LA WTB: Inner heater box/core parts SEE PIC - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1972Blaze · 07-04-2013, 11:06 PM

I need these parts. They hold the heater core in place in the box. I do not know what they are called, but mine are all rusted. Need a good set. Thanks.

**Todd68Chevy** · 07-05-2013, 08:47 AM

I have a few good pairs but I will not be home until late Sunday. If you have not found any by then, I will get pictures and price. Thanks

1972Blaze · 07-05-2013, 08:57 AM

That would be great. Thanks.
Posted via Mobile Device

1972Blaze · 07-06-2013, 08:58 AM

TTT
Posted via Mobile Device
Posted via Mobile Device

midniteblues · 07-06-2013, 09:28 AM

be carefull i dont belive those peices are all the same in my pic you can see these were about 1/4" too short(yes yes i know its a aftermarket heater core)
i hade three sets an without knowing i refinished a set an they didnt fit. so after scratching my head for awhile i looked at the others i had an realized one set had longer legs....gotta love rework.

btw if your intrested the set in the pic is available

**specialtyretail** · 07-06-2013, 09:45 AM

I have these. $9.00 shipped. Thanks, Fred

1972Blaze · 07-06-2013, 03:37 PM

Fred and Midnite Blues,

They look different, but maybe they would work. How tall are they and how far apart are the screw holes, center to center? Also, do you have a good clip like this one? I just figured out this is not part of the heater core.

**Todd68Chevy** · 07-09-2013, 10:32 PM

Quote:

Originally Posted by 1972Blaze

I need these parts. They hold the heater core in place in the box. I do not know what they are called, but mine are all rusted. Need a good set. Thanks.

Quote:

Originally Posted by 1972Blaze

Fred and Midnite Blues,

They look different, but maybe they would work. How tall are they and how far apart are the screw holes, center to center? Also, do you have a good clip like this one? I just figured out this is not part of the heater core.

Are these parts from an A/C truck or a non A/C truck? I am thinking that you have an A/C truck. Where does the line holder go? Does it fit in the box?

**Todd68Chevy** · 07-09-2013, 10:17 AM

Do you still need parts.

1972Blaze · 07-09-2013, 11:08 AM

Yes I do. Please let me know what you have. Thanks.
Posted via Mobile Device

**specialtyretail** · 07-09-2013, 08:00 PM

approx 1 3/4 deep, 5 1/4 center to center. Thanks, Fred.

**Todd68Chevy** · 07-10-2013, 07:41 AM

I think what you are looking for is out of an a/c truck. Here is what I have from a 67 a/c box. I have not measured them but I can if I need to. $20.00 shipped to you USPS First Class Mail or $23.00 USPS Priority Mail. Thanks

1972Blaze · 07-10-2013, 11:53 AM

Yes, it is an A/C truck. I'll take the best set you have. PM patent info. Thanks.
Posted via Mobile Device

**Todd68Chevy** · 07-11-2013, 06:50 AM

PayPal payment received but I do not have a shipping address. PM me your shipping address and I will get them sent out.

1972Blaze · 07-13-2013, 10:03 PM

Todd, thanks for the great parts. But evidently the earlier models had a different heater core. These pieces are too tall.

So I am still looking, but I need the ones like these that wrap around the tubes of a heater core of a truck with AC. The ones I need are just about 1 7/8" tall. The ones from Todd are 2 1/4".

If anyone can help let me know.
Posted via Mobile Device

**Todd68Chevy** · 07-13-2013, 10:12 PM

Quote:

Originally Posted by 1972Blaze

Todd, thanks for the great parts. But evidently the earlier models had a different heater core. These pieces are too tall.

So I am still looking, but I need the ones like these that wrap around the tubes of a heater core of a truck with AC. The ones I need are just about 1 7/8" tall. The ones from Todd are 2 1/4".

If anyone can help let me know.
Posted via Mobile Device

They said we needed to measure and I did not. Sorry about that. Let me look tommorow an see if I have any others. I will let you know and we will swap them out of something. Is the extra part that holds the line correct? Sorry again.

1972Blaze · 07-13-2013, 10:28 PM

Quote:

Originally Posted by Todd68Chevy

They said we needed to measure and I did not. Sorry about that. Let me look tommorow an see if I have any others. I will let you know and we will swap them out of something. Is the extra part that holds the line correct? Sorry again.

Don't worry about it. You and I both thought we knew what they were. If you have some of the shorter ones that would be great. Let me know. The clip for the tubes is an exact match. Thanks.

**Todd68Chevy** · 07-14-2013, 11:47 AM

Quote:

Originally Posted by 1972Blaze

Don't worry about it. You and I both thought we knew what they were. If you have some of the shorter ones that would be great. Let me know. The clip for the tubes is an exact match. Thanks.

I pulled a HVAC box out of a 72 and it looks like it has the correct ones. The one is a little rusty on the end but still checks solid. I will send these to you tomorrow USPS Priority Mail. I will give you $3.60 back to cover the shipping and you can send me the wrong ones back. USPS First Class Mail. Thanks

72cheyenneman · 07-14-2013, 12:52 PM

These are out of a '72 Cheyenne 350, A/C, original. $20 shipped. Reply to thread if you need them.

**Todd68Chevy** · 07-16-2013, 07:59 AM

Here is what I have. I think these are the screws that you need. The only defrost ducts that I have in black are these. The bottom of them are not black so they may be painted. $6.00 extra if you want the vents. I am not sure if the a/c trucks use one round and one oval vent or not. Do you know what you need?

Ok yesterday I could not get on here and then when I did it would kick me off. Know I can not post pictures?? I will send them to the email that you paid from.

07-04-2013, 11:06 PM	#1
1972Blaze Registered User Join Date: May 2013 Location: Covington, Louisiana Posts: 243	WTB: Inner heater box/core parts SEE PIC I need these parts. They hold the heater core in place in the box. I do not know what they are called, but mine are all rusted. Need a good set. Thanks. Attached Images __________________ 1972 K5 Blazer Cheyenne 1966 L72 Corvette Convertible 2016 GMC Yukon Denali

07-05-2013, 08:47 AM	#2
Todd68Chevy Senior Member Join Date: Oct 2009 Location: Shelburn Indiana Posts: 3,975	Re: WTB: Inner heater box/core parts SEE PIC I have a few good pairs but I will not be home until late Sunday. If you have not found any by then, I will get pictures and price. Thanks __________________ Note: All parts I have for sale are also for sale locally. I currently own: 1940 Chevy Fire truck (project), 1946 Chevy truck (project), 1946 Chevy 1 Ton pick up, 1953 Chevy school bus (storage area), 1968 Chevy C10 (I have drove for 26 years), 1994 Chevy C2500 (daily driver), 2005 GMC crew cab K2500 (parts hauler) and more trucks for parts.

07-05-2013, 08:57 AM	#3
1972Blaze Registered User Join Date: May 2013 Location: Covington, Louisiana Posts: 243	Re: WTB: Inner heater box/core parts SEE PIC That would be great. Thanks. Posted via Mobile Device __________________ 1972 K5 Blazer Cheyenne 1966 L72 Corvette Convertible 2016 GMC Yukon Denali

07-06-2013, 08:58 AM	#4
1972Blaze Registered User Join Date: May 2013 Location: Covington, Louisiana Posts: 243	Re: WTB: Inner heater box/core parts SEE PIC TTT Posted via Mobile Device Posted via Mobile Device __________________ 1972 K5 Blazer Cheyenne 1966 L72 Corvette Convertible 2016 GMC Yukon Denali

07-06-2013, 09:28 AM	#5
midniteblues Registered User Join Date: Jul 2011 Location: strausstown pa Posts: 3,394	Re: WTB: Inner heater box/core parts SEE PIC be carefull i dont belive those peices are all the same in my pic you can see these were about 1/4" too short(yes yes i know its a aftermarket heater core) i hade three sets an without knowing i refinished a set an they didnt fit. so after scratching my head for awhile i looked at the others i had an realized one set had longer legs....gotta love rework. btw if your intrested the set in the pic is available Attached Images __________________ 81 camaro 355 4/spd 342 posi my first love. 67 swb step 454/4spd ott 373 posi 4/7 drop. 2000 s10 zr2 little blue truck that never gets stuck. '74 heald super bronc vt8. tecumseh powered moon rover.

07-06-2013, 09:45 AM	#6
specialtyretail So,, what else you got??? Join Date: May 2010 Location: Jackson, Mo Posts: 18,634	Re: WTB: Inner heater box/core parts SEE PIC I have these. $9.00 shipped. Thanks, Fred Attached Images __________________ Our paypal is specialtyretail@yahoo.com Please DO NOTsend paypal funds as a gift, right is right. Thanks.... Sorry, we CANNOT ship larger parts. Thanks.

07-06-2013, 03:37 PM	#7
1972Blaze Registered User Join Date: May 2013 Location: Covington, Louisiana Posts: 243	Re: WTB: Inner heater box/core parts SEE PIC Fred and Midnite Blues, They look different, but maybe they would work. How tall are they and how far apart are the screw holes, center to center? Also, do you have a good clip like this one? I just figured out this is not part of the heater core. Attached Images __________________ 1972 K5 Blazer Cheyenne 1966 L72 Corvette Convertible 2016 GMC Yukon Denali

07-09-2013, 10:17 AM	#9
Todd68Chevy Senior Member Join Date: Oct 2009 Location: Shelburn Indiana Posts: 3,975	Re: WTB: Inner heater box/core parts SEE PIC Do you still need parts. __________________ Note: All parts I have for sale are also for sale locally. I currently own: 1940 Chevy Fire truck (project), 1946 Chevy truck (project), 1946 Chevy 1 Ton pick up, 1953 Chevy school bus (storage area), 1968 Chevy C10 (I have drove for 26 years), 1994 Chevy C2500 (daily driver), 2005 GMC crew cab K2500 (parts hauler) and more trucks for parts.

07-09-2013, 11:08 AM	#10
1972Blaze Registered User Join Date: May 2013 Location: Covington, Louisiana Posts: 243	Re: WTB: Inner heater box/core parts SEE PIC Yes I do. Please let me know what you have. Thanks. Posted via Mobile Device __________________ 1972 K5 Blazer Cheyenne 1966 L72 Corvette Convertible 2016 GMC Yukon Denali

07-09-2013, 08:00 PM	#11
specialtyretail So,, what else you got??? Join Date: May 2010 Location: Jackson, Mo Posts: 18,634	Re: WTB: Inner heater box/core parts SEE PIC approx 1 3/4 deep, 5 1/4 center to center. Thanks, Fred. __________________ Our paypal is specialtyretail@yahoo.com Please DO NOTsend paypal funds as a gift, right is right. Thanks.... Sorry, we CANNOT ship larger parts. Thanks.

07-10-2013, 07:41 AM	#12
Todd68Chevy Senior Member Join Date: Oct 2009 Location: Shelburn Indiana Posts: 3,975	Re: WTB: Inner heater box/core parts SEE PIC I think what you are looking for is out of an a/c truck. Here is what I have from a 67 a/c box. I have not measured them but I can if I need to. $20.00 shipped to you USPS First Class Mail or $23.00 USPS Priority Mail. Thanks Attached Images __________________ Note: All parts I have for sale are also for sale locally. I currently own: 1940 Chevy Fire truck (project), 1946 Chevy truck (project), 1946 Chevy 1 Ton pick up, 1953 Chevy school bus (storage area), 1968 Chevy C10 (I have drove for 26 years), 1994 Chevy C2500 (daily driver), 2005 GMC crew cab K2500 (parts hauler) and more trucks for parts.

07-10-2013, 11:53 AM	#13
1972Blaze Registered User Join Date: May 2013 Location: Covington, Louisiana Posts: 243	Re: WTB: Inner heater box/core parts SEE PIC Yes, it is an A/C truck. I'll take the best set you have. PM patent info. Thanks. Posted via Mobile Device __________________ 1972 K5 Blazer Cheyenne 1966 L72 Corvette Convertible 2016 GMC Yukon Denali

07-11-2013, 06:50 AM	#14
Todd68Chevy Senior Member Join Date: Oct 2009 Location: Shelburn Indiana Posts: 3,975	Re: WTB: Inner heater box/core parts SEE PIC PayPal payment received but I do not have a shipping address. PM me your shipping address and I will get them sent out. __________________ Note: All parts I have for sale are also for sale locally. I currently own: 1940 Chevy Fire truck (project), 1946 Chevy truck (project), 1946 Chevy 1 Ton pick up, 1953 Chevy school bus (storage area), 1968 Chevy C10 (I have drove for 26 years), 1994 Chevy C2500 (daily driver), 2005 GMC crew cab K2500 (parts hauler) and more trucks for parts.

07-13-2013, 10:03 PM	#15
1972Blaze Registered User Join Date: May 2013 Location: Covington, Louisiana Posts: 243	Re: WTB: Inner heater box/core parts SEE PIC Todd, thanks for the great parts. But evidently the earlier models had a different heater core. These pieces are too tall. So I am still looking, but I need the ones like these that wrap around the tubes of a heater core of a truck with AC. The ones I need are just about 1 7/8" tall. The ones from Todd are 2 1/4". If anyone can help let me know. Posted via Mobile Device __________________ 1972 K5 Blazer Cheyenne 1966 L72 Corvette Convertible 2016 GMC Yukon Denali

07-14-2013, 12:52 PM	#19
72cheyenneman Registered User Join Date: Nov 2009 Location: New Orleans, Louisiana Posts: 610	Re: WTB: Inner heater box/core parts SEE PIC These are out of a '72 Cheyenne 350, A/C, original. $20 shipped. Reply to thread if you need them.



Register or Log In To remove these advertisements.

07-16-2013, 07:59 AM	#20
Todd68Chevy Senior Member Join Date: Oct 2009 Location: Shelburn Indiana Posts: 3,975	Re: WTB: Inner heater box/core parts SEE PIC Here is what I have. I think these are the screws that you need. The only defrost ducts that I have in black are these. The bottom of them are not black so they may be painted. $6.00 extra if you want the vents. I am not sure if the a/c trucks use one round and one oval vent or not. Do you know what you need? Ok yesterday I could not get on here and then when I did it would kick me off. Know I can not post pictures?? I will send them to the email that you paid from. __________________ Note: All parts I have for sale are also for sale locally. I currently own: 1940 Chevy Fire truck (project), 1946 Chevy truck (project), 1946 Chevy 1 Ton pick up, 1953 Chevy school bus (storage area), 1968 Chevy C10 (I have drove for 26 years), 1994 Chevy C2500 (daily driver), 2005 GMC crew cab K2500 (parts hauler) and more trucks for parts.

Register or Log In To remove these advertisements.