tcc brake switch 85 c10

[robert_63]

anyone know about this switch? Can I just use my factory brake switch since the truck had cruise control? I purchased the switch for a camaro that i found a part number to on here, but the factory switch has 3 prongs on the end of it that i assume is for the cruise control, and the two other prongs that are for the brake lights, seems to me i can just use my switch and wire off the three prongs on the end.

[ls1nova71]

Yes your original switch will work since your truck originally had cruise. Just remove the cruise plug and hook the TCC through it. Then if you want to run cruise you can use the LS cruise.
Posted via Mobile Device

[izzy_Britton]

Originally Posted by ls1nova71

Yes your original switch will work since your truck originally had cruise. Just remove the cruise plug and hook the TCC through it. Then if you want to run cruise you can use the LS cruise.
Posted via Mobile Device

What is the LS cruise?

i am seeking a brake switch for my cruise control / TCC and this thread popped up on google. Napa doesnt have the switch that is a direct replacement for my switch and cannot cross reference one that will work.

your explanation would be greatly appreciated.

-Izzy

[BR3W CITY]

he means cruise control from the LS motor, not using anything off the old trucks.,

I would also get rid of the three prong switch in favor of a 4-prong switch. It makes wiring the cruise easy. Also, the cruise on the ls motors is DRASTICALLY different if you are running a drive-by-wire system....in that case the cruise control boils down to a couple of toggle switches.

[ls1nova71]

Not sure what yourw working on, but if its the 86 in your sig , just get one filor an 86 with cruise. Are you doing an LS engine swap?
Posted via Mobile Device

[mooseknuckles]

....