CA Patch panels - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Vova · 11-10-2013, 10:57 PM

Looks like I'll be cutting up the suburban. Let me know what you need.

xman · 11-11-2013, 11:13 AM

man wish i were closer I could really use the outter rear wheel well areas on both sides

**richard2717** · 11-11-2013, 02:29 PM

Would like a price for panels and shipping to 21826 business address.
Lower area between rear wheel arch and drivers door
Lower area from rear of arch to back tail light area
Lower area from tail light area to rear pass. wheel arch

as tall as you can cut them with shipping in mind. Interior part of panels not necessary.

Thanks
Richard

Vova · 11-11-2013, 04:02 PM

Please post pics of what areas you need.

**richard2717** · 11-11-2013, 04:14 PM

Basically the areas boxed in. The 1st picture is showing the front area I need but on the drivers side instead. Did not have a picture of driver side to show.
I would want it cut at a minimum at the factory body line just above where the lower molding would be.

Thanks
Richard

**richard2717** · 11-11-2013, 04:20 PM

I would even consider the entire panels cut in half for shipping. All I need is the outer skins

Richard

russgoodman · 11-11-2013, 04:40 PM

I'm needing a section of the low hump to patch up a butchered floor shift installation. I will attach a pic so you get an idea of what I need. My zip is 73527 business address and I like to pay through paypal. Thanks!
Russ

Vova · 11-11-2013, 08:43 PM

Quote:

Originally Posted by russgoodman

I'm needing a section of the low hump to patch up a butchered floor shift installation. I will attach a pic so you get an idea of what I need. My zip is 73527 business address and I like to pay through paypal. Thanks!
Russ

PM sent.

Vova · 11-11-2013, 08:44 PM

I'll also be selling both rear wheel wells that are in good condition.

Vova · 11-11-2013, 08:40 PM

Quote:

Originally Posted by richard2717

I would even consider the entire panels cut in half for shipping. All I need is the outer skins

Richard

I'll double check that the lower part is in good condition and let you know tonight.

**richard2717** · 11-11-2013, 11:32 PM

figure both wheel wells in with shipping on my other stuff too please

xman · 11-12-2013, 11:06 AM

looking for the areas highlited how much shipped. mine is rusted due to bad windshield gasket. it is the lip that the gasket wraps around when installed

Vova · 11-12-2013, 02:32 PM

Quote:

Originally Posted by xman

looking for the areas highlited how much shipped. mine is rusted due to bad windshield gasket. it is the lip that the gasket wraps around when installed

I will pull the windshield and make sure that area is in good shape.

SCOOBYDOOBYDOO · 11-12-2013, 09:27 PM

how much for the whole truck i will come pick it up i live in so cal 949-661-1819
johnny

Vova · 11-12-2013, 09:37 PM

Quote:

Originally Posted by SCOOBYDOOBYDOO

how much for the whole truck i will come pick it up i live in so cal 949-661-1819
johnny

I'm in northern CA about 6-7 hours away.

Bigdav160 · 11-13-2013, 07:01 PM

Quote:

Originally Posted by SCOOBYDOOBYDOO

how much for the whole truck i will come pick it up i live in so cal 949-661-1819
johnny

OOOOoooooo looks like you have a hot one after all this time.

xman · 11-13-2013, 11:00 AM

here are pics of the areas from my burb I am looking for to give you a better idea
Hopefully this will help

budnikguy · 11-13-2013, 11:35 AM

If VOVA cannot help you with these cuts..I can...as they are the same for truck and burb

Quote:

Originally Posted by xman

here are pics of the areas from my burb I am looking for to give you a better idea
Hopefully this will help

SCOOBYDOOBYDOO · 11-13-2013, 09:28 PM

Can I have pics from the inside roof frt area and outer frt drip rail

Vova · 11-13-2013, 10:07 PM

Quote:

Originally Posted by SCOOBYDOOBYDOO

Can I have pics from the inside roof frt area and outer frt drip rail

YEs I'll post some pics of all the areas you guys are looking for tonight.

Thanks,

Vova · 11-14-2013, 12:44 AM

more pics. The rocks have more rust than i though.

Vova · 11-14-2013, 12:54 AM

...

xman · 11-14-2013, 10:59 AM

I will have to pass on the patch I was looking for. Looks like yours is almost to the same point as mine is
Thanks for checking

Bigdav160 · 11-14-2013, 12:16 PM

I'm a glutton for punishment. How much for this section of dash? I realize the radio has been cut out.

Vova · 11-14-2013, 05:42 PM

Quote:

Originally Posted by Bigdav160

I'm a glutton for punishment. How much for this section of dash? I realize the radio has been cut out.

The key lock was also cut out.

11-10-2013, 10:57 PM	#1
Vova Registered User Join Date: Aug 2012 Location: Los gatos ca Posts: 1,299	Patch panels Looks like I'll be cutting up the suburban. Let me know what you need. Attached Images

11-11-2013, 11:13 AM	#2
xman Registered User Join Date: Mar 2009 Location: Channahon, IL Posts: 198	Re: Patch panels man wish i were closer I could really use the outter rear wheel well areas on both sides

11-11-2013, 02:29 PM	#3
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,155	Re: Patch panels Would like a price for panels and shipping to 21826 business address. Lower area between rear wheel arch and drivers door Lower area from rear of arch to back tail light area Lower area from tail light area to rear pass. wheel arch as tall as you can cut them with shipping in mind. Interior part of panels not necessary. Thanks Richard __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

11-11-2013, 04:02 PM	#4
Vova Registered User Join Date: Aug 2012 Location: Los gatos ca Posts: 1,299	Re: Patch panels Please post pics of what areas you need.

11-11-2013, 04:14 PM	#5
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,155	Re: Patch panels Basically the areas boxed in. The 1st picture is showing the front area I need but on the drivers side instead. Did not have a picture of driver side to show. I would want it cut at a minimum at the factory body line just above where the lower molding would be. Thanks Richard Attached Images __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

11-11-2013, 04:20 PM	#6
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,155	Re: Patch panels I would even consider the entire panels cut in half for shipping. All I need is the outer skins Richard Attached Images __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

11-11-2013, 04:40 PM	#7
russgoodman Registered User Join Date: Oct 2012 Location: Cache, OK Posts: 458	Re: Patch panels I'm needing a section of the low hump to patch up a butchered floor shift installation. I will attach a pic so you get an idea of what I need. My zip is 73527 business address and I like to pay through paypal. Thanks! Russ Attached Images __________________ 1969 Chevy C10 SWB Fleet - Build thread > http://67-72chevytrucks.com/vboard/s...d.php?t=593554 2008 GMC Sierra Denali - 6.2L AWD - my daily 2011 Ford Flex Limited - Ecoboost AWD - wife's daily 1987 Buick Regal Turbo T - 63K miles - Strip/Street car 1965 Ford Mustang Coupe - 289, c4, 53K miles

11-11-2013, 08:44 PM	#9
Vova Registered User Join Date: Aug 2012 Location: Los gatos ca Posts: 1,299	Re: Patch panels I'll also be selling both rear wheel wells that are in good condition.

11-11-2013, 11:32 PM	#11
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,155	Re: Patch panels figure both wheel wells in with shipping on my other stuff too please __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

11-12-2013, 11:06 AM	#12
xman Registered User Join Date: Mar 2009 Location: Channahon, IL Posts: 198	Re: Patch panels looking for the areas highlited how much shipped. mine is rusted due to bad windshield gasket. it is the lip that the gasket wraps around when installed Attached Images

11-12-2013, 09:27 PM	#14
SCOOBYDOOBYDOO Registered User Join Date: Feb 2010 Location: DANA POINT CA Posts: 256	Re: Patch panels how much for the whole truck i will come pick it up i live in so cal 949-661-1819 johnny __________________ ScoobyDoobyDoo

11-13-2013, 11:00 AM	#17
xman Registered User Join Date: Mar 2009 Location: Channahon, IL Posts: 198	Re: Patch panels here are pics of the areas from my burb I am looking for to give you a better idea Hopefully this will help Attached Images

11-13-2013, 09:28 PM	#19
SCOOBYDOOBYDOO Registered User Join Date: Feb 2010 Location: DANA POINT CA Posts: 256	Re: Patch panels Can I have pics from the inside roof frt area and outer frt drip rail __________________ ScoobyDoobyDoo

11-14-2013, 12:44 AM	#21
Vova Registered User Join Date: Aug 2012 Location: Los gatos ca Posts: 1,299	Re: Patch panels more pics. The rocks have more rust than i though. Attached Images

11-14-2013, 12:54 AM	#22
Vova Registered User Join Date: Aug 2012 Location: Los gatos ca Posts: 1,299	Re: Patch panels ... Attached Images



Register or Log In To remove these advertisements.

11-14-2013, 10:59 AM	#23
xman Registered User Join Date: Mar 2009 Location: Channahon, IL Posts: 198	Re: Patch panels I will have to pass on the patch I was looking for. Looks like yours is almost to the same point as mine is Thanks for checking

11-14-2013, 12:16 PM	#24
Bigdav160 Registered User Join Date: Apr 2011 Location: Klein Texas Posts: 3,852	Re: Patch panels I'm a glutton for punishment. How much for this section of dash? I realize the radio has been cut out. Attached Images __________________ My Classics: '72 K20 Suburban + '65 Dodge Town Wagon '72 Corvette Roadster +'67 Corvette Roadster '73 Z-28 Camaro '63 Ford SWB Uni Pickup '50 Ford Coupe

Register or Log In To remove these advertisements.