The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1960 - 1966 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 09-06-2013, 06:22 PM   #1
michael.castro63!
Registered User
 
Join Date: Jan 2013
Location: spring valley, California
Posts: 48
Help!

My truck just stopped running I had changed the fuel pump and ran it a good mile than it just turned off on me...after it turned off it would turn on but as soon as I give it gas it would turns off again I've changed every line and the filter and I don't think it's my pump because we did get it running by putting the line that runs to the gas tank directly into a can of gas instead of to the tank
Posted via Mobile Device
michael.castro63! is offline   Reply With Quote
Old 09-06-2013, 08:08 PM   #2
T2vigil
Registered User
 
T2vigil's Avatar
 
Join Date: Jan 2010
Location: Evensville, TN
Posts: 236
Re: Help!

Just a shot in the dark but pull your gas cap off and see if the symptoms go away. If they do the the tank vent is plugged up.
T2vigil is offline   Reply With Quote
Old 09-06-2013, 08:13 PM   #3
Sharps40
Account Suspended
 
Join Date: Oct 2012
Location: here
Posts: 2,408
Re: Help!

Also, if its an old tank and had some gunk in there or the lines....a spanky new pump mighta sucked junk up in and the lines are now restricted....if the cap vent don't work,

Try disconnectin between pump and tank and carefully blowing out the line...if that don't work, pull the sender and check its hard line and the sock for junk too.

Luck!
Sharps40 is offline   Reply With Quote
Old 09-06-2013, 09:55 PM   #4
66Submarine
Registered User
 
66Submarine's Avatar
 
Join Date: Sep 2012
Location: Dallas, GA
Posts: 1,497
Re: Help!

Did you check the in tank pickup filter sock? That sounds like the problem. Been there and done that; you won't believe how plugged up one can get and still kinda work.
66Submarine is offline   Reply With Quote
Old 09-06-2013, 11:27 PM   #5
michael.castro63!
Registered User
 
Join Date: Jan 2013
Location: spring valley, California
Posts: 48
Re: Help!

I went all the way to the tank and pulled out that hose that goes into it and used a compressor to shoot air threw it shot out a bunch of rust and gunk starts right up and runs again! Thanks for the input!!
Posted via Mobile Device
michael.castro63! is offline   Reply With Quote
Old 09-06-2013, 11:35 PM   #6
jtrichard
Registered User
 
Join Date: Jun 2013
Location: joshua tree ca.
Posts: 1,484
Re: Help!

MAKE sure you put an inline filter between the tank and the pump or you will suck all that s@#t in your pump.... if you blew air in the tank ( A ) i hope the cap was off (B) you blew the (sock) off of the dip tube or at least blew it apart so you need a pre pump filter
jtrichard is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 12:08 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com