WTB Oil pressure sender adapter - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Hart_Rod** · 02-13-2014, 11:36 AM

I need an oil pressure adapter that bolts just above the oil filter. It's the type that needs to be drilled and threaded for an oil pressure sender.

SeTx67 · 02-13-2014, 08:57 PM

http://www.improvedracing.com/oiling...d7cc2e7286eedb

SeTx67 · 02-13-2014, 09:05 PM

Here's some other info with part numbers that may give you some other options/ideas

http://www.ls2.com/forums/showthread...r-on-LS-Series

**Hart_Rod** · 02-14-2014, 06:51 PM

Thanks for the info. I was just hoping someone had an extra one laying around. I do somewhere, but I just can't find it!

ls1nova71 · 02-24-2014, 11:31 AM

You still need one of these? I'm sure I have some lying around.

**Hart_Rod** · 02-24-2014, 11:54 AM

Quote:

Originally Posted by ls1nova71

You still need one of these? I'm sure I have some lying around.

Whatya got?!

ls1nova71 · 02-24-2014, 08:44 PM

Quote:

Originally Posted by Hart_Rod

Whatya got?!

I got one of them there $28 block off plates. Id take $26.50 for it.

Seriously though, I'd do $5 shipped on it.

**Hart_Rod** · 02-25-2014, 11:28 AM

Quote:

Originally Posted by ls1nova71

I got one of them there $28 block off plates. Id take $26.50 for it.

Seriously though, I'd do $5 shipped on it.

Thanks! Send me your paypal!

**Hart_Rod** · 03-03-2014, 12:01 PM

Quote:

Originally Posted by ls1nova71

I got one of them there $28 block off plates. Id take $26.50 for it.

Seriously though, I'd do $5 shipped on it.

Got it! thanks!

Rob

**truckdude239** · 03-03-2014, 01:19 PM

i bought one from my local dealer came off a gto was already threaded and used the autometter 2277 adpator to mount my sensor

Motoxrrar · 03-12-2014, 01:14 AM

They are pretty easy to thread just drill a hole and a cheap tap will do the job.
I took mine off the original sender and tapped in with a t that is sold on ebay, mainly because I have an oil cooler on mine.

**First c10** · 03-12-2014, 09:38 PM

Can I ask why you can't put the sender were the original sender was for the lsx?

Motoxrrar · 03-12-2014, 10:09 PM

Quote:

Originally Posted by First c10

Can I ask why you can't put the sender were the original sender was for the lsx?

It depends on the motor you have I suppose. I have a 4.8 LY2 and the original oil pressure sender is needed to run the motor for E38 pcm's. But I just tapped a whole underneath it like a "T" and hooked my line to my gauge. That way I can run my original gauges in my truck.

Also my coolant temp gauge I used a sender from a 86 Monte Carlo ss and cut the threads down with my lathe to fit in the passenger side of the head. Didn't want to be cutting too many wholes into the heads or using those big donkey adapters that stick out of the block.

Tach is easy to run off the pcm or msd makes a tach signal adapter that clips onto the coil wire too..

I do have a block off plate too except it's not tapped yet.

**First c10** · 03-12-2014, 11:28 PM

Ok cool. I m trying to get the oil pressure through my vhx gauges via the can bus
Thanks

Motoxrrar · 03-12-2014, 11:41 PM

Quote:

Originally Posted by First c10

Ok cool. I m trying to get the oil pressure through my vhx gauges via the can bus
Thanks

That should be fairly simple.
Dakota digital gives you pretty much all the adapters you might need including the sensors you need. Only one thing I could imagine you might have is where to put the sensors.

Did you find a location to put your water, oil, and vss already?

**First c10** · 03-13-2014, 01:38 AM

I have all the parameters from the obd2/canbus except the oil. DD said that it won't read it. But I read somewhere that it was possible.

Motoxrrar · 03-13-2014, 01:48 AM

Quote:

Originally Posted by First c10

I have all the parameters from the obd2/canbus except the oil. DD said that it won't read it. But I read somewhere that it was possible.

What motor do you have ? And what pcm are you using?

**First c10** · 03-13-2014, 01:51 AM

2011 lc9/6L80 e38 ECM

Motoxrrar · 03-13-2014, 02:00 AM

I could have swore there is a signal from the pcm on the e38.
I'll do some checking Monday with a friend of mine and find out for you.
Do you know what the signal parameters are required by DD?

**Hart_Rod** · 03-13-2014, 08:12 AM

Quote:

Originally Posted by First c10

I am not sure. As I don't have anyway to know except what the dd reads when I plugged it in. But thank you for the information it would be nice to get all the info to the Vhx gauges. I can get the mechanics and the electric parts working this communications part I am not sure about.
Thanks

Quote:

Originally Posted by First c10

I have all the parameters from the obd2/canbus except the oil. DD said that it won't read it. But I read somewhere that it was possible.

Quote:

Originally Posted by Motoxrrar

I could have swore there is a signal from the pcm on the e38.
I'll do some checking Monday with a friend of mine and find out for you.
Do you know what the signal parameters are required by DD?

The E38 computer does push an oil signal of the CANBUS, however, Dakota Digital's BIM-01-1 will not display it on the gauges. I'm not sure why and I've spent about 3 months and written numerous emails back and forth with DD and received no good reason why their BIM won't display it. I get IAT, gear indication, H20 temp, speed, tach, trans temp and OAT (if you have the sensor) but no oil pressure....

. I let them know that most of the other gauges out there that use the CanBus CAN display oil pressure, so hopefully my continual bugging about this will prompt them to updgrade their BIM interface.

**First c10** · 03-13-2014, 02:08 AM

I am not sure. As I don't have anyway to know except what the dd reads when I plugged it in. But thank you for the information it would be nice to get all the info to the Vhx gauges. I can get the mechanics and the electric parts working this communications part I am not sure about.
Thanks

Motoxrrar · 03-13-2014, 02:13 AM

No problem probably Monday I'll see my friends at ProDyno of Phoenix. One of the owners has a 70 chevy with a DD dash and turbo 5.3l I'm sure he will have the answer for sure. I will get back to you then.

**First c10** · 03-13-2014, 02:15 AM

Thanks for the help.

**First c10** · 03-13-2014, 01:53 PM

I hope we can figure it out. So until than I guess I need to put the sender that came with the gauges. In combination with the stock one.

Motoxrrar · 03-13-2014, 01:58 PM

I think that's a 1/8 NPT that came with it right? Where will you put it?

02-13-2014, 11:36 AM	#1
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,858	WTB Oil pressure sender adapter I need an oil pressure adapter that bolts just above the oil filter. It's the type that needs to be drilled and threaded for an oil pressure sender. Attached Images __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

02-13-2014, 08:57 PM	#2
SeTx67 Registered User Join Date: May 2013 Location: Lumberton, TX Posts: 795	Re: WTB Oil pressure sender adapter http://www.improvedracing.com/oiling...d7cc2e7286eedb

02-13-2014, 09:05 PM	#3
SeTx67 Registered User Join Date: May 2013 Location: Lumberton, TX Posts: 795	Re: WTB Oil pressure sender adapter Here's some other info with part numbers that may give you some other options/ideas http://www.ls2.com/forums/showthread...r-on-LS-Series

02-14-2014, 06:51 PM	#4
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,858	Re: WTB Oil pressure sender adapter Thanks for the info. I was just hoping someone had an extra one laying around. I do somewhere, but I just can't find it! __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

02-24-2014, 11:31 AM	#5
ls1nova71 Registered User Join Date: Dec 2009 Location: Independence Mo Posts: 4,119	Re: WTB Oil pressure sender adapter You still need one of these? I'm sure I have some lying around. __________________ My '72 short bed build. http://www.ls1tech.com/forums/conver...6-0-4l80e.html 5.3 swap into my RUSTY '71 C10 http://ls1tech.com/forums/conversion...71-c-10-a.html

03-03-2014, 01:19 PM	#10
truckdude239 Senior Member Join Date: Sep 2005 Location: Lewisville, Nc Posts: 10,237	Re: WTB Oil pressure sender adapter i bought one from my local dealer came off a gto was already threaded and used the autometter 2277 adpator to mount my sensor __________________ David fuller Ase Certified Mechanic Click here to help support our board!! 1971 Chevy c-10 under going a 4.8l LSx swap Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=421305 2007 Honda Accord my daily 145kmiles 2002 Honda Accord 4 door With 330k(sisters car) 2005 toyota Avalon 228k( brothers car) 2002 Sububran 5.3 245k 2000 Tahoe 5.3l 378 General manager for Marco's Carwash & lube

03-12-2014, 01:14 AM	#11
Motoxrrar Registered User Join Date: Feb 2014 Location: Tennessee Posts: 282	Re: WTB Oil pressure sender adapter They are pretty easy to thread just drill a hole and a cheap tap will do the job. I took mine off the original sender and tapped in with a t that is sold on ebay, mainly because I have an oil cooler on mine.

03-12-2014, 09:38 PM	#12
First c10 Registered User Join Date: Dec 2012 Location: Los Banos CA Posts: 2,705	Re: WTB Oil pressure sender adapter Can I ask why you can't put the sender were the original sender was for the lsx? __________________ 1956 Chevy Bel Air 2 door 1956 Chevy 210 4 Door 1970 K20 LWB project the Hulk build w/Supercharged 4.8L-ly2/4L60E HULK BUILD 1970 C10 Yellow/White Deluxe LWB w/ 5.3L-LC9/6L80E 1968 K10 LWB Dark green my son calls it "THE HULK Jr"HULK JR SOLD GO GO!!!

03-12-2014, 11:28 PM	#14
First c10 Registered User Join Date: Dec 2012 Location: Los Banos CA Posts: 2,705	Re: WTB Oil pressure sender adapter Ok cool. I m trying to get the oil pressure through my vhx gauges via the can bus Thanks __________________ 1956 Chevy Bel Air 2 door 1956 Chevy 210 4 Door 1970 K20 LWB project the Hulk build w/Supercharged 4.8L-ly2/4L60E HULK BUILD 1970 C10 Yellow/White Deluxe LWB w/ 5.3L-LC9/6L80E 1968 K10 LWB Dark green my son calls it "THE HULK Jr"HULK JR SOLD GO GO!!!

03-13-2014, 01:38 AM	#16
First c10 Registered User Join Date: Dec 2012 Location: Los Banos CA Posts: 2,705	Re: WTB Oil pressure sender adapter I have all the parameters from the obd2/canbus except the oil. DD said that it won't read it. But I read somewhere that it was possible. __________________ 1956 Chevy Bel Air 2 door 1956 Chevy 210 4 Door 1970 K20 LWB project the Hulk build w/Supercharged 4.8L-ly2/4L60E HULK BUILD 1970 C10 Yellow/White Deluxe LWB w/ 5.3L-LC9/6L80E 1968 K10 LWB Dark green my son calls it "THE HULK Jr"HULK JR SOLD GO GO!!!

03-13-2014, 01:51 AM	#18
First c10 Registered User Join Date: Dec 2012 Location: Los Banos CA Posts: 2,705	Re: WTB Oil pressure sender adapter 2011 lc9/6L80 e38 ECM __________________ 1956 Chevy Bel Air 2 door 1956 Chevy 210 4 Door 1970 K20 LWB project the Hulk build w/Supercharged 4.8L-ly2/4L60E HULK BUILD 1970 C10 Yellow/White Deluxe LWB w/ 5.3L-LC9/6L80E 1968 K10 LWB Dark green my son calls it "THE HULK Jr"HULK JR SOLD GO GO!!!

03-13-2014, 02:00 AM	#19
Motoxrrar Registered User Join Date: Feb 2014 Location: Tennessee Posts: 282	Re: WTB Oil pressure sender adapter I could have swore there is a signal from the pcm on the e38. I'll do some checking Monday with a friend of mine and find out for you. Do you know what the signal parameters are required by DD?

03-13-2014, 02:08 AM	#21
First c10 Registered User Join Date: Dec 2012 Location: Los Banos CA Posts: 2,705	Re: WTB Oil pressure sender adapter I am not sure. As I don't have anyway to know except what the dd reads when I plugged it in. But thank you for the information it would be nice to get all the info to the Vhx gauges. I can get the mechanics and the electric parts working this communications part I am not sure about. Thanks __________________ 1956 Chevy Bel Air 2 door 1956 Chevy 210 4 Door 1970 K20 LWB project the Hulk build w/Supercharged 4.8L-ly2/4L60E HULK BUILD 1970 C10 Yellow/White Deluxe LWB w/ 5.3L-LC9/6L80E 1968 K10 LWB Dark green my son calls it "THE HULK Jr"HULK JR SOLD GO GO!!!

03-13-2014, 02:13 AM	#22
Motoxrrar Registered User Join Date: Feb 2014 Location: Tennessee Posts: 282	Re: WTB Oil pressure sender adapter No problem probably Monday I'll see my friends at ProDyno of Phoenix. One of the owners has a 70 chevy with a DD dash and turbo 5.3l I'm sure he will have the answer for sure. I will get back to you then.

03-13-2014, 02:15 AM	#23
First c10 Registered User Join Date: Dec 2012 Location: Los Banos CA Posts: 2,705	Re: WTB Oil pressure sender adapter Thanks for the help. __________________ 1956 Chevy Bel Air 2 door 1956 Chevy 210 4 Door 1970 K20 LWB project the Hulk build w/Supercharged 4.8L-ly2/4L60E HULK BUILD 1970 C10 Yellow/White Deluxe LWB w/ 5.3L-LC9/6L80E 1968 K10 LWB Dark green my son calls it "THE HULK Jr"HULK JR SOLD GO GO!!!



Register or Log In To remove these advertisements.

03-13-2014, 01:53 PM	#24
First c10 Registered User Join Date: Dec 2012 Location: Los Banos CA Posts: 2,705	Re: WTB Oil pressure sender adapter I hope we can figure it out. So until than I guess I need to put the sender that came with the gauges. In combination with the stock one. __________________ 1956 Chevy Bel Air 2 door 1956 Chevy 210 4 Door 1970 K20 LWB project the Hulk build w/Supercharged 4.8L-ly2/4L60E HULK BUILD 1970 C10 Yellow/White Deluxe LWB w/ 5.3L-LC9/6L80E 1968 K10 LWB Dark green my son calls it "THE HULK Jr"HULK JR SOLD GO GO!!!

03-13-2014, 01:58 PM	#25
Motoxrrar Registered User Join Date: Feb 2014 Location: Tennessee Posts: 282	Re: WTB Oil pressure sender adapter I think that's a 1/8 NPT that came with it right? Where will you put it?

Register or Log In To remove these advertisements.