pics of how you ran fill hose on rear mounted tanks

[travz500]

Hey guys I have heard of lots of different fill hose ideas but have seen no pictures how did you all hook up your fill hose to your rear mounted tanks?
I am gonna buy the boyds tank and would like to see some pics of how you all hooked them up I am also trying to decide if I should get the top fill and just go thru the bed floor but my truck is 4x4 and has a 8" lift and will have
38" tires so will be tall and I think the fuel doors look funny on these beds

[travz500]

anyone??

[Goinlow64]

I dont have a picture, but I just wrapped my filler hose up this week. I have an LMC rear mount tank. The problem was the flush mount bed filler I had was 1.5" and the tank is 1 and 3/8" on the neck. SO I used a copper 1 1/4" to 1 1/2" reducer. The 1.25 end fit perfect in the neck on the tank. I also sweated in a 1.5" street 45 to get the neck pointed up instead of angled. I Right now I have the bed off, so I just have about 6" of fuel fill hose contacted to the filler and the neck. Hope that makes sense!

[travz500]

so is yours going up thru the bed or the bed side?
kinda lost me had to read it twice

[63burban4x4]

here's an idea, from a suburban

[travz500]

Originally Posted by 63burban4x4

here's an idea, from a suburban

good Idea but I just dont want a fuel door if i can avoid it I may even fab up somthing to fill from inside the bed sidewall If i dont go up thru the wood instead

[hop sing]

Originally Posted by travz500

good Idea but I just dont want a fuel door if i can avoid it I may even fab up somthing to fill from inside the bed sidewall If i dont go up thru the wood instead

STARTED THINKING THEN SAW A ADD FOR A 56 210 AND THOUGHT THROUGH TAIL LITE ,,?? JUST A THOUGHT ALOHA HOP SORRY FOR CAPS NO GLASSES TODAY

[JrJc66]

What about behind the rear license plate?

[McCoyAZ]

IF you put the filler neck in the wood bed and you spill gass all over the place it will become an issue.

Behind the license plate would work

or

If you want to do "a little" modification you could open up one of the rear stake pockets and run it inside and bring it out inside the bed up off the floor.

[travz500]

well ordered 2 drivers side fill tanks for 2 trucks and 2 aluminum 4 row radiators and electric fans from Pro Performance forum vendor here I am gonnna try to run in up by the tail light and put a fill hole there somewhere I wont have to look at from the side everytime I get in so it wont bother me as much thanks for the input guys

[raiderfan34]

Here's mine. New to posting pics so I hope it works. If not im gonna look like an idiot.
Posted via Mobile Device
Posted via Mobile Device

[raiderfan34]

Here's one more
Posted via Mobile Device
Posted via Mobile Device

[Clyde65]

Raiderfan, do you have a boyds tank? How did you put the fill from the bed to the tank?

[oldtrux]

Originally Posted by Clyde65

Raiderfan, do you have a boyds tank? How did you put the fill from the bed to the tank?

have you seen these khttp://www.classictrucks.com/tech/1002clt_1947_chevy_truck_bed_wood_tailgate_install/photo_22.htmlits
sorry,dont know what happened there,anyways its a hidden underbed hinge kit that lifts that board up=no nasty gas spills on your new beautiful wood floor

[kieth]

Originally Posted by travz500

Hey guys I have heard of lots of different fill hose ideas but have seen no pictures how did you all hook up your fill hose to your rear mounted tanks?
I am gonna buy the boyds tank and would like to see some pics of how you all hooked them up I am also trying to decide if I should get the top fill and just go thru the bed floor but my truck is 4x4 and has a 8" lift and will have
38" tires so will be tall and I think the fuel doors look funny on these beds

Here is how I did mine....in the bed Kieth

http://kieth.smugmug.com/Trucks/66-G...4975&k=sMtpxWj

[TxRat]

Not the most practical but it is a better set up than what I had. I will figure out a more permanent fix later.

[Chevy Fleetside]

I did this with mine when it was a step side. The cap is from a Ford Mustang of the 2000 yr models. It was a pain when I had stuff in the back and had to put gas in. .

[austin60c10]

Is your truck a fleet or stepside trav? I have a stepside and we ran it to the top of the fender and put a popup motorcycle cap on it idk if I have pics I'll look.

A

[travz500]

Originally Posted by austin60c10

Is your truck a fleet or stepside trav? I have a stepside and we ran it to the top of the fender and put a popup motorcycle cap on it idk if I have pics I'll look.

A

its gonna be a short fleet side

[TR65]

Here is how I did mine.

http://67-72chevytrucks.com/vboard/s...d.php?t=334077

TR

[travz500]

Originally Posted by TR65

Here is how I did mine.

http://67-72chevytrucks.com/vboard/s...d.php?t=334077

TR

I really like that did it come with all the black pieces or did you have to fab all the pipe from the filler? I like how its hidden and as tall as my truck will be no one will see it thank for the pics

[TR65]

Thanks travz,

I fabbed everything except the RCI snout and flange.

Been using it for a couple of years now. Hose clamp needed tightening once but that was it. No other trouble.

Good luck,

TR

[raiderfan34]

Got my tank through classic performance parts. It's a 20 gallon and came with everything needed. At first glance I thought the filler neck was going to hit a metal strip, then I just moved a couple boards around and it came out perfect.
Posted via Mobile Device