How about some pictures of hotroded sixes - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mknittle · 11-23-2012, 04:49 PM

Just thinking about somthing different.

paintman · 11-23-2012, 05:23 PM

Here this should keep ya busy!
http://www.jalopyjournal.com/forum/s...ad.php?t=18390
http://67-72chevytrucks.com/vboard/s...d.php?t=258488

NEWFISHER · 11-23-2012, 05:43 PM

Here's my 235 in the 55 wagon. Not a great shot, but it just had bolt on's and decent power. Body color valve cover, mini HEI and O.E. look HEI coil, split exhaust headers, heated manifold conversion, webber 2bbl conversion ( that I kept and have for sale) from Tom @ stoveboltengines.com .

No pic's yet of the Burb 250 but it's had a complete overhaul with some crank shaping,bigger cam, stainless seats, 202/194 valves, Z28 dual springs, ported, milled head, flat pistons, dual cast headers, clifford 6=8 heated manifold with a 390 Holley and HEI. Dyno shows 225 hp. Running 2 into 1 at 2.5 inch into a 3 chamber magnaflow and single out 2.5 Should be a fun runner. Here's a video of a similar recipe and same exhaust.

250 chevy inline 6 in 65 Chevelle wagon lump port...

Heres a good thread: http://www.jalopyjournal.com/forum/s...t=cylinder+250

MVI_1323.AVI - YouTube

and
http://www.youtube.com/watch?feature...&v=Dh7SYlrSjVs

18tahoe · 11-23-2012, 05:50 PM

55 pick-up and I think a 6 can be cool

paintman · 11-23-2012, 05:53 PM

Quote:

Originally Posted by 18tahoe

55 pick-up and I think a 6 can be cool

[IMG]http://i1227.photobucket.com/albums/ee424/jefftillman/DSC01725.jpg[/IMG

]

What kind of power steering pump is that?????????????????????

18tahoe · 11-23-2012, 06:16 PM

Its just a pump that you would use on a race car, a lot of companies make them, we did have to make a bracket for it.

mknittle · 11-25-2012, 10:59 AM

Quote:

Originally Posted by paintman

What kind of power steering pump is that?????????????????????

that is the look i am after!

verry nice!

mknittle · 11-23-2012, 06:46 PM

[QUOTE=18tahoe;5718606]55 pick-up and I think a 6 can be cool

I think you are right!

**Dieselwrencher** · 11-23-2012, 06:42 PM

Cough cough, with or without spark plugs?

NEWFISHER · 11-23-2012, 06:48 PM

Quote:

Originally Posted by Dieselwrencher

Cough cough, with or without spark plugs?

Post up that diesel swap!

mknittle · 11-23-2012, 07:02 PM

Quote:

Originally Posted by NEWFISHER

Post up that diesel swap!

You will have to narrowthat down with Ryan check out his build link on his signature and then there is his cummins 6Bt powered corvette drag car.

http://www.lowbudgetdiesel.com/Cumminscorvette.html

mknittle · 11-23-2012, 06:50 PM

Quote:

Originally Posted by Dieselwrencher

Cough cough, with or without spark plugs?

Yes I like those too

My dad is getting rolling on his peterbilt /dodge pickup. I will post a pic later of the mock up so far.

mknittle · 11-23-2012, 06:43 PM

Gotta love it!

**Dieselwrencher** · 11-23-2012, 09:20 PM

Is it ok to post them here? They aren't 47-59 trucks. You guys have a sweet 6cyl thread going and I don't want to clash it.

mknittle · 11-23-2012, 09:55 PM

pretty poor pics of a rough mock up.the cab is mounted. the front of the frame will get a bunch of fab work to adapt a 6" drop straight axle.there is a part of my ad frame inthe first pic

mknittle · 11-23-2012, 10:07 PM

I had some problems with the engine i was going to use in my gmc so I am thinking about a six for the fun of it.

Trekster · 11-24-2012, 02:04 AM

18tahoe, where did you get the double belt pulleys? Your engine looks great.

**Dieselwrencher** · 11-24-2012, 03:45 AM

Mknittle, the Pete looks awesome!

crossfire84 · 11-24-2012, 09:31 AM

very cool thread

18tahoe · 11-24-2012, 02:03 PM

Trekster we had the crank drilled and taped so we could use the pulleys, just after market set.

Divine 59 · 11-24-2012, 03:23 PM

Not sure if mine is a "hot rodded" six. But it will be warmed over. Just finished installing this today. Still have to put the oil filter cannister back on and the carb. But this provides a better view.

mknittle · 11-25-2012, 10:56 AM

Quote:

Originally Posted by Divine 59

Not sure if mine is a "hot rodded" six. But it will be warmed over. Just finished installing this today. Still have to put the oil filter cannister back on and the carb. But this provides a better view.

Looking good!

Divine 59 · 11-24-2012, 03:25 PM

18tahoe,

I really like your chrome side cover and valve cover. Is that the Wayne set?

ME. · 11-24-2012, 07:56 PM

Here's mine. Now it is around 400hp but that number will be going up.

Posted via Mobile Device
Posted via Mobile Device

mknittle · 11-25-2012, 10:53 AM

Quote:

Originally Posted by ME.

Here's mine. Now it is around 400hp but that number will be going up.

Posted via Mobile Device
Posted via Mobile Device

That is my favorite 6. I too have one but am not happy with the body that surrounds it

yours is much better!

11-23-2012, 04:49 PM	#1
mknittle Registered User Join Date: Jul 2011 Location: Auburn ca. Posts: 2,886	How about some pictures of hotroded sixes Just thinking about somthing different. __________________ Mark My GMC build. http://67-72chevytrucks.com/vboard/s...d.php?t=536602

11-23-2012, 05:23 PM	#2
paintman Registered User Join Date: Dec 2010 Location: washington NJ Posts: 766	Re: How about some pictures of hotroded sixes Here this should keep ya busy! http://www.jalopyjournal.com/forum/s...ad.php?t=18390 http://67-72chevytrucks.com/vboard/s...d.php?t=258488

11-23-2012, 05:50 PM	#4
18tahoe Registered User Join Date: Feb 2012 Location: lake tahoe ca Posts: 34	Re: How about some pictures of hotroded sixes 55 pick-up and I think a 6 can be cool

11-23-2012, 06:16 PM	#6
18tahoe Registered User Join Date: Feb 2012 Location: lake tahoe ca Posts: 34	Re: How about some pictures of hotroded sixes Its just a pump that you would use on a race car, a lot of companies make them, we did have to make a bracket for it.

11-23-2012, 06:46 PM	#8
mknittle Registered User Join Date: Jul 2011 Location: Auburn ca. Posts: 2,886	Re: How about some pictures of hotroded sixes [QUOTE=18tahoe;5718606]55 pick-up and I think a 6 can be cool I think you are right! __________________ Mark My GMC build. http://67-72chevytrucks.com/vboard/s...d.php?t=536602

11-23-2012, 06:42 PM	#9
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,142	Re: How about some pictures of hotroded sixes Cough cough, with or without spark plugs? __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

11-23-2012, 06:43 PM	#13
mknittle Registered User Join Date: Jul 2011 Location: Auburn ca. Posts: 2,886	Re: How about some pictures of hotroded sixes Gotta love it! __________________ Mark My GMC build. http://67-72chevytrucks.com/vboard/s...d.php?t=536602

11-23-2012, 09:20 PM	#14
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,142	Re: How about some pictures of hotroded sixes Is it ok to post them here? They aren't 47-59 trucks. You guys have a sweet 6cyl thread going and I don't want to clash it. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

11-23-2012, 09:55 PM	#15
mknittle Registered User Join Date: Jul 2011 Location: Auburn ca. Posts: 2,886	Re: How about some pictures of hotroded sixes pretty poor pics of a rough mock up.the cab is mounted. the front of the frame will get a bunch of fab work to adapt a 6" drop straight axle.there is a part of my ad frame inthe first pic Attached Images __________________ Mark My GMC build. http://67-72chevytrucks.com/vboard/s...d.php?t=536602 Last edited by mknittle; 11-23-2012 at 10:02 PM.

11-23-2012, 10:07 PM	#16
mknittle Registered User Join Date: Jul 2011 Location: Auburn ca. Posts: 2,886	Re: How about some pictures of hotroded sixes I had some problems with the engine i was going to use in my gmc so I am thinking about a six for the fun of it. __________________ Mark My GMC build. http://67-72chevytrucks.com/vboard/s...d.php?t=536602

11-24-2012, 02:04 AM	#17
Trekster Registered User Join Date: Feb 2012 Location: Brigham City Utah Posts: 157	Re: How about some pictures of hotroded sixes 18tahoe, where did you get the double belt pulleys? Your engine looks great.

11-24-2012, 03:45 AM	#18
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,142	Re: How about some pictures of hotroded sixes Mknittle, the Pete looks awesome! __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

11-24-2012, 09:31 AM	#19
crossfire84 Registered User Join Date: Jun 2012 Location: wind lake WI Posts: 1,751	Re: How about some pictures of hotroded sixes very cool thread __________________ LIL ERV the 50-3600 396 BBC stroked to 415 cid Richmond 6spd over drive C4 rear Porter built a arms Never give the Devil a ride,because he'll want to Drive!

11-24-2012, 02:03 PM	#20
18tahoe Registered User Join Date: Feb 2012 Location: lake tahoe ca Posts: 34	Re: How about some pictures of hotroded sixes Trekster we had the crank drilled and taped so we could use the pulleys, just after market set.

11-24-2012, 03:23 PM	#21
Divine 59 Registered User Join Date: Sep 2011 Location: Austin, TX Posts: 307	Re: How about some pictures of hotroded sixes Not sure if mine is a "hot rodded" six. But it will be warmed over. Just finished installing this today. Still have to put the oil filter cannister back on and the carb. But this provides a better view.



Register or Log In To remove these advertisements.

11-24-2012, 03:25 PM	#23
Divine 59 Registered User Join Date: Sep 2011 Location: Austin, TX Posts: 307	Re: How about some pictures of hotroded sixes 18tahoe, I really like your chrome side cover and valve cover. Is that the Wayne set?

11-24-2012, 07:56 PM	#24
ME. Registered User Join Date: Nov 2010 Location: lawrenceville georgia Posts: 51	Re: How about some pictures of hotroded sixes Here's mine. Now it is around 400hp but that number will be going up. Posted via Mobile Device Posted via Mobile Device

Register or Log In To remove these advertisements.