|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
08-22-2013, 12:51 AM
|
#1 |
|
Fabricate till you "puke"
Join Date: Jun 2002
Location: Ill
Posts: 9,402
|
5.3 head gasket guestion?
I dug up the numbers in Oreillys site, for the head set (2000 GMC 5.3). There is a number listed for 99-01 (HS9292PT).... also a listing for 02-08 (HS26191PT). Both are Felpro numbers, but it appears that the 02 up has the MLS gaskets ? My question, is will the later set work with my 2000 engine, or are there differences in some of the other gaskets in the set? Thanks for any thoughts on this.... Longhorn
__________________
69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears.... |
|
|
|
08-22-2013, 01:20 AM
|
#2 |
|
meowMEOWmeowMEOW
Join Date: Sep 2009
Location: MKE WI
Posts: 7,128
|
Re: 5.3 head gasket guestion?
Old style heads have this little notch and use a graphite gasket, not the MLS gasket that the newer style uses. The metal MLS gasket will leak on that head.
__________________
'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING  |
|
|
|
|
08-22-2013, 01:34 AM
|
#3 |
|
Fabricate till you "puke"
Join Date: Jun 2002
Location: Ill
Posts: 9,402
|
Re: 5.3 head gasket guestion?
Many thanks for the pic! just to clearify...is it the old style on the bottom in the pic? Thanks again...longhorn
__________________
69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears.... |
|
|
|
|
08-22-2013, 10:27 PM
|
#4 |
|
meowMEOWmeowMEOW
Join Date: Sep 2009
Location: MKE WI
Posts: 7,128
|
Re: 5.3 head gasket guestion?
yep
__________________
'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING |
|
|
|
|
08-23-2013, 10:53 AM
|
#5 |
|
Registered User
Join Date: Jul 2005
Location: AL
Posts: 1,828
|
Re: 5.3 head gasket guestion?
this site is amazing.... lots of others gain from this too.. so .. thank you
__________________
" |
|
|
|
|
08-23-2013, 05:18 PM
|
#6 |
|
Fabricate till you "puke"
Join Date: Jun 2002
Location: Ill
Posts: 9,402
|
Re: 5.3 head gasket guestion?
Thanks again! I just got the heads back from the shop & no notch....looks like I am going for the MLS set
 Longhorn
__________________
69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears.... |
|
|
|
|
| Bookmarks |
|
|
\\ MY YOUTUBE CHANNEL
Hybrid Mode
