
GEARBOXGARAGE
Registered User
 
Join Date: Sep 2011
Location: Sturgis, Michigan
Posts: 509
Re: HD Chromoly Panhard Bars

Quote:
Originally Posted by mikey2409 View Post
Are those panhard bars single or dual sided on the adjuster
Posted via Mobile Device
They are adjustable at both ends, with right and left hand threaded rod ends so the length can be adjusted without removing from the truck.
GEARBOXGARAGE is offline  
Old 04-02-2013, 09:30 PM   #12
GEARBOXGARAGE
Registered User
 
Join Date: Sep 2011
Location: Sturgis, Michigan
Posts: 509
Re: HD Chromoly Panhard Bars

Our Extended "Series 2" Panhard Bars are ready to release! They will offer the same quality TIG welded 1-1/4" Chrome-moly tubes and XM Series Rod Ends at both ends to simplify adjustability. All necessary Grade 8 hardware is included, as well as new U-bolts. The trailing arm mount provides 3 holes to adjust roll center, and also moving the mounting point back for a high clearance design when running large diff covers while maintaining a straight bar. Bars and mounting brackets come in Satin Black Powder Coat finish. Retail price is set at $189.99, with forum member discounts set at $15 off!
Attached Images
  
GEARBOXGARAGE is offline  
Old 12-07-2013, 10:51 AM   #13
GEARBOXGARAGE
Registered User
 
Join Date: Sep 2011
Location: Sturgis, Michigan
Posts: 509
Re: HD Chromoly Panhard Bars

Christmas Special Get free shipping along with Forum member pricing of $107.99 on our Series 1 Chrome-moly Panhard Bars. They're fully TIG Welded with an integrated wrench hex on one end for easy tightening of the jam nuts and come Satin Black powder coated. XM Series Chrome-moly heim joints at both ends making adjustments quick and easy without having to unbolt them from the chassis. All Grade 8 mounting hardware is included. These are for stock to mild drops of 4" or less.
Attached Images
   
GEARBOXGARAGE is offline  
Old 12-07-2013, 12:24 PM   #14
SCOTI
Registered User
 
SCOTI's Avatar
 
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 22,066
Re: HD Chromoly Panhard Bars

What is the range of length for the shorter bar (for the 6x-72 app)?
Do or can you make 'custom lengths'?
What size are the retaining bolts?

I have a custom app. I noticed this & remembered the OE 6x-72 bars are pretty close to what I need.
__________________
67SWB-B.B.RetroRod
64SWB-Recycle
89CCDually-Driver/Tow Truck
99CCSWB Driver
All Fleetsides
@rattlecankustoms in IG

Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive.
It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar.....

Cubic inches is like Indiana Jones with a cheap pistol.
SCOTI is offline  
Old 12-08-2013, 06:39 AM   #15
chevy-fun
Registered User
 
chevy-fun's Avatar
 
Join Date: Jun 2011
Location: Arlington, Tx
Posts: 338
Re: HD Chromoly Panhard Bars

anything for 73-87 trucks. like to have one for my 10 bolt. prefer a bolt on kit. something similar to ridetech bolt on one in their 4 link kit. but they don't sell it separately.
chevy-fun is offline  
Old 12-09-2013, 09:37 AM   #16
GEARBOXGARAGE
Registered User
 
Join Date: Sep 2011
Location: Sturgis, Michigan
Posts: 509
Re: HD Chromoly Panhard Bars

SCOTI - The range is approximately 23-1/4" to 24-1/2" with 5/8" bolts to attach the heim joints to the frame. Currently, we are not producing custom lengths.

chevy-fun - Sorry, we don't have anything similar to that bracket at this time.
GEARBOXGARAGE is offline  
Old 12-16-2013, 03:46 PM   #17
Number98
Prestige Worldwide
 
Number98's Avatar
 
Join Date: Feb 2001
Location: Worldwide
Posts: 2,552
Re: HD Chromoly Panhard Bars

Do you know if your extended bar will clear the PML Style covers that are deeper for more fluid?

Here is a link to the cover I am referring to: http://www.yourcovers.com/diffcover_6058.php

Thanks,
Jason
Number98 is offline  
Old 12-16-2013, 06:30 PM   #18
GEARBOXGARAGE
Registered User
 
Join Date: Sep 2011
Location: Sturgis, Michigan
Posts: 509
Re: HD Chromoly Panhard Bars

Quote:
Originally Posted by Number98 View Post
Do you know if your extended bar will clear the PML Style covers that are deeper for more fluid?

Here is a link to the cover I am referring to: http://www.yourcovers.com/diffcover_6058.php

Thanks,
Jason
Jason,

I can't say for sure as I haven't used these specific covers. We created a mounting point on the trailing arm bracket that would clear T/A style covers, but I'm not sure how much of a dimensional difference there is between the two styles. I'm attaching another shot of our extended bar used in our coil-over set-up, which utilizes the same mounting point on the trailing arm. This angle may help visualize the clearance you are questioning. Sorry I cannot give you a definite answer on this one.

Thanks,
Attached Images
 
GEARBOXGARAGE is offline  
Old 12-22-2013, 11:58 AM   #19
Number98
Prestige Worldwide
 
Number98's Avatar
 
Join Date: Feb 2001
Location: Worldwide
Posts: 2,552
Re: HD Chromoly Panhard Bars

Thanks for the picture....

I actually have a T/A style cover and one of the PM L's, I will dig them both out and measure them out and let you know.

Jason
Number98 is offline  
Old 12-23-2013, 01:19 AM   #20
GEARBOXGARAGE
Registered User
 
Join Date: Sep 2011
Location: Sturgis, Michigan
Posts: 509
Re: HD Chromoly Panhard Bars

Quote:
Originally Posted by Number98 View Post
Thanks for the picture....

I actually have a T/A style cover and one of the PM L's, I will dig them both out and measure them out and let you know.

Jason
Jason,

Sounds great, I'm definitely interested in seeing how they compare.
GEARBOXGARAGE is offline  
Old 03-18-2016, 11:15 AM   #21
SIXTY9
Senior Member
 
Join Date: Jan 2013
Location: North Charleston SC
Posts: 504
Re: HD Chromoly Panhard Bars

Are you still selling the panhard bars? That is one very good looking truck yall built.
SIXTY9 is offline  
Old 03-18-2016, 11:56 AM   #22
GEARBOXGARAGE
Registered User
 
Join Date: Sep 2011
Location: Sturgis, Michigan
Posts: 509
Re: HD Chromoly Panhard Bars

Quote:
Originally Posted by SIXTY9 View Post
Are you still selling the panhard bars? That is one very good looking truck yall built.
Thanks for the compliment on our shop truck!

Yes we still have them, are you looking at the Series 1 (for 4" drop or less) or the Series 2 (for 5" drop or more)?
GEARBOXGARAGE is offline  
Old 03-18-2016, 12:46 PM   #23
SIXTY9
Senior Member
 
Join Date: Jan 2013
Location: North Charleston SC
Posts: 504
Re: HD Chromoly Panhard Bars

Series 1, I only took it down 1 1/2 inches. Going to pick it up from paint in Georgia in a few weeks. I will be in touch to order it soon. Thanks
SIXTY9 is offline  
Old 03-19-2016, 10:44 AM   #24
GEARBOXGARAGE
Registered User
 
Join Date: Sep 2011
Location: Sturgis, Michigan
Posts: 509
Re: HD Chromoly Panhard Bars

Quote:
Originally Posted by SIXTY9 View Post
Series 1, I only took it down 1 1/2 inches. Going to pick it up from paint in Georgia in a few weeks. I will be in touch to order it soon. Thanks
Sounds good.

Thanks!
GEARBOXGARAGE is offline  
Closed Thread

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 08:59 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com