Cab tank installation help

[bonehead]

I am trying to install my new in-cab tank into my truck. This is a retrofit because the PO had installed a rear under bed tank. I am ready to bolt it all in but I think I may be missing a part.

I know the the strap needs to be formed to go over the top of the tank, but how does it hook onto the bracket on the back wall of the cab. The hook on the strap is going the wrong way to hook it on and if the hook was going the other way the strap would be too short. Is this a case that the supplier send me the wrong part or am I missing other part of the strap assembly.

Help?

[jayoldschool]

I can't help you, but I appreciate you posting this (with pics). My truck needs a new tank and I will be starting from scratch.

Who did you go with for the tank and sender? Price?

[WhippinSaw]

Unfortunately it looks like the PO removed most of the gas tank support welded to the floor.

[wayno]

I just removed my in cab tank to put my new tank from Boyd's under the rear - the straps don't have any sort of connector - they go down through the top against the back and fold back towards the sky on the front side - a little difficult to describe hopefully someone can post a picture - in this case a picture is worth a million dollars and it's pretty cut and dry.

[travz500]

Originally Posted by bonehead

I am trying to install my new in-cab tank into my truck. This is a retrofit because the PO had installed a rear under bed tank. I am ready to bolt it all in but I think I may be missing a part.

I know the the strap needs to be formed to go over the top of the tank, but how does it hook onto the bracket on the back wall of the cab. The hook on the strap is going the wrong way to hook it on and if the hook was going the other way the strap would be too short. Is this a case that the supplier send me the wrong part or am I missing other part of the strap assembly.

Help?

Take the strap with the hook facing forward and slide it down thru the bracket on the back of the cab it hooks there then it bends over the tank and has about a 1 1/2" long bolts to bolt to tank bracket but make sure you put some rubber under the tank on the bracket and over the top where the strap will lay. I also took my tank out of my truck and ordered Boyds welding tanks for both projects we are working on at the moment I dont have a picture of the straps installed its very easy once you see how they go

[travz500]

Originally Posted by bonehead

I am trying to install my new in-cab tank into my truck. This is a retrofit because the PO had installed a rear under bed tank. I am ready to bolt it all in but I think I may be missing a part.

I know the the strap needs to be formed to go over the top of the tank, but how does it hook onto the bracket on the back wall of the cab. The hook on the strap is going the wrong way to hook it on and if the hook was going the other way the strap would be too short. Is this a case that the supplier send me the wrong part or am I missing other part of the strap assembly.

Help?

the more I look at your picture I think your missing the part on the floor where it bolts thru take your tank out and take a picture for us you may be missing the pieces that should be on the floor of the cab

[structures]

from the first picture it looks like the fwd flange has been bent down. Maybe to get it out of the way since the PO relocated the tank.

[luvbowties]

I know the the strap needs to be formed to go over the top of the tank, but how does it hook onto the bracket on the back wall of the cab. The hook on the strap is going the wrong way to hook it on and if the hook was going the other way the strap would be too short. Is this a case that the supplier send me the wrong part or am I missing other part of the strap assembly.

Looks like u got right straps--see pic of ones from Rock Auto below.

The back fastens by folding its very end back onto itself, then slides down thru rear hook, with the end toward front, of course; the crease holds it tight when you pull it back up against the hook.

If u need to lengthen overall, for whatever reason, buy a threaded rod from Lowes & cut it off to proper length. Also buy a "coupling nut" from them along with a 1.5--2.5 inch bolt--they might not be familiar with that "c/n" term, so see the pic of one below. In effect, this raises front floor attaching point to a height where strap will now bolt to (onto top end of coupling nut).
HTH,
Sam

[bonehead]

Thanks for all the input, I think I understand the assembly now.

In post #3 Whippinsaw posted pictures of his tank, but that must be an earlier truck with different mounting straps. Looks like his truck is a 60-63. His does not have the hook style straps like on my 66'

I will attach pics of my finished assembly for reference.

[jayoldschool]

Can you let us know where the tank and sender came from and the price? I need to order one asap.

Thanks!
Jason.

[bonehead]

I got the tank and sender at a local car show at the Metrolina from a local truck parts vendor named Tommy's Pickup parts, he is out of Shelby, NC 704-482-0478.

I think I paid about $180 for the tank and about $25 for the sender, but I saved by not having to pay shipping on the huge tank. Oh, and the sender was complete with the float and filter sock. Some places sell that stuff separate to make more $$$.

Hope that helps.

[Lugnutz65]

OK, I think I remember the setup. I thought I had a picture of the area with the tank out and the straps in, but nope. So I'm going from memory here.

There is a bracket that is welded to the back wall of the cab. The "hooked" end of the strap slips down though until the end that's folded back over onto itself is past the bracket. Then pull the strap up with the hook catching the bracket per the drawing I rendered on my photo. Then bolt the other end to the bracket that's closest to the floor.

I hope this makes sense. Unfortunately, I think the pictures WhippinSaw posted are not the same as the 64-66 straps.

[travz500]

Originally Posted by Lugnutz65

OK, I think I remember the setup. I thought I had a picture of the area with the tank out and the straps in, but nope. So I'm going from memory here.

There is a bracket that is welded to the back wall of the cab. The "hooked" end of the strap slips down though until the end that's folded back over onto itself is past the bracket. Then pull the strap up with the hook catching the bracket per the drawing I rendered on my photo. Then bolt the other end to the bracket that's closest to the floor.

I hope this makes sense. Unfortunately, I think the pictures WhippinSaw posted are not the same as the 64-66 straps.

yes that is how they go I couldnt find a pic of mine with the tank out and the straps still there

[joe750]

bonehead,
what side of Charlotte are you from?
We've got a motorcycle shop in NoDa so I'm always around.
We've got somewhat of a "pack" of c10s. Always looking for more people to cruise with
Posted via Mobile Device

[bonehead]

Originally Posted by joe750

bonehead,
what side of Charlotte are you from?
We've got a motorcycle shop in NoDa so I'm always around.
We've got somewhat of a "pack" of c10s. Always looking for more people to cruise with
Posted via Mobile Device

I live on the east side in Mint Hill, I'm always looking for a good cruise spot or meetup. Let me know where you guys will be next and I'll bring my truck out.

[TehNewGuy]

Lugnutz65,that is prolly one of the best use of windows paint that I have ever seen! Great picture man.

[bonehead]

Originally Posted by Lugnutz65

OK, I think I remember the setup. I thought I had a picture of the area with the tank out and the straps in, but nope. So I'm going from memory here.

There is a bracket that is welded to the back wall of the cab. The "hooked" end of the strap slips down though until the end that's folded back over onto itself is past the bracket. Then pull the strap up with the hook catching the bracket per the drawing I rendered on my photo. Then bolt the other end to the bracket that's closest to the floor.

I hope this makes sense. Unfortunately, I think the pictures WhippinSaw posted are not the same as the 64-66 straps.

That is exactly what I needed to see. Great input and pictures, Lugnutz65. The help on this forum is the best. I will try to finish my re-install this weekend. I will update with pics then. Many thankx

[Lugnutz65]

Very nice work. I was in the yard working on my truck today too. I wonder if anyone ever used rubber bicycle inner tubes to cushion the strap. Certainly not "factory" though. Haha!