Need help with installing side rear panel windows New Gaskets

[67Mach1]

I'm about to install side windows in this baby. Anyone know the proceedure or how its supposed to be done or perhaps the best way to get it done?

Thanks,
Thomas

[vectorit]

I just used rope and soapy water, with a helper on the outside to help seat the glass.

[Street Smart]

Originally Posted by vectorit

I just used rope and soapy water, with a helper on the outside to help seat the glass.

I`ve seen it done that way, once you know how its easy, like a lot of things in life,lol.

[67Mach1]

Thanks for the help/info. I'll try it over Christmas holiday and let you know how it goes.

[blfuller123]

I tried putting mine in from the outside the other day and I didnt have any luck. Im going to try doing it from the inside next time. Please post if you figure it out.

[blfuller123]

I called the glass guys yesterday to put the back glass in and they had each one installed in about 20 minutes.

It took 2 people, a rope and a pair of suction cups. They took the window inside and started at the bottom. Once the bottom lip was started, they started pulling the rope from the outside while the guy on the inside was applying pressure. They made it look easy.

[67Mach1]

Originally Posted by blfuller123

I called the glass guys yesterday to put the back glass in and they had each one installed in about 20 minutes.

It took 2 people, a rope and a pair of suction cups. They took the window inside and started at the bottom. Once the bottom lip was started, they started pulling the rope from the outside while the guy on the inside was applying pressure. They made it look easy.

Thanks for the tip. My gaskets arrived today and install is scheduled on the 19th. I'll see about finding some suction cups, perhaps at Harbor Freight?

I'll have BADSAM from the site and his son there helping. I'm simply trying to "dry the sub in" to make it weather tight again. so I can pull it out from under the covered parking.

THanks again,
Thomas