LS1 air intake for a 67-72 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

chevy72blu · 04-08-2013, 12:40 PM

I have gone through lots of build threads, but I cant seem to find what I'm looking for.

What air intake setups are you using in your 67-72? I've seen some real cheap ones on ebay for around $60-70, but its difficult to envision what is going to fit and what wont from pictures.

I think just a simple 90* coming out of the TB with a 6-7" pipe and cone filter would work best. Street and Performance also makes a square element that bolts right to the TB. Any downside to this?

Also, what size tubing are you using? I am using the OEM 98' LS1 TB and MAF

Thanks!

edit: I am using a '98 F body rad and e-fan setup

mooseknuckles · 04-08-2013, 05:30 PM

mine is a k&n cai for a 99-up silverado.. fit pretty good, didnt use the box thing tho....can't see why it wouldn't work for 67-72's

85burb · 04-08-2013, 09:02 PM

That is what I am using too. Not a 67-72 but for the price buy it and cut the angle part off if you don't like it. 69 bucks shipped.
Posted via Mobile Device

cjohnson6772 · 04-23-2013, 07:57 PM

Quote:

Originally Posted by 85burb

That is what I am using too. Not a 67-72 but for the price buy it and cut the angle part off if you don't like it. 69 bucks shipped.
Posted via Mobile Device

Can you post a link at that price? I'm seeking them at like $300 plus!

85burb · 04-23-2013, 08:03 PM

Here ya go. Hope it works. http://item.mobileweb.ebay.com/viewi...id=38484525345
Posted via Mobile Device
Posted via Mobile Device

cjohnson6772 · 04-23-2013, 08:09 PM

Quote:

Originally Posted by 85burb

Here ya go. Hope it works. http://item.mobileweb.ebay.com/viewi...id=38484525345
Posted via Mobile Device
Posted via Mobile Device

Looks good. I guess I had been searching for K&N brand and getting those $$$ results. I'll probably just get that one in black though. Thanks!
Posted via Mobile Device

mooseknuckles · 04-23-2013, 08:39 PM

Quote:

Originally Posted by cjohnson6772

Can you post a link at that price? I'm seeking them at like $300 plus!

sounds about right....

85burb · 04-23-2013, 08:59 PM

I have two set up two different ways. The red one is 20-21 from filter base to middle of throttle body. The blue one is 23-24.
Posted via Mobile Device
Posted via Mobile Device

mcmlxix · 04-09-2013, 12:40 AM

I started with a 90* silicone elbow and a K&N filter, both with a 4" inner diameter. What I have come to find out is that the MAF is slightly smaller outer diameter. I still need at piece of 4" pipe too.. I feel like I should have just bought a kit. I may save a few bucks in the end, but its a pain piecing it all together...

85burb · 04-09-2013, 08:28 AM

That is why I got a kit again. I was way over 70 bucks for the parts I wanted to make the intake and was having to use a tiny air filter. The one in my pic was 69 shipped with everything.
Posted via Mobile Device

Wasted Income · 04-09-2013, 10:41 AM

Here's my air intake.

Kinda looks like one of these Tornados inside.

G8DAN · 04-09-2013, 10:59 AM

Hahaha nicely done ^^^

chevy72blu · 04-09-2013, 12:35 PM

Thank you all for the help, this is perfect.

Do those tornado things really make more power?

Wasted Income · 04-09-2013, 01:28 PM

Mine does. haha.

themb2g · 04-09-2013, 10:35 PM

Spectre makes one for an ls swap into a 69-72 truck. I'd show you pics of mine but I haven't installed it yet.

Wasted Income · 04-10-2013, 10:24 AM

Quote:

Originally Posted by chevy72blu

I think just a simple 90* coming out of the TB with a 6-7" pipe and cone filter would work best. Street and Performance also makes a square element that bolts right to the TB. Any downside to this?

Also, what size tubing are you using? I am using the OEM 98' LS1 TB and MAF

Ok now that i'm done being a smartass, I will answer your question. I would come off the TB with a 90* silicone elbow, 3.5 or 4" aluminum tube to the MAF (with silicone couplings on either side to connect to the tubing, then more tubing to your air filter location. Basically the same as mcmlxix mentioned.

FYI, since you're running a MAF (and not running Speed Density), you will not be able to come directly off the TB with a filter, unless you have room to sandwich the MAF in there.

I was MAFless on my jet boat, and did just the filter.

The monte carlo I built just had a quick and dirty intake on it. I have since put another 90 on the end to get the filter in front of the radiator to draw less warm air. I was seeing some pretty high IATs on hot days with it sucking under hood heat.

I'm a DIY guy, so I'd have a hard time paying someone to put something this simple together for me.

If you want to source the parts to do it yourself, I've had good luck with
www.siliconeintakes.com and www.racepartsolutions.com for finding silicone elbows, t-bolt clamps, aluminum tubing, air filters, etc.

Quote:

Originally Posted by themb2g

Spectre makes one for an ls swap into a 69-72 truck. I'd show you pics of mine but I haven't installed it yet.

That's pretty cool that they are developing a product for such a niche market.

BigShoe24 · 04-23-2013, 10:41 PM

Street & Performance
Posted via Mobile Device
Posted via Mobile Device

68GMCCustom · 04-23-2013, 11:09 PM

you running a SD tune BigShoe?

littlevictories · 02-19-2014, 10:24 PM

bought one of those cheap ebay CAI's
this one
http://www.ebay.com/itm/SIERRA-SILVE...fd4583&vxp=mtr

seems exactly like every other one i have seen. $65 shipped.

the seller included a 10% discount code if anyone needs it

K2-110109

good till the end of may

Andy4639 · 02-19-2014, 11:29 PM

Here is mine. 90's caddy air box sealed up and drilled 4" hole in the bottom. Took and drilled a 4" hole in the radiator support placed a coupling in the front with a ninty with another coupling in the air box. K&N filter then ran to TB.

**Hart_Rod** · 02-20-2014, 02:56 PM

I built this one to fit into the old battery box.

littlevictories · 02-21-2014, 01:34 AM

Quote:

Originally Posted by Hart_Rod

I built this one to fit into the old battery box.

nice work on that radiator support. you metal fab for a living?

**Hart_Rod** · 02-21-2014, 09:35 AM

Quote:

Originally Posted by littlevictories

nice work on that radiator support. you metal fab for a living?

Thanks, but I didn't build that part. I bought it from board member JoeLutz. He sells them on his website, http://www.hotroddynamics.com/shop/v...p?productid=30.

Wasted Income · 02-21-2014, 10:19 AM

Quote:

Originally Posted by littlevictories

nice work on that radiator support. you metal fab for a living?

I built something similar for mine, but dimple died it the opposite direction. Cost me a little less than $115

I will admit I got the idea from JoeLutz' deal.

**Hart_Rod** · 02-21-2014, 10:26 AM

Quote:

Originally Posted by Wasted Income

I built something similar for mine, but dimple died it the opposite direction. Cost me a little less than $115

I will admit I got the idea from JoeLutz' deal.

LOL, I'm sure it was cheaper. I need to buy a set of the dimple dies. Where did you get yours from?

04-08-2013, 12:40 PM	#1
chevy72blu Registered User Join Date: Apr 2004 Location: Las Vegas, NV Posts: 2,188	LS1 air intake for a 67-72 I have gone through lots of build threads, but I cant seem to find what I'm looking for. What air intake setups are you using in your 67-72? I've seen some real cheap ones on ebay for around $60-70, but its difficult to envision what is going to fit and what wont from pictures. I think just a simple 90* coming out of the TB with a 6-7" pipe and cone filter would work best. Street and Performance also makes a square element that bolts right to the TB. Any downside to this? Also, what size tubing are you using? I am using the OEM 98' LS1 TB and MAF Thanks! edit: I am using a '98 F body rad and e-fan setup __________________ RIP EastSideLowLife '72 C20 SWB convert. 5 lug, LS1/4l60e Last edited by chevy72blu; 04-08-2013 at 12:47 PM.

04-08-2013, 05:30 PM	#2
mooseknuckles Registered User Join Date: Sep 2009 Location: ottawa,canada Posts: 4,550	Re: LS1 air intake for a 67-72 mine is a k&n cai for a 99-up silverado.. fit pretty good, didnt use the box thing tho....can't see why it wouldn't work for 67-72's Attached Images __________________ my build threads '86 C10 http://67-72chevytrucks.com/vboard/s...d.php?t=415628 '67 C10 http://67-72chevytrucks.com/vboard/s...d.php?t=635078 '63 GMC http://67-72chevytrucks.com/vboard/s...d.php?t=674682

04-08-2013, 09:02 PM	#3
85burb Registered User Join Date: Dec 2009 Location: lindale,tx Posts: 2,373	Re: LS1 air intake for a 67-72 That is what I am using too. Not a 67-72 but for the price buy it and cut the angle part off if you don't like it. 69 bucks shipped. Posted via Mobile Device Attached Images __________________ 82 c10 5.3/4l60 84 c20 5.3/sm465 85 chevy k10 suburban LQ4/4l60 91 chevy c10 suburban Lsa 5.3/4l60 2017 Silverado whipple 5.3 1964 Vw beetle 1974 vw beetle

04-23-2013, 08:03 PM	#5
85burb Registered User Join Date: Dec 2009 Location: lindale,tx Posts: 2,373	Re: LS1 air intake for a 67-72 Here ya go. Hope it works. http://item.mobileweb.ebay.com/viewi...id=38484525345 Posted via Mobile Device Posted via Mobile Device __________________ 82 c10 5.3/4l60 84 c20 5.3/sm465 85 chevy k10 suburban LQ4/4l60 91 chevy c10 suburban Lsa 5.3/4l60 2017 Silverado whipple 5.3 1964 Vw beetle 1974 vw beetle

04-23-2013, 08:59 PM	#8
85burb Registered User Join Date: Dec 2009 Location: lindale,tx Posts: 2,373	Re: LS1 air intake for a 67-72 I have two set up two different ways. The red one is 20-21 from filter base to middle of throttle body. The blue one is 23-24. Posted via Mobile Device Posted via Mobile Device Attached Images __________________ 82 c10 5.3/4l60 84 c20 5.3/sm465 85 chevy k10 suburban LQ4/4l60 91 chevy c10 suburban Lsa 5.3/4l60 2017 Silverado whipple 5.3 1964 Vw beetle 1974 vw beetle

04-09-2013, 12:40 AM	#9
mcmlxix Collector of Projects Join Date: Apr 2003 Location: Las Vegas Posts: 3,106	Re: LS1 air intake for a 67-72 I started with a 90* silicone elbow and a K&N filter, both with a 4" inner diameter. What I have come to find out is that the MAF is slightly smaller outer diameter. I still need at piece of 4" pipe too.. I feel like I should have just bought a kit. I may save a few bucks in the end, but its a pain piecing it all together... __________________ Rich 1972 K5 Blazer CST Click HERE D60 BIG BRAKE UPGRADE Click HERE

04-09-2013, 08:28 AM	#10
85burb Registered User Join Date: Dec 2009 Location: lindale,tx Posts: 2,373	Re: LS1 air intake for a 67-72 That is why I got a kit again. I was way over 70 bucks for the parts I wanted to make the intake and was having to use a tiny air filter. The one in my pic was 69 shipped with everything. Posted via Mobile Device __________________ 82 c10 5.3/4l60 84 c20 5.3/sm465 85 chevy k10 suburban LQ4/4l60 91 chevy c10 suburban Lsa 5.3/4l60 2017 Silverado whipple 5.3 1964 Vw beetle 1974 vw beetle

04-09-2013, 10:41 AM	#11
Wasted Income Boosted Member Join Date: May 2002 Location: Mackinaw, IL Posts: 2,200	Re: LS1 air intake for a 67-72 Here's my air intake. Kinda looks like one of these Tornados inside. __________________ 1972 2wd K/5 Blazer Turbocharged 370 LSx - 941 rwhp / 1093 rwtq 1969 Chevy K-10 L33 5.3 / 4L80E / NP241 / 4" lift 1964 Buick Skylark Twin TURBO 383 LS pro-touring project 2014 VW Passat TDI - Daily Driver Turbo diesel 2015 Sierra Denali HD Duramax Turbo diesel 2023 Ford Explorer ST - Twin Turbskis 2023 Ford F150 RCSB - Whipple Supercharged 2017 Polaris RZR Turbo 2014 Nor-Tech Center Console - Twin Supercharged Outboards *TURBO ALL THE THINGS!!*

04-09-2013, 10:59 AM	#12
G8DAN Registered User Join Date: Dec 2012 Location: Sylmar, CA Posts: 79	Re: LS1 air intake for a 67-72 Hahaha nicely done ^^^

04-09-2013, 12:35 PM	#13
chevy72blu Registered User Join Date: Apr 2004 Location: Las Vegas, NV Posts: 2,188	Re: LS1 air intake for a 67-72 Thank you all for the help, this is perfect. Do those tornado things really make more power? __________________ RIP EastSideLowLife '72 C20 SWB convert. 5 lug, LS1/4l60e

04-09-2013, 01:28 PM	#14
Wasted Income Boosted Member Join Date: May 2002 Location: Mackinaw, IL Posts: 2,200	Re: LS1 air intake for a 67-72 Mine does. haha. __________________ 1972 2wd K/5 Blazer Turbocharged 370 LSx - 941 rwhp / 1093 rwtq 1969 Chevy K-10 L33 5.3 / 4L80E / NP241 / 4" lift 1964 Buick Skylark Twin TURBO 383 LS pro-touring project 2014 VW Passat TDI - Daily Driver Turbo diesel 2015 Sierra Denali HD Duramax Turbo diesel 2023 Ford Explorer ST - Twin Turbskis 2023 Ford F150 RCSB - Whipple Supercharged 2017 Polaris RZR Turbo 2014 Nor-Tech Center Console - Twin Supercharged Outboards *TURBO ALL THE THINGS!!*

04-09-2013, 10:35 PM	#15
themb2g Registered User Join Date: Jul 2010 Location: Portland, Oregon Posts: 411	Re: LS1 air intake for a 67-72 Spectre makes one for an ls swap into a 69-72 truck. I'd show you pics of mine but I haven't installed it yet. __________________ Check out my build: 1972 LQ4 Swap http://67-72chevytrucks.com/vboard/s...=1#post5427693

04-23-2013, 10:41 PM	#17
BigShoe24 True Addiction Join Date: Nov 2005 Location: FTL Posts: 415	Re: LS1 air intake for a 67-72 Street & Performance Posted via Mobile Device Posted via Mobile Device Attached Images __________________ RCC

04-23-2013, 11:09 PM	#18
68GMCCustom Truck and auto performance nut Join Date: Feb 2007 Location: McKinney,Texas Posts: 3,848	Re: LS1 air intake for a 67-72 you running a SD tune BigShoe? __________________ Kurt - '68 GMC short step - NIB '09 LY6 6.0L crate motor w/mods, NIB '12 crate 4L85e w/billet 3k stall Circle D, 3.73 posi 12 bolt, DynaTech f-swap headers, 3/4 drop, handling mods, etc. - my toy '72 Chevy LWB C-10 Highlander - 350/350 ps/pb/tilt/ac - not original but close '06 Chevy TrailBlazerSS - LS2/4L70e - little black hot rod SUV - my DD '18 Kia Sorento - wife's econo-driver '95 Chevy S10 - reg cab shortbed, LS, 4.3, auto... my '68's powertrain and chassis build -links broken A surprise phase - carb to efi -links broken

02-19-2014, 10:24 PM	#19
littlevictories Registered User Join Date: Dec 2013 Location: Portland, Ore. Posts: 348	Re: LS1 air intake for a 67-72 bought one of those cheap ebay CAI's this one http://www.ebay.com/itm/SIERRA-SILVE...fd4583&vxp=mtr seems exactly like every other one i have seen. $65 shipped. the seller included a 10% discount code if anyone needs it K2-110109 good till the end of may



Register or Log In To remove these advertisements.

02-19-2014, 11:29 PM	#20
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: LS1 air intake for a 67-72 Here is mine. 90's caddy air box sealed up and drilled 4" hole in the bottom. Took and drilled a 4" hole in the radiator support placed a coupling in the front with a ninty with another coupling in the air box. K&N filter then ran to TB. Attached Images __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

02-20-2014, 02:56 PM	#21
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,858	Re: LS1 air intake for a 67-72 I built this one to fit into the old battery box. Attached Images __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

Register or Log In To remove these advertisements.