Detailed Lowering Info Video - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Desert.Chevy · 01-22-2014, 12:58 AM

I have been looking in this area for ways to lower my 1965 Chevrolet Long Fleet C10.

Info like Lowering Springs, Spindles, and Pancake crossmember for the Front, Lowering Springs, Lowering Blocks, and Frame C-Notches for the Rear.

I would love to see pictures of your way of lowering 64-66 C10 with stock wheels and close to stock size tires.

Let me know what you think of the video, or If you see/hear anything wrong.

http://www.youtube.com/watch?v=EDLtzfCUxtQ

Desert.Chevy · 01-25-2014, 09:22 AM

Morning bump

63 & 64 Bowties · 01-25-2014, 04:29 PM

I think maybe one reason you're not getting a reply is because this is all covered in these two threads which are always at the top (stickys) of this area:

Static Drops (w/about 500 posts)
http://67-72chevytrucks.com/vboard/s...d.php?t=507575
Bagged (w/about 500 posts)
http://67-72chevytrucks.com/vboard/s...d.php?t=507577

txinliner · 02-02-2014, 03:07 PM

I put 73 spindles on my 65 from belltech they bolt right on but there are a few other things you have to do, you can go the cheap easy way with springs and blocks as well.Just depends on budget and how low you wanna go

01-25-2014, 09:22 AM	#2
Desert.Chevy Registered User Join Date: Nov 2012 Location: Earth Posts: 339	Re: Detailed Lowering Info Video Morning bump

01-25-2014, 04:29 PM	#3
63 & 64 Bowties and a few others Join Date: Jun 2007 Location: Blue Ridge Mountains of VA Posts: 5,638	Re: Detailed Lowering Info Video I think maybe one reason you're not getting a reply is because this is all covered in these two threads which are always at the top (stickys) of this area: Static Drops (w/about 500 posts) http://67-72chevytrucks.com/vboard/s...d.php?t=507575 Bagged (w/about 500 posts) http://67-72chevytrucks.com/vboard/s...d.php?t=507577 __________________ Bill US Army Vet -193rd Infantry BlueRidgeMuscleCars.com “The greatness of a nation and its moral progress can be judged by the way its animals are treated” Gandhi

02-02-2014, 03:07 PM	#4
txinliner Registered User Join Date: May 2008 Location: tyler texas Posts: 94	Re: Detailed Lowering Info Video I put 73 spindles on my 65 from belltech they bolt right on but there are a few other things you have to do, you can go the cheap easy way with springs and blocks as well.Just depends on budget and how low you wanna go __________________ 65c10 43,000 original miles ,230 stovebolt,powerglide,3" drop spidles 3" drop springs w/ half coil cut and 5 drop springs in back with 1 1/2 blocks... c notch soon to add hei offy 4 v intake and holley 390



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.