TX Free 3/4 ton spindles - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Jonboy · 09-24-2013, 09:39 PM

If someone might need them, I have the stock 3/4 ton spindles off of my '74 that I would happily give away if someone needed them. I won't ship them, but I can cart them home to Richardson (north D/FW) if it would help someone out. These suckers are heavy!!!

Jonboy · 09-27-2013, 11:46 AM

These aren't overpriced, are they?

**special-K** · 09-29-2013, 08:22 AM

No,but I'd gladly pay shipping if you were willing.

**special-K** · 09-30-2013, 07:26 AM

Are you concerned the weight will cause shipping to be too high? I could sure use these. I have some that are buggered up from bad bearings. I am willing to pay whatever shipping is,wait till it's convenient for you...whatever it takes. I need these and haven't had any luck finding locally.

Jonboy · 09-30-2013, 09:52 AM

Tim,
I have found a home for them locally. I have come to hate shipping anything that doesn't fit in a USPS priority mail box. Are these really that tough to find?

**special-K** · 10-01-2013, 07:15 AM

Well,GM doesn't have any more and you need to find someone parting out an axle. They would have fit in a flat rate box,but no worries.

Jonboy · 10-01-2013, 11:33 AM

Tim, these are (were) 2wd. with the rotors and all I think they might have mangled the box.

**special-K** · 10-01-2013, 10:12 PM

Oh,ok. My bad. I assumed these were 4wd since they are a separate part from the knuckle. It makes sense to me now. Glad you found someone that could use them

09-24-2013, 09:39 PM	#1
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	Free 3/4 ton spindles If someone might need them, I have the stock 3/4 ton spindles off of my '74 that I would happily give away if someone needed them. I won't ship them, but I can cart them home to Richardson (north D/FW) if it would help someone out. These suckers are heavy!!! __________________ 1974 Jimmy- 5.3/4L80e/NP241

09-27-2013, 11:46 AM	#2
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	Re: Free 3/4 ton spindles These aren't overpriced, are they? __________________ 1974 Jimmy- 5.3/4L80e/NP241

09-29-2013, 08:22 AM	#3
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Free 3/4 ton spindles No,but I'd gladly pay shipping if you were willing. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

09-30-2013, 07:26 AM	#4
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Free 3/4 ton spindles Are you concerned the weight will cause shipping to be too high? I could sure use these. I have some that are buggered up from bad bearings. I am willing to pay whatever shipping is,wait till it's convenient for you...whatever it takes. I need these and haven't had any luck finding locally. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

09-30-2013, 09:52 AM	#5
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	Re: Free 3/4 ton spindles Tim, I have found a home for them locally. I have come to hate shipping anything that doesn't fit in a USPS priority mail box. Are these really that tough to find? __________________ 1974 Jimmy- 5.3/4L80e/NP241

10-01-2013, 07:15 AM	#6
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Free 3/4 ton spindles Well,GM doesn't have any more and you need to find someone parting out an axle. They would have fit in a flat rate box,but no worries. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

10-01-2013, 11:33 AM	#7
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	Re: Free 3/4 ton spindles Tim, these are (were) 2wd. with the rotors and all I think they might have mangled the box. __________________ 1974 Jimmy- 5.3/4L80e/NP241

10-01-2013, 10:12 PM	#8
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Free 3/4 ton spindles Oh,ok. My bad. I assumed these were 4wd since they are a separate part from the knuckle. It makes sense to me now. Glad you found someone that could use them __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.