|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
03-15-2013, 09:54 AM
|
#1 |
|
Registered User
 
Join Date: Jul 2009
Location: Perley,MN,US
Posts: 151
|
1963 hafl ton 4x4 shocks
Dose anyone have a part number for the front and rear shocks for a 63 half ton 4x4? i looked up some threads and found a couple rancho numbers, rs5008 for the front and rs5116 for the rear but the were talking about a 3/4 ton. would those work on my half ton? thanks!
|
|
|
|
03-15-2013, 10:26 AM
|
#2 |
|
Registered User
Join Date: Jun 2006
Location: MO.
Posts: 970
|
Re: 1963 hafl ton 4x4 shocks
they will work, do you have shocks on it now if you do meausure them collapsed and extended then go to your flaps and give them the meaurements and they should find a shock for you
|
|
|
|
|
03-15-2013, 04:03 PM
|
#3 |
|
Registered User
Join Date: Sep 2008
Location: San Carlos, Ca.
Posts: 3,048
|
Re: 1963 hafl ton 4x4 shocks
I run the 9000's on mine. If you want I can get pn's when I get home so you could cross reference them?
Posted via Mobile Device
__________________
Chris '63 k15 long step Vortec 7.4 - L29 Blackbear tune, Five 0 Motorsports injectors, Chris Straub Cam, NV4500, divorced 205  52" front and 63" rear spring swap D44 / 14bff - disc axles Milemarker 9K and 10.5K hydraulic winches 63" & B52 Spring Install http://67-72chevytrucks.com/vboard/s...ng+swap+thread NV4500 Reverse Build Thread http://67-72chevytrucks.com/vboard/s...=reverse+build L29 - 7.4 Vortec Build http://67-72chevytrucks.com/vboard/s...&highlight=L29 |
|
|
|
|
03-15-2013, 05:30 PM
|
#4 |
|
Registered User
Join Date: Jul 2009
Location: Perley,MN,US
Posts: 151
|
Re: 1963 hafl ton 4x4 shocks
Thanks guys!
|
|
|
|
|
03-15-2013, 07:02 PM
|
#5 |
|
Check The Champ, Demonstrator
Join Date: Jun 2009
Location: Montreal,Quebec
Posts: 6,627
|
Re: 1963 hafl ton 4x4 shocks
When you want to option a Heavy Duty shock absorber on a C10 you can use a shock from a C20. According to the parts book, the same shock absorber, group 7.345, is used on a K10 or K20 from 63-66 GM part #3197643 for the front and part#22012166 for the rear. The rear part number is a newer number that supersedes the original.
__________________
1963 Chevrolet Truck Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original Chevrolet Truck Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1 Last edited by aerotruk63; 03-15-2013 at 07:27 PM. |
|
|
|
|
03-15-2013, 08:41 PM
|
#6 |
|
Senior Member
Join Date: Aug 2008
Location: Long Beach, CA
Posts: 1,813
|
Re: 1963 hafl ton 4x4 shocks
I can help you spec out a Bilstein if you can measure the resting length of the damper.
__________________
Jason M. @argonaut62 1972 K5 Blazer CST, Turquoise 1966 K20 Short Fleet Pickup, Big Ugly 1964 C10 Short Fleet, Gertrude 2001 Porsche 911 Carrera 1996 Ford Bronco XLT 1980 Jeep Wagoneer 2008 Honda CBR1000RR 2005 Honda RC51 1981 Honda CB750C No dis-assemble Johnny Five! No dis-assemble! |
|
|
|
|
| Bookmarks |
|
|
Hybrid Mode
