Baggin?

[71Longbed]

who sells the least expensive kit that isnt total crap?

[andrewmp6]

Depends a lot on do you want it lowered good or to lay frame.Or do you want manual valves or the electric ones?The cheapest kit i would use is http://www.azproperformance.com/Pro1...r-Bag-Kit.html that will get you pretty low if you want to lay frame the price goes up http://www.azproperformance.com/Pro3...-Ride-Kit.html

[71Longbed]

just want to go low not lay frame and i dont want to tub it or modify the wheel wells

[king-918]

Originally Posted by 71Longbed

who sells the least expensive kit that isnt total crap?

the real question is what do you consider to be cheap?
Posted via Mobile Device

[71Longbed]

im trying to keep the cost down so the lower the better
maybe a better question would be what do i need and what dont i need?
totally new the the whole air bagging idea

[Pro Performance]

Our Pro1 kit is a great kit and has everything you need to install onto your truck, minus drop spindles. The reason we don't include those, is a lot of guys are converting over from a static drop and already have the spindles.

The Pro1 will get you a low stance when parked, and allow for a ride height that is similar to a static drop. We can offer the Pro1 with a manual air management system, depending on your budget and preference. If going electric valves, this allows for the addition of e-level at a later time.

These trucks are running the Stage1 front and Stage2 rear from Porterbuilt, which are the same components that come in our Pro1 kit.

[Pro Performance]

The Pro1 kit, using the Stage2 Basic Porterbuilt rear kit will include the adjustable trac bar, c-notch & shock relocation which are all the right components to do bag the the truck correctly. You can go with a simpler setup, without a c-notch or adjustable trac bar, but will not get quite as low and the rear end will see more movement through the suspension cycle. The adjustable trac bar helps center up the rear end and allow for minimal movement due to it being longer (and positioned lower) than the original. It will extend from the frame side, to the opossite trailing arm.

- Travis

[Pro Performance]

Porterbuilt Stage 1



Porterbuilt Stage 2 Basic

[cubber]

^^^What he said. I basically have their kit, but I pieced some stuff together. Would have been just as good, if not better off, to buy the kit.

[andrewmp6]

Pro Performance is one of our site vendors and is the cheapest i found i trust to buy off of.