The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1947 - 1959 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 04-01-2013, 11:57 PM   #1
NW Task Force
Registered User
 
NW Task Force's Avatar
 
Join Date: Feb 2011
Location: Poulsbo, WA USA
Posts: 247
Question Aftermarket Underbed Fuel Tank Filler Neck/Cap Options

I was wondering how many folks on here are running the underbed tanks sold in the catalogs? Specifically, I am looking at what options I have for filler necks and fuel caps. I want to make the fuel cap flush or slightly counter-sunk into my wood bed. Right now, I would need an incredibly short filler neck to make this work. I bought an aftermarket filler tube w/cap.........way too tall! What are people using to make these tanks work with filler necks & caps? I would much rather return the filler neck/cap I bought and find something that directly bolts on without much hassle. I attached some photos to show my problem..........
Attached Images
   
__________________
1957 Chevy Pickup 1/2T, stepside, big window, 77' Camaro subframe, 3rd gen Firebird rearend w/3.23 gears & disc brakes, 66' 283cid, TH350 auto, everything else is original
NW Task Force is offline   Reply With Quote
Old 04-02-2013, 12:35 AM   #2
Dan in Pasadena
Senior Member

 
Dan in Pasadena's Avatar
 
Join Date: Nov 2008
Location: Glendora, CA
Posts: 6,344
Re: Aftermarket Underbed Fuel Tank Filler Neck/Cap Options

Question: Are you bolting that tank onto the top or the bottom flange of the frame?

If the top flange, would the tank hang too low if you droped it to the bottom flange?

If you leave it where it is, can you modify that filler neck or insert it INTO the tank opening with a rubber sleeve and clamps?
Dan in Pasadena is offline   Reply With Quote
Old 04-02-2013, 09:58 AM   #3
Denee007
Senior Member
 
Denee007's Avatar
 
Join Date: May 2011
Location: Cypress, Tx.
Posts: 1,504
Re: Aftermarket Underbed Fuel Tank Filler Neck/Cap Options

Well, I'm going to tag along with you on your thread~ you know I'll encounter the same problem when it comes time to install my bed! I just called Brothertrucks to see if they know anything, but they're not open yet.
dne'

__________________
'72 Ford Bronco project(July 17 2021-?)
https://67-72chevytrucks.com/vboard/...d.php?t=828015
59 Apache (sold 6-25-2021)
67 Ford Mustang (re-restored after Harvey)
1968 Jeep Cj5 (2-8-2020 to present)
1992 Jeep Yj (8-17-20 to present) (Jurassic build)

www.Classiccarsandtools.com
Denee007 is offline   Reply With Quote
Old 04-28-2013, 05:34 PM   #4
roger55
Registered User
 
roger55's Avatar
 
Join Date: Feb 2010
Location: San Angelo, Tx
Posts: 1,068
Re: Aftermarket Underbed Fuel Tank Filler Neck/Cap Options

Quote:
Originally Posted by Denee007 View Post
Well, I'm going to tag along with you on your thread~ you know I'll encounter the same problem when it comes time to install my bed! I just called Brothertrucks to see if they know anything, but they're not open yet.
dne'

It looks like the setup that I showed in my previous post is not going to work.

Would you do me a big favor and measure the height of that tank. Both in the rear where it's stepped down and in the front? I'm am having trouble finding those measurements anywhere online.

Also, I think I found that that rectangle dimensions at the bottom are 28" X 17 3/4". Is that correct?

I want to make sure it would fit my '57 " longbed ("89). The rearward crossmember in my truck is different than yours. I'd also like to see exactly how low this hangs down too.

I would sure appreciate the info.
roger55 is offline   Reply With Quote
Old 04-02-2013, 12:18 PM   #5
Denee007
Senior Member
 
Denee007's Avatar
 
Join Date: May 2011
Location: Cypress, Tx.
Posts: 1,504
Re: Aftermarket Underbed Fuel Tank Filler Neck/Cap Options

I just went out and placed a slat of my floor down by the gas tank inlet.
I just got off the phone with Brothers, I'm sure other vendors have stuff as well. It's just that Brother's is where I bought my tank. The links below offer some ideas~ I hope this helps that there is hope
dne'

http://www.brotherstrucks.com/prodin...number=SFF4787

http://www.brotherstrucks.com/prodin...number=BFDOVAL

http://www.brotherstrucks.com/prodin...number=BFDRECT

__________________
'72 Ford Bronco project(July 17 2021-?)
https://67-72chevytrucks.com/vboard/...d.php?t=828015
59 Apache (sold 6-25-2021)
67 Ford Mustang (re-restored after Harvey)
1968 Jeep Cj5 (2-8-2020 to present)
1992 Jeep Yj (8-17-20 to present) (Jurassic build)

www.Classiccarsandtools.com
Denee007 is offline   Reply With Quote
Old 04-02-2013, 12:54 PM   #6
Daze57
Registered User
 
Daze57's Avatar
 
Join Date: Jul 2011
Location: Las Vegas - Nev. aka Sin City
Posts: 1,835
Re: Aftermarket Underbed Fuel Tank Filler Neck/Cap Options

imho i think dan has a good idea cut what ya dont need off and use a rubber sleeve and clamps - have seen it b4 and seems to work out well
good luck !
Daze57 is offline   Reply With Quote
Old 04-02-2013, 05:38 PM   #7
skip99
Registered User
 
skip99's Avatar
 
Join Date: Oct 2010
Location: mt vernon, oh
Posts: 868
Re: Aftermarket Underbed Fuel Tank Filler Neck/Cap Options

Are those tanks able to be removed from below?
In case of a problem once the bed is on?
Posted via Mobile Device
__________________
Tami's 51 build

http://67-72chevytrucks.com/vboard/s...d.php?t=428878
skip99 is offline   Reply With Quote
Old 04-02-2013, 05:56 PM   #8
Denee007
Senior Member
 
Denee007's Avatar
 
Join Date: May 2011
Location: Cypress, Tx.
Posts: 1,504
Re: Aftermarket Underbed Fuel Tank Filler Neck/Cap Options

Quote:
Originally Posted by skip99 View Post
Are those tanks able to be removed from below?
In case of a problem once the bed is on?
Posted via Mobile Device
Hi skip! yes, it can be lowered down. On the right frame beside my tank, you can see one of the nut things? That bar goes down on the lower part of the frame, NOT where it is in the pic. Marking the holes for this was kind of a chore, but when located, then welded that bar into place. I'm using my Little Mule II to hold the tank in place. It's actually a pretty neat tank! I'd like to hear what NW Task force had to say about the install~

http://www.classiccarsandtools.com/?s=little+mule


__________________
'72 Ford Bronco project(July 17 2021-?)
https://67-72chevytrucks.com/vboard/...d.php?t=828015
59 Apache (sold 6-25-2021)
67 Ford Mustang (re-restored after Harvey)
1968 Jeep Cj5 (2-8-2020 to present)
1992 Jeep Yj (8-17-20 to present) (Jurassic build)

www.Classiccarsandtools.com

Last edited by Denee007; 04-02-2013 at 05:58 PM. Reason: link added
Denee007 is offline   Reply With Quote
Old 04-03-2013, 12:16 AM   #9
NW Task Force
Registered User
 
NW Task Force's Avatar
 
Join Date: Feb 2011
Location: Poulsbo, WA USA
Posts: 247
Re: Aftermarket Underbed Fuel Tank Filler Neck/Cap Options

Quote:
Originally Posted by Denee007 View Post
I'd like to hear what NW Task force had to say about the install~
The tank install was fairly easy. I bought mine from Classic Parts 55-59 catalog. I was kinda disapointed with the mounting holes/straps........one of my straps had to be shaved down to fit the inside frame rail. It was a little extra work, but worth it when it was all completed.

So are people cutting down the tank tube inlet or the aftermarket filler neck/cap assembly.............or a combination of both? Just wanted to clarify that. I am glad so many people are chiming in with options and pics.
__________________
1957 Chevy Pickup 1/2T, stepside, big window, 77' Camaro subframe, 3rd gen Firebird rearend w/3.23 gears & disc brakes, 66' 283cid, TH350 auto, everything else is original
NW Task Force is offline   Reply With Quote
Old 04-06-2013, 10:48 PM   #10
lowrodderchev
Registered User
 
lowrodderchev's Avatar
 
Join Date: Dec 2011
Location: visalia ca
Posts: 1,480
Re: Aftermarket Underbed Fuel Tank Filler Neck/Cap Options

Quote:
Originally Posted by Daze57 View Post
imho i think dan has a good idea cut what ya dont need off and use a rubber sleeve and clamps - have seen it b4 and seems to work out well
good luck !
I have the same filler did this to cut it down but I used a mustang tank
lowrodderchev is offline   Reply With Quote
Old 04-07-2013, 07:34 PM   #11
NW Task Force
Registered User
 
NW Task Force's Avatar
 
Join Date: Feb 2011
Location: Poulsbo, WA USA
Posts: 247
Re: Aftermarket Underbed Fuel Tank Filler Neck/Cap Options

Starterman99,

Wow! Thanks for the great under bed photos! I will probably go with this method. I will document the process and post pics of the results. I know other folks are wanting to see more and get inspired.
__________________
1957 Chevy Pickup 1/2T, stepside, big window, 77' Camaro subframe, 3rd gen Firebird rearend w/3.23 gears & disc brakes, 66' 283cid, TH350 auto, everything else is original
NW Task Force is offline   Reply With Quote
Old 04-14-2013, 04:45 AM   #12
bobinbc
Registered User
 
bobinbc's Avatar
 
Join Date: Mar 2009
Location: Vancouver Island, Courtenay B.C. CANADA
Posts: 576
Re: Aftermarket Underbed Fuel Tank Filler Neck/Cap Options

Quote:
Originally Posted by lowrodderchev View Post
I have the same filler did this to cut it down but I used a mustang tank
LOwrodderchev, I sure would like to see how you adapted that mustang tank neck to the filler neck, I'm using the mustang tank too. It comes up on a bit of an angle, did you just join the two with a piece of hose ?
__________________
1962 Chevy blue SBFS
1957 Chevy yellow SBSS
1956 GMC red SBSS Nov 2017 ToTM

https://www.facebook.com/groups/Cana...geChevyTrucks/
bobinbc is offline   Reply With Quote
Old 04-26-2013, 12:56 AM   #13
NW Task Force
Registered User
 
NW Task Force's Avatar
 
Join Date: Feb 2011
Location: Poulsbo, WA USA
Posts: 247
Starterman99.............are you out there?

This question is for Starterman99........... what are you using for a gas tank vent? (tubing size, fittings, etc?) I am looking at my options on what to do for my tank vent. Thanks!
__________________
1957 Chevy Pickup 1/2T, stepside, big window, 77' Camaro subframe, 3rd gen Firebird rearend w/3.23 gears & disc brakes, 66' 283cid, TH350 auto, everything else is original
NW Task Force is offline   Reply With Quote
Old 04-26-2013, 09:40 AM   #14
Nordic
Registered User
 
Nordic's Avatar
 
Join Date: Jun 2011
Location: Unionville CT
Posts: 168
Re: Aftermarket Underbed Fuel Tank Filler Neck/Cap Options

I have the same type set-up, I used a length of 3/8 fuel line with a breather from a differential, tied up along the frame so it is as high as possible.
Nordic is offline   Reply With Quote
Old 04-26-2013, 11:11 AM   #15
starterman99
Registered User
 
starterman99's Avatar
 
Join Date: Jun 2008
Location: santa maria,ca.
Posts: 312
Re: Starterman99.............are you out there?

Quote:
Originally Posted by NW Task Force View Post
This question is for Starterman99........... what are you using for a gas tank vent? (tubing size, fittings, etc?) I am looking at my options on what to do for my tank vent. Thanks!
I basicly did the same as was just stated.3/8 fuel hose ran from top of tank over top of frame and secured to fender bolt.
__________________
1957 3100
1950 5 window
starterman99 is offline   Reply With Quote
Old 04-02-2013, 07:29 PM   #16
starterman99
Registered User
 
starterman99's Avatar
 
Join Date: Jun 2008
Location: santa maria,ca.
Posts: 312
Re: Aftermarket Underbed Fuel Tank Filler Neck/Cap Options

Thats the same one I used.I had to cut it down.when you cut hole in bed wood you need to be right on target theres not much room for flex if your not lined up with tank filler.Epecially if you countersink the filler to be flush with surface of wood.

__________________
1957 3100
1950 5 window
starterman99 is offline   Reply With Quote
Old 04-02-2013, 08:24 PM   #17
Denee007
Senior Member
 
Denee007's Avatar
 
Join Date: May 2011
Location: Cypress, Tx.
Posts: 1,504
Re: Aftermarket Underbed Fuel Tank Filler Neck/Cap Options

That is really nice Starteman!
Posted via Mobile Device
__________________
'72 Ford Bronco project(July 17 2021-?)
https://67-72chevytrucks.com/vboard/...d.php?t=828015
59 Apache (sold 6-25-2021)
67 Ford Mustang (re-restored after Harvey)
1968 Jeep Cj5 (2-8-2020 to present)
1992 Jeep Yj (8-17-20 to present) (Jurassic build)

www.Classiccarsandtools.com
Denee007 is offline   Reply With Quote
Old 04-02-2013, 08:45 PM   #18
Dan in Pasadena
Senior Member

 
Dan in Pasadena's Avatar
 
Join Date: Nov 2008
Location: Glendora, CA
Posts: 6,344
Re: Aftermarket Underbed Fuel Tank Filler Neck/Cap Options

Quote:
Originally Posted by Denee007 View Post
That is really nice Starteman!
Posted via Mobile Device
It's beautiful!

Can we see some more pictures of your truck please?
Dan in Pasadena is offline   Reply With Quote
Old 04-02-2013, 09:10 PM   #19
Denee007
Senior Member
 
Denee007's Avatar
 
Join Date: May 2011
Location: Cypress, Tx.
Posts: 1,504
Re: Aftermarket Underbed Fuel Tank Filler Neck/Cap Options

I just have one more question please? With cap so small, would gasoline bubble up and get on the wood/varathane, or whatever it is coated with?
Posted via Mobile Device
__________________
'72 Ford Bronco project(July 17 2021-?)
https://67-72chevytrucks.com/vboard/...d.php?t=828015
59 Apache (sold 6-25-2021)
67 Ford Mustang (re-restored after Harvey)
1968 Jeep Cj5 (2-8-2020 to present)
1992 Jeep Yj (8-17-20 to present) (Jurassic build)

www.Classiccarsandtools.com
Denee007 is offline   Reply With Quote
Old 04-03-2013, 11:15 AM   #20
starterman99
Registered User
 
starterman99's Avatar
 
Join Date: Jun 2008
Location: santa maria,ca.
Posts: 312
Re: Aftermarket Underbed Fuel Tank Filler Neck/Cap Options

Quote:
Originally Posted by Denee007 View Post
I just have one more question please? With cap so small, would gasoline bubble up and get on the wood/varathane, or whatever it is coated with?
Posted via Mobile Device
I have not had any problem filling up .but I have never filled more after nozzle clicks off.the nozzle goes down into filler more than on new cars because it does not have the restrictor inside.
__________________
1957 3100
1950 5 window
starterman99 is offline   Reply With Quote
Old 04-04-2013, 11:13 AM   #21
NW Task Force
Registered User
 
NW Task Force's Avatar
 
Join Date: Feb 2011
Location: Poulsbo, WA USA
Posts: 247
Question Re: Aftermarket Underbed Fuel Tank Filler Neck/Cap Options

Quote:
Originally Posted by starterman99 View Post
I have not had any problem filling up .but I have never filled more after nozzle clicks off.the nozzle goes down into filler more than on new cars because it does not have the restrictor inside.
Starterman99, did you have to cut down the filler neck/cap or the tank neck. Or maybe even a combination of both? I have the same filler neck/cap as the one pictured with your pickup. Thanks
__________________
1957 Chevy Pickup 1/2T, stepside, big window, 77' Camaro subframe, 3rd gen Firebird rearend w/3.23 gears & disc brakes, 66' 283cid, TH350 auto, everything else is original
NW Task Force is offline   Reply With Quote
Old 04-04-2013, 12:16 PM   #22
starterman99
Registered User
 
starterman99's Avatar
 
Join Date: Jun 2008
Location: santa maria,ca.
Posts: 312
Re: Aftermarket Underbed Fuel Tank Filler Neck/Cap Options

Quote:
Originally Posted by NW Task Force View Post
Starterman99, did you have to cut down the filler neck/cap or the tank neck. Or maybe even a combination of both? I have the same filler neck/cap as the one pictured with your pickup. Thanks
I only cut down the fillerneck,but I think when all assembled there was only 1/4" space between the two parts.getting the clamps in position and tightening was a little challenging as theres not much room up there to see or manuver a screwdriver or ratchet.I only had 3 or 4 inches of hose length if I remember right.Alignment is very important.That may be why you see a lot with the big square fuel door in the bed floor.
__________________
1957 3100
1950 5 window
starterman99 is offline   Reply With Quote
Old 04-04-2013, 01:07 PM   #23
NW Task Force
Registered User
 
NW Task Force's Avatar
 
Join Date: Feb 2011
Location: Poulsbo, WA USA
Posts: 247
Re: Aftermarket Underbed Fuel Tank Filler Neck/Cap Options

Quote:
Originally Posted by starterman99 View Post
I only cut down the fillerneck,but I think when all assembled there was only 1/4" space between the two parts.getting the clamps in position and tightening was a little challenging as theres not much room up there to see or manuver a screwdriver or ratchet.I only had 3 or 4 inches of hose length if I remember right.Alignment is very important.That may be why you see a lot with the big square fuel door in the bed floor.
Thank You! I appreciate the quick response to my question. Right now I am using a one-piece stained sheet of plywood for my bed floor. It looks decent until I can later afford oak planks and polished stainless strips. The tank is mounted on the lower chassis flange, so pulling it down later would not be a big deal if I had to. I will definitely keep your measurements in mind while I modify the filler neck/cap to work.
__________________
1957 Chevy Pickup 1/2T, stepside, big window, 77' Camaro subframe, 3rd gen Firebird rearend w/3.23 gears & disc brakes, 66' 283cid, TH350 auto, everything else is original
NW Task Force is offline   Reply With Quote
Old 04-03-2013, 07:30 AM   #24
fabguy
Elev8r Man
 
fabguy's Avatar
 
Join Date: Aug 2010
Location: Glendora, CA
Posts: 835
Re: Aftermarket Underbed Fuel Tank Filler Neck/Cap Options

This thread is perfect timing as I will be starting mine in a couple of weeks.
Posted via Mobile Device
__________________
1955.2 C4 Carry-all / Suburban ---> 55.2 Build Thread!!
1958 Fleetside SWB ---> 58 Fleetside Build thread
1939 2 door sedan

My F.B. project page.
fabguy is offline   Reply With Quote
Old 04-03-2013, 09:22 AM   #25
Denee007
Senior Member
 
Denee007's Avatar
 
Join Date: May 2011
Location: Cypress, Tx.
Posts: 1,504
Re: Aftermarket Underbed Fuel Tank Filler Neck/Cap Options

Sometimes some of the "simplest" installations wind up being frustrating! Threads like this answer some of the questions/concerns that arise which hopefully if someone utilizes the search, they would be able seek an answer to their concern. Though this particular gas tank installation should be a no brainer and straight forward, we (everyone here) as fabricators problem solve all the time generally with good results, if not we go back to the drawing board and seek more answers, that's why I'm here on this wonderful site, to get answers and possibly helping another
Posted via Mobile Device
Posted via Mobile Device
Posted via Mobile Device
__________________
'72 Ford Bronco project(July 17 2021-?)
https://67-72chevytrucks.com/vboard/...d.php?t=828015
59 Apache (sold 6-25-2021)
67 Ford Mustang (re-restored after Harvey)
1968 Jeep Cj5 (2-8-2020 to present)
1992 Jeep Yj (8-17-20 to present) (Jurassic build)

www.Classiccarsandtools.com
Denee007 is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 11:18 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com