The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > Welcome and Discussion > Welcome Area

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 03-16-2013, 10:38 PM   #1
noackrite
Registered User
 
Join Date: Mar 2013
Location: crestview florida
Posts: 0
nw florida here (67 gmc)

hi , we all know that guy that has that car or truck in their yard that they are going to do something with one day. i work with one of those guys. this guy is a old racer , he drove straight axle gassers as daily drivers back in the 70's. he built dirt track cars in the 80's also.he bought his 67 gmc in 1977 and used it until 1998 and parked it in his yard. he tells me that hundreds of people have asked about that truck.i told him that he has turned into one of those guys that have a vehicle that is just sinking into the ground and nothing will never get around to fixing it . so i threw it out there.... you should let me have that truck..he says to me .... ya know, i think i might let you have that old truck.he says he has taken a liking to me because i just finished building a 65 falcon and i want to build a dtraight axle gasser out of a 64 comet that i have . i just got home from his house . i looked the tuck over and seen how bad it really is.it is pretty bad. it has sunken about 6 inches into the ground.the bed is filled with old tools extention cords and just a bunch of junk. we moved some stuff around and about 2 feet from the cab back the floor of the bed just hit the ground. it has some nice turbo mufflers from the early 80's on it which you can see through the bed floor .i dont think he ever cleaned out the inside . rats nest everywhere.he says he has some extra parts in the back yard... a whole othe 67 bed . two doors off of a 72 dash board transmission and various other things for the truck also. then he tells me to check out this rear end. a 56 olds axle that has been narrowed along with a econoline straight front axle.he says i can have them to put on my gasser build.i will try to get her home sometime this week and start cleaning her up.
Attached Images
     
noackrite is offline   Reply With Quote
Old 03-19-2013, 01:37 PM   #2
1ATony
Registered User
 
Join Date: Oct 2009
Location: Pepperell,Mass
Posts: 724
Re: nw florida here (67 gmc)

welcome to the site
1ATony is offline   Reply With Quote
Old 03-19-2013, 02:08 PM   #3
noackrite
Registered User
 
Join Date: Mar 2013
Location: crestview florida
Posts: 0
Re: nw florida here (67 gmc)

thanks tony , i just got the truck home and finally got a good look at it . it is rough but i can get it back on the road. i see that you a vendor . do you match prices from other vendor on the internet ?

Randy
noackrite is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 08:44 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com