|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
03-17-2013, 09:08 PM
|
#1 |
|
Registered User
Join Date: Nov 2012
Location: Connecticut
Posts: 99
|
Sachs1050 flywheel and high HP clutch combo
I have a sachs 1050 flywheel for my turbo'd LQ4. Im using this because of its thickness to work with my Muncie. Im looking for a clutch to match this flywheel that will handle about 800+Hp. Im running an auto gear M22 tranny with 1-1/8" 26 spline input shaft manual clutch linkage.
Just for fun I tried my lining up my old SBC clutch to this flywheel, it looks like the bolt pattern is the same, but the pressure plate did not line up correctly. What are my high horsepower clutch options for this flywheel? I prefer a twin disk for a lighter pedal. I plan to run slicks at the track. 
__________________
71' Chevy C10-Turbo 6.0L-80e-JFR218-738hp/700tq-10.1@133mph... 1.54 60' (3737lbs) 00' GMC-c2500-Turbo 6.0L-80e-JFR212-500hp/560tq -11.67@116mph (5182lbs) |
|
|
|
03-17-2013, 10:33 PM
|
#2 |
|
Registered User
Join Date: Apr 2012
Location: Vegas
Posts: 617
|
Re: Sachs1050 flywheel and high HP clutch combo
I used the same flywheel with my SBC clutch, just remove the alignment pins.
|
|
|
|
|
03-18-2013, 05:21 PM
|
#3 |
|
Registered User
Join Date: Nov 2012
Location: Connecticut
Posts: 99
|
Re: Sachs1050 flywheel and high HP clutch combo
Did the ID of the pressure plate seat on the flywheel?
Posted via Mobile Device
__________________
71' Chevy C10-Turbo 6.0L-80e-JFR218-738hp/700tq-10.1@133mph... 1.54 60' (3737lbs) 00' GMC-c2500-Turbo 6.0L-80e-JFR212-500hp/560tq -11.67@116mph (5182lbs) |
|
|
|
|
03-19-2013, 08:16 AM
|
#4 | |
|
Registered User
Join Date: Apr 2012
Location: Vegas
Posts: 617
|
Re: Sachs1050 flywheel and high HP clutch combo
Quote:
|
|
|
|
|
|
03-18-2013, 11:54 PM
|
#5 |
|
Registered User
Join Date: Sep 2012
Location: Milwaukie OR
Posts: 135
|
Re: Sachs1050 flywheel and high HP clutch combo
I ran that as well, used my centerforce dual friction on it. You'll have to get metric flywheel bolts, and drill out 3 the holes a little larger on the pressure plate.
|
|
|
|
|
03-19-2013, 09:59 AM
|
#6 |
|
Registered User
 
Join Date: Feb 2009
Location: Scottsdale, AZ
Posts: 390
|
Re: Sachs1050 flywheel and high HP clutch combo
I also have that Sachs FW based on whitels1's recipe, but I'm a bit confused as to which clutch to order. My thought was a Centerforce DF024909 which Summit states as a 12". But there are also 11" listed. Why?
__________________
-Don- '66  C10 w/factory A/C'77 Cheyenne K5 350/465/205 '80 Custom Deluxe K20 350/465/205'04 Denali XL '05 DMax CCLB 4x Have a Hickey Sidewinder Winch and need the owners/install manual? Send me a PM with your email address and I'll forward you a .pdf 
|
|
|
|
|
03-19-2013, 05:51 PM
|
#7 | |
|
Fabricate till you "puke"
Join Date: Jun 2002
Location: Ill
Posts: 9,402
|
Re: Sachs1050 flywheel and high HP clutch combo
Quote:
 crazyL
__________________
69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears.... |
|
|
|
|
|
03-19-2013, 09:22 PM
|
#8 |
|
Registered User
Join Date: Nov 2012
Location: Connecticut
Posts: 99
|
Re: Sachs1050 flywheel and high HP clutch combo
Yes thanks I agree about my feet and legs as well. I ordered the McLeod rxt clutch and flywheel. I feel good about about the whole combo now.
Posted via Mobile Device
__________________
71' Chevy C10-Turbo 6.0L-80e-JFR218-738hp/700tq-10.1@133mph... 1.54 60' (3737lbs) 00' GMC-c2500-Turbo 6.0L-80e-JFR212-500hp/560tq -11.67@116mph (5182lbs) |
|
|
|
|
| Bookmarks |
| Tags |
| high horsepower clutch, sachs1050 clutch, twin disk |
|
|
Hybrid Mode
