|
|
|
01-29-2014, 09:33 PM
|
#1 |
|
Registered User
Join Date: Dec 2010
Location: NC
Posts: 666
|
8k Reproduction Tach
Has anyone tried using one of the 8k reproduction (factory looking) tach with an LS swap. I think I remember seeing somewhere that only the originals worked, but 5k won't do me much good since my WOT shift is set to 6500 rpm. I can't find the post now. Does anybody have any experience?
|
|
|
|
01-29-2014, 10:30 PM
|
#2 |
|
Truck and auto performance nut
Join Date: Feb 2007
Location: McKinney,Texas
Posts: 3,848
|
Re: 8k Reproduction Tach
are you talking about a tach to fit the center 3.x" hole?
If so, I think some have used the 2nd gen Camaro 7k?rpm tach?
__________________
Kurt - '68 GMC short step - NIB '09 LY6 6.0L crate motor w/mods, NIB '12 crate 4L85e w/billet 3k stall Circle D, 3.73 posi 12 bolt, DynaTech f-swap headers, 3/4 drop, handling mods, etc. - my toy '72 Chevy LWB C-10 Highlander - 350/350 ps/pb/tilt/ac - not original but close '06 Chevy TrailBlazerSS - LS2/4L70e - little black hot rod SUV - my DD '18 Kia Sorento - wife's econo-driver '95 Chevy S10 - reg cab shortbed, LS, 4.3, auto... my '68's powertrain and chassis build -links broken A surprise phase - carb to efi -links broken |
|
|
|
|
01-29-2014, 11:02 PM
|
#3 |
|
Registered User
Join Date: Dec 2009
Location: Independence Mo
Posts: 4,119
|
Re: 8k Reproduction Tach
I've used reproduction 5k tachs in the past and they worked with no problems, so I don't see why an 8k one wouldn't work.
__________________
My '72 short bed build. http://www.ls1tech.com/forums/conver...6-0-4l80e.html 5.3 swap into my RUSTY '71 C10 http://ls1tech.com/forums/conversion...71-c-10-a.html |
|
|
|
|
01-30-2014, 03:23 PM
|
#4 |
|
Slots go on anything!
Join Date: May 2003
Location: Richardson, TX
Posts: 5,957
|
Re: 8k Reproduction Tach
I have the GM Sport Salvage one in my '91 Cluster. Not sure if it works yet, since the truck isn't running yet. I did have the PCM programmed for a standard tach though.
__________________
1974 Jimmy- 5.3/4L80e/NP241 |
|
|
|
|
02-04-2014, 09:41 PM
|
#5 |
|
Registered User
Join Date: Dec 2010
Location: NC
Posts: 666
|
Re: 8k Reproduction Tach
Sorry for the delayed response. For some reason, my email thinks that forum messages are all of the sudden spam. Yes I'm referring to the reproduction (OE look) 8k rpm tachs available for the center hole in the cluster. Good to know that the repro 5k tachs worked. I would have sworn I read that only the originals did. I guess I may be giving it a go then.
|
|
|
|
 |
| Bookmarks |
|
|
Hybrid Mode
