Need Some Parts: Vendor Recommendations? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

runpasthefence · 10-28-2013, 01:59 PM

I've been looking around and have found a few sources for some stuff I'm looking for, but I just thought I'd put it out there and see where you guys have gotten this stuff from.

I need headlights (bucket, lens, everything), tail lights, and a full glass kit all for a 1950 3 window 1/2 ton.

I've found a lot of halogen headlight assemblies, but I'd rather go conventional. I'm looking for original looking stuff.

Thanks

whiskeywayne · 10-28-2013, 02:15 PM

Classic Industries, www.classicindustries.com
Classic Parts, http://www.classicparts.com
Brothers, www.brotherstrucks.com
LMC, http://www.lmctruck.com
Jim Carter Chevy, http://www.oldchevytrucks.com
Chevs of the 40's, www.chevsofthe40s.com

_Ogre · 10-28-2013, 05:22 PM

lmc and brothers is where i got most of my stuff
order as much as you can at a time, shipping can add up quickly

Tomb23 · 10-28-2013, 05:29 PM

http://www.truckandcarshop.com/index.html

magicoolbus · 10-28-2013, 07:54 PM

Brother's accepts PayPal plus other plastic, LMC only plastic.

63 & 64 Bowties · 10-28-2013, 10:19 PM

Quote:

Originally Posted by magicoolbus

Brother's

Just a word of caution: runpasthefence, I see you're in SC. For some reason shipments from West Coast to East Coast via UPS are a LOT more than the other way around. No fault of Brothers (based in CA), but be sure to check the shipping charges before you pull the trigger. I like their products and prices, but I don't buy from them anymore because of high east-bound shipping charges.

runpasthefence · 10-28-2013, 10:54 PM

Thanks for the heads-up. I went through that recently when buying bedsides.

I think the most frustrating thing is I've yet to find an individual vendor that carries everything I need for this order and has it in stock. Either that, or their descriptions/pictures are so poor you don't know exactly what you're getting.

Minor problems in the grand scheme of things. I'm just glad to be rolling again on this project. I can't wait to show her off in the picture thread.

_Ogre · 10-30-2013, 02:46 PM

to add to 63&64bowties comment. seems a lot of vendors make a lot off of shipping and handling fees. i've found that the more you order the less you will pay on shipping. i try to keep a list and order a lot at one time. forgetting one small item hurts in shipping cost. ordering a lot is hard on the wallet, but it saves a lot of money.

Russell Ashley · 10-30-2013, 05:30 PM

You might try Obselete Chevy Parts in Nashville, Georgia. They are nice to deal with and the shipping would be cheaper than from the West coast. Also, Bow Tie Bits in Kansas is another source for parts. I've had good dealings with most of the vendors already listed but I try to use those closest to me because of the shipping charges. Most of the parts come from the same source so quality doesn't seem to vary regardless of where you buy them.

Hogger54 · 10-31-2013, 11:28 AM

How about quality differences between the vendors. For instance, I'm going to need a couple patch panels.
Do they all come from the same manufacturer?
Are some using ticker/thinner material than others? Do some have fitment issues over others?

10-28-2013, 01:59 PM	#1
runpasthefence Registered User Join Date: Sep 2008 Location: Charleston, SC Posts: 159	Need Some Parts: Vendor Recommendations? I've been looking around and have found a few sources for some stuff I'm looking for, but I just thought I'd put it out there and see where you guys have gotten this stuff from. I need headlights (bucket, lens, everything), tail lights, and a full glass kit all for a 1950 3 window 1/2 ton. I've found a lot of halogen headlight assemblies, but I'd rather go conventional. I'm looking for original looking stuff. Thanks

10-28-2013, 02:15 PM	#2
whiskeywayne Registered User Join Date: Feb 2013 Location: LA VALLE WI Posts: 7	Re: Need Some Parts: Vendor Recommendations? Classic Industries, www.classicindustries.com Classic Parts, http://www.classicparts.com Brothers, www.brotherstrucks.com LMC, http://www.lmctruck.com Jim Carter Chevy, http://www.oldchevytrucks.com Chevs of the 40's, www.chevsofthe40s.com __________________ 1950 Chevy 3100

10-28-2013, 05:22 PM	#3
_Ogre Registered User Join Date: Jan 2012 Location: Motown Posts: 7,680	Re: Need Some Parts: Vendor Recommendations? lmc and brothers is where i got most of my stuff order as much as you can at a time, shipping can add up quickly __________________ cool, an ogre smiley Ogre's 58 Truk build how to put your truck year and build thread into your signature shop air compressor timer

10-28-2013, 05:29 PM	#4
Tomb23 Registered User Join Date: May 2004 Location: Eastern Oregon Posts: 201	Re: Need Some Parts: Vendor Recommendations? http://www.truckandcarshop.com/index.html

10-28-2013, 07:54 PM	#5
magicoolbus Registered User Join Date: Jul 2010 Location: Mesa, AZ Posts: 513	Re: Need Some Parts: Vendor Recommendations? Brother's accepts PayPal plus other plastic, LMC only plastic. __________________ JB from AZ 1969 Chevy Sub K10 1957 Chevy 3200 1962 VW Beetle 1957 Willys CJ5 Last edited by magicoolbus; 10-28-2013 at 07:54 PM. Reason: typo

10-28-2013, 10:54 PM	#7
runpasthefence Registered User Join Date: Sep 2008 Location: Charleston, SC Posts: 159	Re: Need Some Parts: Vendor Recommendations? Thanks for the heads-up. I went through that recently when buying bedsides. I think the most frustrating thing is I've yet to find an individual vendor that carries everything I need for this order and has it in stock. Either that, or their descriptions/pictures are so poor you don't know exactly what you're getting. Minor problems in the grand scheme of things. I'm just glad to be rolling again on this project. I can't wait to show her off in the picture thread.

10-30-2013, 02:46 PM	#8
_Ogre Registered User Join Date: Jan 2012 Location: Motown Posts: 7,680	Re: Need Some Parts: Vendor Recommendations? to add to 63&64bowties comment. seems a lot of vendors make a lot off of shipping and handling fees. i've found that the more you order the less you will pay on shipping. i try to keep a list and order a lot at one time. forgetting one small item hurts in shipping cost. ordering a lot is hard on the wallet, but it saves a lot of money. __________________ cool, an ogre smiley Ogre's 58 Truk build how to put your truck year and build thread into your signature shop air compressor timer

10-30-2013, 05:30 PM	#9
Russell Ashley Registered User Join Date: May 2010 Location: Lawrenceville, Ga Posts: 2,648	Re: Need Some Parts: Vendor Recommendations? You might try Obselete Chevy Parts in Nashville, Georgia. They are nice to deal with and the shipping would be cheaper than from the West coast. Also, Bow Tie Bits in Kansas is another source for parts. I've had good dealings with most of the vendors already listed but I try to use those closest to me because of the shipping charges. Most of the parts come from the same source so quality doesn't seem to vary regardless of where you buy them.

10-31-2013, 11:28 AM	#10
Hogger54 Registered User Join Date: Aug 2013 Location: Lumberton, TX Posts: 284	Re: Need Some Parts: Vendor Recommendations? How about quality differences between the vendors. For instance, I'm going to need a couple patch panels. Do they all come from the same manufacturer? Are some using ticker/thinner material than others? Do some have fitment issues over others? __________________ My '54 3600 build. My '63 GMC build



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.