Some help indentifying dropped spindles - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Novalicious · 03-06-2013, 10:55 PM

No name or part # just c10 lh and rh

LVPhotos · 03-06-2013, 11:34 PM

If that is a bell to the lower left of lh or RH it's Belltech.
Posted via Mobile Device

**lolife99** · 03-07-2013, 07:04 AM

Quote:

Originally Posted by LVPhotos

If that is a bell to the lower left of lh or RH it's Belltech.
Posted via Mobile Device

Not true.
Belltech has the word "Belltech" and the part number cast into each spindle.
Posted via Mobile Device

LVPhotos · 03-07-2013, 11:19 AM

[QUOTE=lolife99;5932408]Not true.
Belltech has the word "Belltech" and the part number cast into each spindle.
Posted via Mobile Device[/QUOTE

Bought my Belltechs and that bell was the only marking. They were bought years ago but the rust on those would say same time frame.
Posted via Mobile Device

eldogg · 03-07-2013, 01:51 AM

Looks like DJM or Chassis tech to me.
Posted via Mobile Device

**lolife99** · 03-07-2013, 07:05 AM

You'll have to check upper balljoint or outer tie rod fit to know for sure what year spindles these are.
Posted via Mobile Device

Novalicious · 03-07-2013, 09:11 AM

kind of figured.....Ball joint position is 12/6

Tx Firefighter · 03-07-2013, 10:05 AM

What Keith means is that you're going to need to go to the parts store with the spindle and test fit ball joints and tie rid ends to find the ones that fit the tapered ball joint and tie rod holes. It could be 63-70, 71-72, or 73-87 fitment. All will work on your truck if you swap parts accordingly.
Posted via Mobile Device

Novalicious · 03-07-2013, 10:25 AM

I know.....thanks. Thought I remembered the older spindles were laid back a little on the caliper location moving the ball joint orientation from 12/6 oclock to 11/5 which is why I included that. Don't remember if that is correct or not.

Novalicious · 03-07-2013, 01:52 PM

He is correct

Tx Firefighter · 03-07-2013, 04:34 PM

That means they came from the Bell foundry. They cast spindles for different companies as well as Belltech stuff. They also cast the Super Bell axles for hot rods too.

Its the same thing as Western casting spindles for CPP, Early Classic, as well as themselves.
Posted via Mobile Device

Novalicious · 03-07-2013, 04:43 PM

Very cool learn something new every day. heading to parts store now....see what I can find out.

Novalicious · 03-07-2013, 06:32 PM

73-87....Don't know the brand, but knowing they came out of Bell foundry I am more comfortable....

**lolife99** · 03-07-2013, 08:26 PM

There are two 73-87 spindles.
Light duty 1" rotor version and the HD 1-1/4" rotor version.
Posted via Mobile Device

03-06-2013, 10:55 PM	#1
Novalicious Registered User Join Date: Dec 2012 Location: Long Island, NEW YORK Posts: 95	Some help indentifying dropped spindles No name or part # just c10 lh and rh

03-06-2013, 11:34 PM	#2
LVPhotos Registered User Join Date: Jan 2013 Location: Las Vegas, NV Posts: 1,857	Re: Some help indentifying dropped spindles If that is a bell to the lower left of lh or RH it's Belltech. Posted via Mobile Device __________________ 1962 shortbed 408cui small block, TKO 600 5-speed, bagged Porterbuilt suspension. 18" Salt Flats http://www.cardomain.com/ride/332579...t-c-k-pick-up/ http://67-72chevytrucks.com/vboard/s...d.php?t=560081

03-07-2013, 11:19 AM	#4
LVPhotos Registered User Join Date: Jan 2013 Location: Las Vegas, NV Posts: 1,857	Re: Some help indentifying dropped spindles [QUOTE=lolife99;5932408]Not true. Belltech has the word "Belltech" and the part number cast into each spindle. Posted via Mobile Device[/QUOTE Bought my Belltechs and that bell was the only marking. They were bought years ago but the rust on those would say same time frame. Posted via Mobile Device __________________ 1962 shortbed 408cui small block, TKO 600 5-speed, bagged Porterbuilt suspension. 18" Salt Flats http://www.cardomain.com/ride/332579...t-c-k-pick-up/ http://67-72chevytrucks.com/vboard/s...d.php?t=560081

03-07-2013, 01:51 AM	#5
eldogg Registered User Join Date: May 2007 Location: Mooresville NC/Gainesville GA Posts: 499	Re: Some help indentifying dropped spindles Looks like DJM or Chassis tech to me. Posted via Mobile Device __________________ Eric Evans Queen City Shop Truck http://67-72chevytrucks.com/vboard/s...34#post6139834 66 GMC http://67-72chevytrucks.com/vboard/s...d.php?t=543110

03-07-2013, 07:05 AM	#6
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,700	Re: Some help indentifying dropped spindles You'll have to check upper balljoint or outer tie rod fit to know for sure what year spindles these are. Posted via Mobile Device __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

03-07-2013, 09:11 AM	#7
Novalicious Registered User Join Date: Dec 2012 Location: Long Island, NEW YORK Posts: 95	Re: Some help indentifying dropped spindles kind of figured.....Ball joint position is 12/6

03-07-2013, 10:05 AM	#8
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Re: Some help indentifying dropped spindles What Keith means is that you're going to need to go to the parts store with the spindle and test fit ball joints and tie rid ends to find the ones that fit the tapered ball joint and tie rod holes. It could be 63-70, 71-72, or 73-87 fitment. All will work on your truck if you swap parts accordingly. Posted via Mobile Device

03-07-2013, 10:25 AM	#9
Novalicious Registered User Join Date: Dec 2012 Location: Long Island, NEW YORK Posts: 95	Re: Some help indentifying dropped spindles I know.....thanks. Thought I remembered the older spindles were laid back a little on the caliper location moving the ball joint orientation from 12/6 oclock to 11/5 which is why I included that. Don't remember if that is correct or not.

03-07-2013, 01:52 PM	#10
Novalicious Registered User Join Date: Dec 2012 Location: Long Island, NEW YORK Posts: 95	Re: Some help indentifying dropped spindles He is correct

03-07-2013, 04:34 PM	#11
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Re: Some help indentifying dropped spindles That means they came from the Bell foundry. They cast spindles for different companies as well as Belltech stuff. They also cast the Super Bell axles for hot rods too. Its the same thing as Western casting spindles for CPP, Early Classic, as well as themselves. Posted via Mobile Device

03-07-2013, 04:43 PM	#12
Novalicious Registered User Join Date: Dec 2012 Location: Long Island, NEW YORK Posts: 95	Re: Some help indentifying dropped spindles Very cool learn something new every day. heading to parts store now....see what I can find out.

03-07-2013, 06:32 PM	#13
Novalicious Registered User Join Date: Dec 2012 Location: Long Island, NEW YORK Posts: 95	Re: Some help indentifying dropped spindles 73-87....Don't know the brand, but knowing they came out of Bell foundry I am more comfortable....

03-07-2013, 08:26 PM	#14
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,700	Re: Some help indentifying dropped spindles There are two 73-87 spindles. Light duty 1" rotor version and the HD 1-1/4" rotor version. Posted via Mobile Device __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.