MO Wtb high hump cover bolts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**WETOWM** · 03-20-2013, 09:27 PM

I know this sounds crazy but i miss placed 4 of my bolts for the cover i know i could go to the hardware store and get somes bolts but i like to use original stuff

teeitup · 03-20-2013, 10:15 PM

Rich, I'm sure I have some out there, I'm just not sure when I will be able to get out there and look. I've been working on my shop every night. I will try to look tomorrow night if it snows tomorrow

**Cash3481** · 03-20-2013, 10:40 PM

Randy, I have some for Rich!
Rich send me your address in a pm and ill send you these in the pic.
I need Randy focused on that garage so he can give me some good deals! Lol
Mike
Posted via Mobile Device

**WETOWM** · 03-20-2013, 10:40 PM

Ok thanks

teeitup · 03-21-2013, 08:36 AM

Thanks Mike, it would of took me awhile just to get into my storage shed to look for them, I got all materials and tools in there for the garage. Your a good guy and so is Rich!!

**Cash3481** · 03-21-2013, 10:41 AM

Randy,
I wasnt trying to step on your sell...LOL I figured youd hook him up anyway!
They will go out at lunch today.
Mike

teeitup · 03-21-2013, 12:31 PM

Oh no worries I was going to send them to him too

**70STOVEBOLT** · 03-21-2013, 10:02 PM

Hey guys, what type of "nut" do these bolts thread into? I will be needing some hardware also in the future.

Thanks,
Mark

**Cash3481** · 03-21-2013, 10:23 PM

Quote:

Originally Posted by 70STOVEBOLT

Hey guys, what type of "nut" do these bolts thread into? I will be needing some hardware also in the future.

Thanks,
Mark

I'll post a picture of the high hump floor surround I have cut out tomorrow AM. Then I can measure it's size and get a bolt dimension then too.
Mike
Posted via Mobile Device

JimKshortstep4x4 · 03-22-2013, 05:34 AM

70STOVEBOLT,

FYI, here is a picture of an original floor from underneath. The nuts are square and they are welded to reenforcement strips which are welded to the floor.

The thread size is 5/16-18.

Jim

**Hart_Rod** · 03-22-2013, 10:31 AM

Not to thread hijack, but I'm parting a big block truck and have the reinforcement plate I could cut out if anyone is interested.
Posted via Mobile Device

**70STOVEBOLT** · 03-24-2013, 09:55 AM

Quote:

Originally Posted by Hart_Rod

Not to thread hijack, but I'm parting a big block truck and have the reinforcement plate I could cut out if anyone is interested.
Posted via Mobile Device

Rob, I'll pass.

**70STOVEBOLT** · 03-22-2013, 11:28 AM

Rob, you mean the plate with the nuts welded to it? My 72 high hump cab does not have anything welded to the bottom of it. If you have the plate with the nuts I am interested. Also the bolts. I already have a hump. For my cab...

Thanks,
Mark

cheyenne10 · 03-23-2013, 11:57 PM

Just got in from setting to mask and cut out low hump and exploring how we will bolt high hump in. Hartrob, I would be interested in reinforcing strip(s) and nuts if it comes to me.

Days getting longer and slowly back to my sons project again.

03-20-2013, 09:27 PM	#1
WETOWM Senior Member Join Date: Jun 2011 Location: ST LOUIS MO Posts: 2,119	Wtb high hump cover bolts I know this sounds crazy but i miss placed 4 of my bolts for the cover i know i could go to the hardware store and get somes bolts but i like to use original stuff

03-20-2013, 10:15 PM	#2
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Wtb high hump cover bolts Rich, I'm sure I have some out there, I'm just not sure when I will be able to get out there and look. I've been working on my shop every night. I will try to look tomorrow night if it snows tomorrow __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-20-2013, 10:40 PM	#3
Cash3481 Loves all GMC trucks Join Date: Jul 2010 Location: Columbia Mo Posts: 4,435	Re: Wtb high hump cover bolts Randy, I have some for Rich! Rich send me your address in a pm and ill send you these in the pic. I need Randy focused on that garage so he can give me some good deals! Lol Mike Posted via Mobile Device Attached Images

03-20-2013, 10:40 PM	#4
WETOWM Senior Member Join Date: Jun 2011 Location: ST LOUIS MO Posts: 2,119	Re: Wtb high hump cover bolts Ok thanks

03-21-2013, 08:36 AM	#5
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Wtb high hump cover bolts Thanks Mike, it would of took me awhile just to get into my storage shed to look for them, I got all materials and tools in there for the garage. Your a good guy and so is Rich!! __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-21-2013, 10:41 AM	#6
Cash3481 Loves all GMC trucks Join Date: Jul 2010 Location: Columbia Mo Posts: 4,435	Re: Wtb high hump cover bolts Randy, I wasnt trying to step on your sell...LOL I figured youd hook him up anyway! They will go out at lunch today. Mike

03-21-2013, 12:31 PM	#7
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Wtb high hump cover bolts Oh no worries I was going to send them to him too __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-21-2013, 10:02 PM	#8
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,450	Re: Wtb high hump cover bolts Hey guys, what type of "nut" do these bolts thread into? I will be needing some hardware also in the future. Thanks, Mark __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

03-22-2013, 05:34 AM	#10
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	Re: Wtb high hump cover bolts 70STOVEBOLT, FYI, here is a picture of an original floor from underneath. The nuts are square and they are welded to reenforcement strips which are welded to the floor. The thread size is 5/16-18. Jim Attached Images __________________ 1971 Shortbox step side 4x4, 350 sbc, 3:07 rear end 1965 Impala SS 400 sbc, Muncie rock crusher 1966 Impala SS 396 bbc, TH 400 1969 El Camino, 350 sbc, TH 350 1971 Snowplow built on a Blazer frame 1972 GMC Short bed, stepside, TH 400, 427 BBC

03-22-2013, 10:31 AM	#11
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,862	Re: Wtb high hump cover bolts Not to thread hijack, but I'm parting a big block truck and have the reinforcement plate I could cut out if anyone is interested. Posted via Mobile Device __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

03-22-2013, 11:28 AM	#13
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,450	Re: Wtb high hump cover bolts Rob, you mean the plate with the nuts welded to it? My 72 high hump cab does not have anything welded to the bottom of it. If you have the plate with the nuts I am interested. Also the bolts. I already have a hump. For my cab... Thanks, Mark __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

03-23-2013, 11:57 PM	#14
cheyenne10 Senior Member Join Date: Apr 2000 Location: Oregon Posts: 2,512	Re: Wtb high hump cover bolts Just got in from setting to mask and cut out low hump and exploring how we will bolt high hump in. Hartrob, I would be interested in reinforcing strip(s) and nuts if it comes to me. Days getting longer and slowly back to my sons project again. __________________ Bob



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.