Changing Seats Thoughts

[LuckyJoe]

Guys, I ran across these out of a 2004 Yukon and would like comments or your thoughts. Currently installed is a seat from a 90's chevy truck, don't know what year but the way it is configured the driver side is a bit off center from the steering wheel and to me is unconfortable on long trips. So, I've decided to make a change in color and style. I'm going to go take a close look at these tomorrow, take some measurements and such. They look to be the second row and may be a fixed position (no gliders). Also, I think they are shown in the flipped position....Drive/Pass reversed. Am I right on this? If so, has anyone used these or something like them in a fixed position? I'm only 6' tall so it may ok. Comments? Thanks,

Joe

[klutz51]

they are flipped, the arm rest goes in the center. you could use a universal seat track. I am using 2001 Cadillac deville seats because full power with no seat module and the seat belts are in the seats. they fit in my 51 with a center console out of the same car.

[Donaldo]

I am putting in the powered 60/40 seats out of a '96 GMC pick up in the '51, they just fit width wise, the mounting is a bit ad-lib because of the center tranny floor hump of the donor truck -