fuel sending unit question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

garyt · 11-22-2012, 10:09 PM

i have a 51 chevy truck with the original gauges. i had the gauges rebuilt to a 12 volt setup. i am building an aluminum fuel cell but i am not sure exactly what type of sending unit to install in the fuel cell, anyone got an idea on what sending unit to use and also where to buy one thanks gary

Stepside Jim · 11-22-2012, 10:40 PM

garyt, recently I needed a sending unit to match the 30 ohm original gas guage. I found one at ClassicParts.com. It is a universal unit # 23-522A.

Hope this helps.

garyt · 11-23-2012, 04:36 PM

thanks jim, will give that a try

11-22-2012, 10:09 PM	#1
garyt Registered User Join Date: Feb 2012 Location: nederland texas Posts: 39	fuel sending unit question i have a 51 chevy truck with the original gauges. i had the gauges rebuilt to a 12 volt setup. i am building an aluminum fuel cell but i am not sure exactly what type of sending unit to install in the fuel cell, anyone got an idea on what sending unit to use and also where to buy one thanks gary

11-22-2012, 10:40 PM	#2
Stepside Jim Registered User Join Date: Aug 2012 Location: Salem Mo Posts: 656	Re: fuel sending unit question garyt, recently I needed a sending unit to match the 30 ohm original gas guage. I found one at ClassicParts.com. It is a universal unit # 23-522A. Hope this helps.

11-23-2012, 04:36 PM	#3
garyt Registered User Join Date: Feb 2012 Location: nederland texas Posts: 39	Re: fuel sending unit question thanks jim, will give that a try



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.