VA Need power steering low pressure fitting - The 1947 - Present Chevrolet & GMC Truck Message Board Network

VA72C10 · 06-11-2013, 10:28 PM

Need the fitting that screws into the box and has a short section of metal tubing that you put the power steering hose onto. I have a new high pressure line but haven't been able to locate my low pressure fitting and the ones I've sen in the parts stores haven't looked correct.

**truckdude239** · 06-11-2013, 10:42 PM

I bought my return hose from advance auto parts and it had that fitting in the hose witha pressure clamp just srew in and go ill see if i can find the number for u
Posted via Mobile Device

**truckdude239** · 06-11-2013, 10:46 PM

http://m.advanceautoparts.com/mt/sho...009%7CL3*15710

Hose with fitting
Posted via Mobile Device

**truckdude239** · 06-11-2013, 10:48 PM

http://m.advanceautoparts.com/mt/sho...009%7CL3*15710

Just the fitting
Posted via Mobile Device

VA72C10 · 06-11-2013, 10:53 PM

Thanks a ton! I had them look it up in the store and they couldn't find anything. I will call and see if they stock either of those part numbers or order it.

**truckdude239** · 06-12-2013, 03:25 AM

Np i broke mine i thought i was screwed till i found thoses
Posted via Mobile Device

VA72C10 · 06-15-2013, 08:59 PM

looking at that again and it comes straight up. That would be into my inner fender...will see if I can bend it but does anyone else have an option they've used that looks more like the high pressure hose that lays flat against the frame with a tight bend coming out of the ps gearbox? Thanks

VA72C10 · 06-15-2013, 09:04 PM

See this drawing on LMC...I can order one of these but would rather pick one up local because I need it within the next week.

http://www.lmctruck.com/icatalog/cb/full.aspx?Page=128

pickupman · 06-15-2013, 10:17 PM

Jonathon, Inline tube carries the correct one. I do not think I have in stock but I will check for you tomorrow

Bill

VA72C10 · 06-15-2013, 11:10 PM

Quote:

Originally Posted by pickupman

Jonathon, Inline tube carries the correct one. I do not think I have in stock but I will check for you tomorrow

Bill

Thanks Bill

mr_earnhardt1 · 06-18-2013, 10:46 PM

I'd be interested in one too...any pictures to verify? Thanks!

pickupman · 06-20-2013, 10:00 PM

Sorry, did not have any in stock

VA72C10 · 06-20-2013, 10:40 PM

Thanks for checking. Do you know the correct part number by chance?

pickupman · 06-21-2013, 08:30 PM

Cts7101

VA72C10 · 06-21-2013, 08:34 PM

Thank you very much! Have a great weekend!

Steve Cole · 06-21-2013, 11:08 PM

I need one too!

LMC charges too much for shipping when you just buy a cheap part or two, it's not worth it. Last time I paid almost 11 dollars shipping for a 5 dollar part.
Posted via Mobile Device

06-11-2013, 10:28 PM	#1
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Need power steering low pressure fitting Need the fitting that screws into the box and has a short section of metal tubing that you put the power steering hose onto. I have a new high pressure line but haven't been able to locate my low pressure fitting and the ones I've sen in the parts stores haven't looked correct. __________________ Looking for a 67-72 swb or blazer project in or around VA.

06-11-2013, 10:42 PM	#2
truckdude239 Senior Member Join Date: Sep 2005 Location: Lewisville, Nc Posts: 10,238	Re: Need power steering low pressure fitting I bought my return hose from advance auto parts and it had that fitting in the hose witha pressure clamp just srew in and go ill see if i can find the number for u Posted via Mobile Device __________________ David fuller Ase Certified Mechanic Click here to help support our board!! 1971 Chevy c-10 under going a 4.8l LSx swap Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=421305 2007 Honda Accord my daily 145kmiles 2002 Honda Accord 4 door With 330k(sisters car) 2005 toyota Avalon 228k( brothers car) 2002 Sububran 5.3 245k 2000 Tahoe 5.3l 378 General manager for Marco's Carwash & lube

06-11-2013, 10:46 PM	#3
truckdude239 Senior Member Join Date: Sep 2005 Location: Lewisville, Nc Posts: 10,238	Re: Need power steering low pressure fitting http://m.advanceautoparts.com/mt/sho...009%7CL315710 Hose with fitting Posted via Mobile Device* __________________ David fuller Ase Certified Mechanic Click here to help support our board!! 1971 Chevy c-10 under going a 4.8l LSx swap Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=421305 2007 Honda Accord my daily 145kmiles 2002 Honda Accord 4 door With 330k(sisters car) 2005 toyota Avalon 228k( brothers car) 2002 Sububran 5.3 245k 2000 Tahoe 5.3l 378 General manager for Marco's Carwash & lube

06-11-2013, 10:48 PM	#4
truckdude239 Senior Member Join Date: Sep 2005 Location: Lewisville, Nc Posts: 10,238	Re: Need power steering low pressure fitting http://m.advanceautoparts.com/mt/sho...009%7CL315710 Just the fitting Posted via Mobile Device* __________________ David fuller Ase Certified Mechanic Click here to help support our board!! 1971 Chevy c-10 under going a 4.8l LSx swap Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=421305 2007 Honda Accord my daily 145kmiles 2002 Honda Accord 4 door With 330k(sisters car) 2005 toyota Avalon 228k( brothers car) 2002 Sububran 5.3 245k 2000 Tahoe 5.3l 378 General manager for Marco's Carwash & lube

06-11-2013, 10:53 PM	#5
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Need power steering low pressure fitting Thanks a ton! I had them look it up in the store and they couldn't find anything. I will call and see if they stock either of those part numbers or order it. __________________ Looking for a 67-72 swb or blazer project in or around VA.

06-12-2013, 03:25 AM	#6
truckdude239 Senior Member Join Date: Sep 2005 Location: Lewisville, Nc Posts: 10,238	Re: Need power steering low pressure fitting Np i broke mine i thought i was screwed till i found thoses Posted via Mobile Device __________________ David fuller Ase Certified Mechanic Click here to help support our board!! 1971 Chevy c-10 under going a 4.8l LSx swap Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=421305 2007 Honda Accord my daily 145kmiles 2002 Honda Accord 4 door With 330k(sisters car) 2005 toyota Avalon 228k( brothers car) 2002 Sububran 5.3 245k 2000 Tahoe 5.3l 378 General manager for Marco's Carwash & lube

06-15-2013, 08:59 PM	#7
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Need power steering low pressure fitting looking at that again and it comes straight up. That would be into my inner fender...will see if I can bend it but does anyone else have an option they've used that looks more like the high pressure hose that lays flat against the frame with a tight bend coming out of the ps gearbox? Thanks __________________ Looking for a 67-72 swb or blazer project in or around VA.

06-15-2013, 09:04 PM	#8
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Need power steering low pressure fitting See this drawing on LMC...I can order one of these but would rather pick one up local because I need it within the next week. http://www.lmctruck.com/icatalog/cb/full.aspx?Page=128 __________________ Looking for a 67-72 swb or blazer project in or around VA.

06-15-2013, 10:17 PM	#9
pickupman Registered User Join Date: Dec 2000 Location: Greeneville, TN Posts: 3,097	Re: Need power steering low pressure fitting Jonathon, Inline tube carries the correct one. I do not think I have in stock but I will check for you tomorrow Bill __________________ atheystruck@comcast.net 67 1/2 ton 4wd custom cab 72 1/2 ton 4wd super cheyenne 71 1/2 BB super cheyenne shortbed

06-18-2013, 10:46 PM	#11
mr_earnhardt1 Registered User Join Date: Jun 2012 Location: Fall River, WI Posts: 20	Re: Need power steering low pressure fitting I'd be interested in one too...any pictures to verify? Thanks!

06-20-2013, 10:00 PM	#12
pickupman Registered User Join Date: Dec 2000 Location: Greeneville, TN Posts: 3,097	Re: Need power steering low pressure fitting Sorry, did not have any in stock __________________ atheystruck@comcast.net 67 1/2 ton 4wd custom cab 72 1/2 ton 4wd super cheyenne 71 1/2 BB super cheyenne shortbed

06-20-2013, 10:40 PM	#13
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Need power steering low pressure fitting Thanks for checking. Do you know the correct part number by chance? __________________ Looking for a 67-72 swb or blazer project in or around VA.

06-21-2013, 08:30 PM	#14
pickupman Registered User Join Date: Dec 2000 Location: Greeneville, TN Posts: 3,097	Re: Need power steering low pressure fitting Cts7101 __________________ atheystruck@comcast.net 67 1/2 ton 4wd custom cab 72 1/2 ton 4wd super cheyenne 71 1/2 BB super cheyenne shortbed

06-21-2013, 08:34 PM	#15
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Need power steering low pressure fitting Thank you very much! Have a great weekend! __________________ Looking for a 67-72 swb or blazer project in or around VA.

06-21-2013, 11:08 PM	#16
Steve Cole Registered User Join Date: May 2012 Location: Faith,NC Posts: 1,626	Re: Need power steering low pressure fitting I need one too! LMC charges too much for shipping when you just buy a cheap part or two, it's not worth it. Last time I paid almost 11 dollars shipping for a 5 dollar part. Posted via Mobile Device



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.