Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
|
06-22-2003, 12:00 AM | #1 |
Registered User
Join Date: Mar 2002
Location: Bondurant, IA but in Worcester, MA for school
Posts: 767
|
Desperatly Need Rear Leaf Spring U-Bolts
I really need a set of rear leaf spring u-bolts for my 70 C20. I have the completly wrong ones on there now and dont feel safe driving it. So please let me know if you have a set you can sell me. Thanks
HotRod
__________________
1970 Chevy C-20 350 V-8 Turbo 350 w/ shift kit Dana 60 w/ 4.10 gears AND Powr-Loc POSI New Additions: Summit Headers 135amp alternator Proform HEI Edelbrock 1406 600cfm carb Sunpro Tach Powr-Loc POSI Edelbrock Performer RPM Intake MSD 6A Ignition Box AIM: HotRod929 Visit My Site: http://1970chevy.netfirms.com/ |
06-22-2003, 11:06 AM | #2 |
Senior Member
Join Date: Jan 2003
Location: daytonabeach
Posts: 22,956
|
shouldn't be a big deal to get them locally check the yellow pages under automotive springs/suspension there should be quite a few in your area it's not the best practice to use uesd u-bolts
__________________
71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY |
06-22-2003, 11:29 AM | #3 |
Registered User
Join Date: Aug 2001
Location: Long Beach, Ca
Posts: 1,432
|
try LMC, they should have them
__________________
71 LWB 350/350still working on it but it's going tp be sweet. www.geocities.com/stevemau/slam33page.html " TARGET=_blank>http://www.geocities.com/stevemau/slam33page.html?1004806705410 </A> |
06-22-2003, 12:32 PM | #4 |
Registered User
Join Date: Mar 2002
Location: Bondurant, IA but in Worcester, MA for school
Posts: 767
|
I did try LMC but they could not tell me how thick the u-bolts were because arnt the C10 and C20 bolts different sizes. The C10s are like 1/2" and the C20s are 5/8" or something right?
HotRod
__________________
1970 Chevy C-20 350 V-8 Turbo 350 w/ shift kit Dana 60 w/ 4.10 gears AND Powr-Loc POSI New Additions: Summit Headers 135amp alternator Proform HEI Edelbrock 1406 600cfm carb Sunpro Tach Powr-Loc POSI Edelbrock Performer RPM Intake MSD 6A Ignition Box AIM: HotRod929 Visit My Site: http://1970chevy.netfirms.com/ |
06-22-2003, 03:17 PM | #5 |
Registered User
Join Date: Nov 2002
Posts: 461
|
I have a set of ubolts from a 78, plus the lower plates. i will not be using them. if you get me $10. for shipping, you can have them.
send me an email if you still need 'em shamrockcustoms@yahoo.com |
06-22-2003, 03:29 PM | #6 |
Registered User
Join Date: Mar 2002
Location: Bondurant, IA but in Worcester, MA for school
Posts: 767
|
CustomChevy - Thanks but I dont think they will fit. The 67-72 trucks had 2.25" wide leafs and the 73-up trucks had 2.5"wide leafs i believe. Please set me strait if I am worng. I have a set of universal ones that I got at the local AutoZone but they are much skinnyer and there is about .25" space on ether side of the leaf. Thanks
HotRod
__________________
1970 Chevy C-20 350 V-8 Turbo 350 w/ shift kit Dana 60 w/ 4.10 gears AND Powr-Loc POSI New Additions: Summit Headers 135amp alternator Proform HEI Edelbrock 1406 600cfm carb Sunpro Tach Powr-Loc POSI Edelbrock Performer RPM Intake MSD 6A Ignition Box AIM: HotRod929 Visit My Site: http://1970chevy.netfirms.com/ |
Bookmarks |
|
|