1965 K-10 4x4 lift kit? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

4mosaic · 03-06-2013, 10:22 PM

I have a 65 K-10 navy issue Stepside 4x4 that I need to lift about 4inches. Since the lift isn't made aftermarket I'm trying to see what others are doing here. This particular truck has a factory block lift already in the rear but want an all spring lift rather than any blocks. I could have springs made but want any suggestions from those who have done the lift and what obsticales they faced.
Posted via Mobile Device

travz500 · 03-06-2013, 10:29 PM

Quote:

Originally Posted by 4mosaic

I have a 65 K-10 navy issue Stepside 4x4 that I need to lift about 4inches. Since the lift isn't made aftermarket I'm trying to see what others are doing here. This particular truck has a factory block lift already in the rear but want an all spring lift rather than any blocks. I could have springs made but want any suggestions from those who have done the lift and what obsticales they faced.
Posted via Mobile Device

Well custom made is the only thing really on mine I put the suspension from a 87 8" lift it was a lot of work on the front rear was easy here are a couple of pics if you look at NY build thread there are more
Posted via Mobile Device
Posted via Mobile Device

**Captainfab** · 03-07-2013, 02:29 AM

I'm afraid you will likely have to do what travz500 and jonzcustomshop have done. That is convert the truck to the '73-'87 suspension, which have lift springs available. Something similar that can be done is to use the 52" spring conversion brackets on the front and a shackle flip on the rear, with about 4" springs, and you should be close to 8" of lift.

http://www.diy4x.com

62 short step · 03-07-2013, 08:59 AM

This is what I did to my 61.

http://67-72chevytrucks.com/vboard/s...d.php?t=333036

03-06-2013, 10:22 PM	#1
4mosaic Registered User Join Date: Oct 2012 Location: Gainesville, va Posts: 6	1965 K-10 4x4 lift kit? I have a 65 K-10 navy issue Stepside 4x4 that I need to lift about 4inches. Since the lift isn't made aftermarket I'm trying to see what others are doing here. This particular truck has a factory block lift already in the rear but want an all spring lift rather than any blocks. I could have springs made but want any suggestions from those who have done the lift and what obsticales they faced. Posted via Mobile Device

03-07-2013, 02:29 AM	#3
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,252	Re: 1965 K-10 4x4 lift kit? I'm afraid you will likely have to do what travz500 and jonzcustomshop have done. That is convert the truck to the '73-'87 suspension, which have lift springs available. Something similar that can be done is to use the 52" spring conversion brackets on the front and a shackle flip on the rear, with about 4" springs, and you should be close to 8" of lift. http://www.diy4x.com __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

03-07-2013, 08:59 AM	#4
62 short step Senior Member Join Date: Aug 2005 Location: Greenwell Springs, Louisiana Posts: 2,882	Re: 1965 K-10 4x4 lift kit? This is what I did to my 61. http://67-72chevytrucks.com/vboard/s...d.php?t=333036 __________________ www.louisianaclassictruckclub.com 1965 c-10 86 chevy c/k 20



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.