The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1960 - 1966 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 03-02-2014, 08:01 PM   #1
Larry64
Registered User
 
Join Date: Sep 2011
Location: Lewisburg, TN
Posts: 315
Cab mounts

1964 short stepper. How does one go about jacking up the side of the cab to change the mounts?
Thanks Larry
Larry64 is offline   Reply With Quote
Old 03-02-2014, 08:31 PM   #2
PGSigns
Senior Member
 
PGSigns's Avatar
 
Join Date: Jan 2011
Location: Hayes Va
Posts: 4,569
Re: Cab mounts

Is the truck complete or just the cab?
Jimmy
__________________
60 to 66 Chevy and GMC window decals
http://67-72chevytrucks.com/vboard/s...d.php?t=661131
Good friends, good food and a hotrod what else do you need?
1966 BBW long fleet Daily driver
1965 BBW short fleet Sold and going to a good home
1965 Suburban
2003 3500 Duramax
2005 Ultra Classic
PGSigns is offline   Reply With Quote
Old 03-02-2014, 08:55 PM   #3
Larry64
Registered User
 
Join Date: Sep 2011
Location: Lewisburg, TN
Posts: 315
Re: Cab mounts

The truck is complete.
Larry
Larry64 is offline   Reply With Quote
Old 03-02-2014, 09:42 PM   #4
dougf
Registered User
 
dougf's Avatar
 
Join Date: Aug 2012
Location: Fort Campbell, KY
Posts: 494
Re: Cab mounts

Hi, I just did this on one side. What I did was I took off the cab bolts on the right and rear of the side you are replacing (They are usually really corroded and need replacement). I then jacked up the cab just an inch to relieve the pressure and used a jack stand to support the cab. No need to jack up any further. Good luck!
dougf is offline   Reply With Quote
Old 03-03-2014, 02:46 PM   #5
Larry64
Registered User
 
Join Date: Sep 2011
Location: Lewisburg, TN
Posts: 315
Re: Cab mounts

Thanks Doug.
Larry
Larry64 is offline   Reply With Quote
Old 03-03-2014, 04:49 PM   #6
Old Bleu
Registered User
 
Old Bleu's Avatar
 
Join Date: Jul 2013
Location: Loganville, GA
Posts: 115
Re: Cab mounts

I just replaced the cab mounts on my '64 a few weeks ago. I just loosed the front and rear mounts a bit on one side, then used a floor jack to raise the front enough to slip the old mount out and the new one in. Then started the nut, but left it loose. Then raised the rear enought to slip the mount in and out. Lowered the rear and then tightened up both front and rear on that side. Then repeated it for the other side. I was pleasantly surprised at how easy it was!
Old Bleu is offline   Reply With Quote
Old 03-03-2014, 09:00 PM   #7
Larry64
Registered User
 
Join Date: Sep 2011
Location: Lewisburg, TN
Posts: 315
Re: Cab mounts

Good advice old Bleu.
Larry
Larry64 is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 10:52 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com