|
|
|
01-27-2014, 01:11 AM
|
#1 |
|
Registered User
Join Date: Jan 2014
Location: toledo oregon
Posts: 17
|
starter wires
im putting together a 77 that was completely taken apart and then left for 15 years. i have two wires from the harness . one has big connector hole so it mmust go to main post but other small red wire must go to one side of the solenoid but dont know which.a friend said there should be a purple wire also but dont have one. any help on this subject?
|
|
|
|
01-27-2014, 01:36 AM
|
#2 |
|
Moderator
 
Join Date: Oct 2008
Location: Wentworth, NH
Posts: 4,977
|
Re: starter wires
Three wires on 1977;
2ga Main battery lead with 3/8" ring terminal. Original is Black... 14ga Main Power fusible link with 3/8" ring terminal. Red?? 12ga Start wire with #8 ring terminal. Original is Purple... If you grab the 1977 wiring diagrams from the link in my sig you should be able to find what pin to buzz it back to on the bulkhead plug to verify. Interesting note... The wiring diagram calls out SXL and HXL on the engine compartment side so it's probably actual crosslink polyethylene jacketed wire in the engine compartment. Hmmm. Never noticed that on the diagrams before. I thought most wire had PVC insulation this far back.
__________________
1959 M35A2 LDT465-1D SOLD 1967 Dodge W200 B383, NP420/NP201 SOLD 1969 Dodge Polara 500 B383, A833 SOLD 1972 Ford F250 FE390, NP435/NP205 SOLD 1976 Chevy K20, 6.5L, NV4500/NP208 SOLD 1986 M1008 CUCV SOLD 2000 GMC C2500, TD6.5L, NV4500 2005 Chevy Silverado LS 2500HD 6.0L 4L80E/NP263 2009 Impala SS LS4 V8 RTFM... GM Parts Books, GM Schematics, GM service manuals, and GM training materials...
And please let us know if and how your repairs were successful. |
|
|
|
|
01-30-2014, 01:41 AM
|
#3 |
|
Registered User
Join Date: Jan 2014
Location: toledo oregon
Posts: 17
|
Re: starter wires
thanks for the help. wiring is not my favorite task especially what someone else left behind but shoul have it now.
|
|
|
|
 |
| Bookmarks |
|
|
Hybrid Mode
