Anybody using the LMC power windows? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1970/327/c10 · 12-25-2013, 05:05 PM

I wanting to get some power windows for my pickup and was wandering how good the power windows from LMC are?

eldogg · 12-26-2013, 09:23 AM

Check out Nu-Relics. http://nu-relics.com/index.html

**Razorbacker** · 12-26-2013, 10:01 AM

I have the LMC kit installed on my K10. They were already installed by the PO and I thought it was pretty cool my truck had power windows.

Well shortly after I purchased the truck the passenger side motor failed. That's when I found out LMC does not have any spare parts support for the product they sale.

I would not recommend LMC's kit, cheaply made, the electric motors are weak and LMC Customer Service will be absolutely no help if you have a problem down the road.

**1970 CST Short Wide** · 12-26-2013, 01:08 PM

http://www.a1electric.com/catalog/cat_chevtruck.htm
These are the ones I installed. Very easy to do and work perfect.
I highly recommend them

cheyenne shortstep · 12-26-2013, 05:30 PM

I also recommend A1 electric windows, after 15 years on my daily driven '72 the only problem I have had was one of the switches went bad. LMC sells JUNK and nothing but JUNK.

Wrenchbender Ret · 12-26-2013, 06:06 PM

I put the LMC kit in a 63 I used to have. It worked good. It was a lot of work installing it. It uses the original regulators so the mech. needs to be working freely or it will put excess load on the motor. I agree with the other guys, the A1 is a better setup if you want to spend a little more money. I used the A1 in my 70.

1970/327/c10 · 12-26-2013, 10:05 PM

Thanks for the info. I was watching videos on youtube and i didn't like how they installed. I will probably go with the nu-relics when i get around it.

bonnieclyde100 · 12-26-2013, 10:16 PM

here is another option if you have any fabrication skills and need to save a little money

http://67-72chevytrucks.com/vboard/s...d.php?t=604386

1970/327/c10 · 12-26-2013, 10:34 PM

You are a life saver. I did not want to spend 300 on those. I found me a project to do now. Thank you

bonnieclyde100 · 12-26-2013, 10:52 PM

your welcome let me know how it goes , pics would be good to

1970/327/c10 · 12-26-2013, 11:16 PM

will do, wouldn't happen to know of a good wiring kit or diy kit that i could make that looked good.

bonnieclyde100 · 12-26-2013, 11:40 PM

found one on ebay and im sure you can find alot more if you look a while

http://www.ebay.com/itm/12v-Universa...-/141079053628

bonnieclyde100 · 12-26-2013, 11:44 PM

here is another site that has alot to choose from

http://www.a1electric.com/switches.htm

1970/327/c10 · 12-27-2013, 01:26 AM

thanks, now I just have to get in gear and get it made

12-25-2013, 05:05 PM	#1
1970/327/c10 Registered User Join Date: Jan 2012 Location: Walker, MO Posts: 101	Anybody using the LMC power windows? I wanting to get some power windows for my pickup and was wandering how good the power windows from LMC are? __________________ Drivin People Insane With my Classic Chevy!

12-26-2013, 09:23 AM	#2
eldogg Registered User Join Date: May 2007 Location: Mooresville NC/Gainesville GA Posts: 499	Re: Anybody using the LMC power windows? Check out Nu-Relics. http://nu-relics.com/index.html __________________ Eric Evans Queen City Shop Truck http://67-72chevytrucks.com/vboard/s...34#post6139834 66 GMC http://67-72chevytrucks.com/vboard/s...d.php?t=543110

12-26-2013, 10:01 AM	#3
Razorbacker Senior Member Join Date: Aug 2011 Location: Benton, AR. Posts: 239	Re: Anybody using the LMC power windows? I have the LMC kit installed on my K10. They were already installed by the PO and I thought it was pretty cool my truck had power windows. Well shortly after I purchased the truck the passenger side motor failed. That's when I found out LMC does not have any spare parts support for the product they sale. I would not recommend LMC's kit, cheaply made, the electric motors are weak and LMC Customer Service will be absolutely no help if you have a problem down the road. __________________ Tony 1972 Chevy K10 SWB Custom Deluxe 350\|350\|NP205 2018 GMC Sierra Z/71 Crew 2008 GMC Yukon 2007 Chevy 1500 LT 1967 Pontiac Firebird 400

12-26-2013, 01:08 PM	#4
1970 CST Short Wide Senior Moment Join Date: Mar 2002 Location: Pittsburg Ca Posts: 4,215	Re: Anybody using the LMC power windows? http://www.a1electric.com/catalog/cat_chevtruck.htm These are the ones I installed. Very easy to do and work perfect. I highly recommend them __________________ 1970 CST LS 1 6 speed Ford 9 inch Detroit Tru Track, Dakota Didgital, Vintage Air, QA1 Coil Overs Front & Rear Lots of FUN 2013 GMC PU, Oldest Son 71 GMC LWB. QA1 Suspension, Angry SB. Youngest Son 2017 Toyota SUV Daughters car 2018 Traverse , Wife’s Ride Pittsburg Ca 94565

12-26-2013, 05:30 PM	#5
cheyenne shortstep Registered User Join Date: Jul 2010 Location: Vista Ca. Posts: 2,405	Re: Anybody using the LMC power windows? I also recommend A1 electric windows, after 15 years on my daily driven '72 the only problem I have had was one of the switches went bad. LMC sells JUNK and nothing but JUNK.

12-26-2013, 06:06 PM	#6
Wrenchbender Ret Registered User Join Date: Oct 2005 Location: Overland Park, Ks. Posts: 5,229	Re: Anybody using the LMC power windows? I put the LMC kit in a 63 I used to have. It worked good. It was a lot of work installing it. It uses the original regulators so the mech. needs to be working freely or it will put excess load on the motor. I agree with the other guys, the A1 is a better setup if you want to spend a little more money. I used the A1 in my 70.

12-26-2013, 10:05 PM	#7
1970/327/c10 Registered User Join Date: Jan 2012 Location: Walker, MO Posts: 101	Re: Anybody using the LMC power windows? Thanks for the info. I was watching videos on youtube and i didn't like how they installed. I will probably go with the nu-relics when i get around it. __________________ Drivin People Insane With my Classic Chevy!

12-26-2013, 10:16 PM	#8
bonnieclyde100 Registered User Join Date: Jan 2012 Location: Henderson,TX Posts: 336	Re: Anybody using the LMC power windows? here is another option if you have any fabrication skills and need to save a little money http://67-72chevytrucks.com/vboard/s...d.php?t=604386

12-26-2013, 10:34 PM	#9
1970/327/c10 Registered User Join Date: Jan 2012 Location: Walker, MO Posts: 101	Re: Anybody using the LMC power windows? You are a life saver. I did not want to spend 300 on those. I found me a project to do now. Thank you __________________ Drivin People Insane With my Classic Chevy!

12-26-2013, 10:52 PM	#10
bonnieclyde100 Registered User Join Date: Jan 2012 Location: Henderson,TX Posts: 336	Re: Anybody using the LMC power windows? your welcome let me know how it goes , pics would be good to

12-26-2013, 11:16 PM	#11
1970/327/c10 Registered User Join Date: Jan 2012 Location: Walker, MO Posts: 101	Re: Anybody using the LMC power windows? will do, wouldn't happen to know of a good wiring kit or diy kit that i could make that looked good. __________________ Drivin People Insane With my Classic Chevy!

12-26-2013, 11:40 PM	#12
bonnieclyde100 Registered User Join Date: Jan 2012 Location: Henderson,TX Posts: 336	Re: Anybody using the LMC power windows? found one on ebay and im sure you can find alot more if you look a while http://www.ebay.com/itm/12v-Universa...-/141079053628

12-26-2013, 11:44 PM	#13
bonnieclyde100 Registered User Join Date: Jan 2012 Location: Henderson,TX Posts: 336	Re: Anybody using the LMC power windows? here is another site that has alot to choose from http://www.a1electric.com/switches.htm

12-27-2013, 01:26 AM	#14
1970/327/c10 Registered User Join Date: Jan 2012 Location: Walker, MO Posts: 101	Re: Anybody using the LMC power windows? thanks, now I just have to get in gear and get it made __________________ Drivin People Insane With my Classic Chevy!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.