|
03-31-2013, 05:50 PM | #1 |
Registered User
Join Date: Sep 2012
Location: San Antonio, Tx
Posts: 65
|
90 suburban cluster
I currently have the gauge cluster with the dummie lights in my 84 c10. I would like to use the cluster from a 90 suburban, i pulled the cluster with the connector and about 6" of wire. Does anyone have a good write up on how to repin this? Can use the stock temp and oil senders for the 84? The engine/ trans combo is a 5.3/4l60e out of a 02 Tahoe.
Posted via Mobile Device |
03-31-2013, 07:15 PM | #2 |
Registered User
Join Date: May 2012
Location: MacDill AFB\Tampa
Posts: 151
|
Re: 90 suburban cluster
Subscribed for the answer
|
03-31-2013, 08:34 PM | #3 | |
Senior Member
Join Date: Jul 2009
Location: Athens, AL
Posts: 499
|
Re: 90 suburban cluster
Quote:
Pin # - Function - Wire Color 1 - High Beam Indicator - Light Green/No Stripe 2 - Ground - Black 3 - Oil Pressure Gauge From Sender - Light Brown/No Stripe 4 - 12 Volt + Keyed From Ignition - Pink/Black Stripe 5 - Low Voltage Warning Lamp - Dark Brown/No Stripe 6 - Not Used 7 - Not Used 8 - Coolant Temperature Gauge From Sender - Turquoise/No Stripe 9 - 12 Volt + Controlled By Headlight Switch - Light Gray/No Stripe 10 - Left Turn Signal Indicator - Light Blue/No Stripe 11 - Right Turn Signal Indicator - Dark Blue/No Stripe 12 - 4x4 Indicator Lamp - Separate wire from 18 Pin Connector 13 - Seat Belt Warning Lamp - Yellow/No Stripe 14 - Fuel Gauge From Sender - Pink/No Stripe 15 - Park Brake/Unequal Pressure Warning Lamp - Light Brown/White Stripe 16 - SES (Service Engine Soon) Lamp - Dark Brown/White Stripe 17 - 12 Volt + Keyed From Ignition Switch - Pink/Black Stripe 18 - Speedometer From Sender - Light Blue/Black Stripe Temp senders are different between '84 and '90. The '84 is 1/2 pipe thread and the '90 is 3/8 pipe thread. Oil pressure senders are electrically different and don't interchange. |
|
03-31-2013, 11:32 PM | #4 |
Registered User
Join Date: Sep 2012
Location: San Antonio, Tx
Posts: 65
|
Re: 90 suburban cluster
So I need to Repin my connector to match the one the suburban? Can I use senders that match the 90 cluster?
Posted via Mobile Device |
04-02-2013, 06:35 PM | #5 | |
Slots go on anything!
Join Date: May 2003
Location: Richardson, TX
Posts: 5,957
|
Re: 90 suburban cluster
Quote:
Use the senders for the '90 cluster. Last edited by Jonboy; 04-02-2013 at 06:51 PM. |
|
04-01-2013, 07:16 PM | #6 |
Registered User
Join Date: Sep 2012
Location: San Antonio, Tx
Posts: 65
|
Re: 90 suburban cluster
Anyone else??
Posted via Mobile Device |
04-03-2013, 11:55 AM | #7 |
Registered User
Join Date: Apr 2008
Location: columbus indiana
Posts: 86
|
Re: 90 suburban cluster
i have the same gauge cluster out of a suburban with the electric speedo running a 5.3 4l60e in my 86 c10 im running a psiconversion harness guess im a little confused on wiring it up can i just change out the entire gauge cluster from the suburban and make them work from the computer
|
04-03-2013, 12:04 PM | #8 | |
Registered User
Join Date: Sep 2012
Location: San Antonio, Tx
Posts: 65
|
Re: 90 suburban cluster
Quote:
Posted via Mobile Device |
|
12-11-2014, 02:09 PM | #9 |
Registered User
Join Date: Apr 2008
Location: columbus indiana
Posts: 86
|
Re: 90 suburban cluster
which wire on the suburban gauge cluster turns the gauge lights on i have everything working but the gauge lights
|
12-11-2014, 03:08 PM | #10 |
Senior Member
Join Date: Jul 2009
Location: Athens, AL
Posts: 499
|
Re: 90 suburban cluster
|
Bookmarks |
|
|