somebody school me, rear sway bar (factory) - The 1947 - Present Chevrolet & GMC Truck Message Board Network

fergi62 · 03-20-2013, 11:59 PM

was at a yard early last winter and purchased a rear swaybar from a 75 dually to install on my k-10 p/u. finally got the longer u bolts and tried to install it but the bar itself was actually too narrow to fit the k-10, my question is are the dually's spring seats welded on at a narrower distance than a single rear wheel? i was under the assumption that the rear was the same other than the outside wheel. which i thought was actually taken up by the rear fenders? thanks in advance

AntiGov · 03-21-2013, 12:25 AM

not sure about 1/2 tons but 1 tons are narrower than 3/4 tons, both drw and srw....talking strictly about the perch mounts themselves

03-20-2013, 11:59 PM	#1
fergi62 Registered User Join Date: Mar 2013 Location: marked tree arkansas Posts: 99	somebody school me, rear sway bar (factory) was at a yard early last winter and purchased a rear swaybar from a 75 dually to install on my k-10 p/u. finally got the longer u bolts and tried to install it but the bar itself was actually too narrow to fit the k-10, my question is are the dually's spring seats welded on at a narrower distance than a single rear wheel? i was under the assumption that the rear was the same other than the outside wheel. which i thought was actually taken up by the rear fenders? thanks in advance

03-21-2013, 12:25 AM	#2
AntiGov Registered User Join Date: Oct 2011 Location: central Oregon Posts: 1,225	Re: somebody school me, rear sway bar (factory) not sure about 1/2 tons but 1 tons are narrower than 3/4 tons, both drw and srw....talking strictly about the perch mounts themselves __________________ 88 3+3 454 400 205 410 drw to srw still in pieces 90 3+3 350 400 205 410 srw 84 1/2 ton lb 6.2 4x4 parts truck



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.