ID SBC Parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

72supermike · 03-06-2014, 05:23 PM

I have a small collection of parts I no longer need. Here is the list and the prices. They are somewhat negotiable, especially the more items you want. Take a look at the attached pics. I might be missing a few pics. Prices are before shipping. Thanks!

Edelbrock TM-1 SBC single plane intake good used condition. $65

Edelbrock 7501 RPM Air Gap SBC dual plane intake. Good used condition. sold

No name SBC Air Gap dual plane intake. Works just as good as an Edelbrock sold

SBC 400ci crank that has been machined for use in a 350 to make a 383 stroker. Barely used. Engine had an issue and was disassembled. Didn't affect the crank. Also have the balanced damper for it. sold

SBC Chrome Valve covers. Good condition. $35

SBC black with red lettering. Good condition. sold

Heat tabs for cyl heads. Tells you if you've overheated your heads. Adhesive them to the head and the center melts if the head exceeds 580*F. Have a bunch of them and will sell 10 for $5 Part # t-580 Pioneer brand

Mr Gasket 1" carb spacer. $10

Carter AFB Competition Series Carb 625 cfm electric choke with Vacuum secondaries. Been sitting so you might need to kit it. Good carb. Came off a running engine. sold

York A/C compressor. With bracket for SBC $75

SBC 400ci flexplate. Very good ring gear. have 2 of them. $50 each

SBC 350ci flywheel. Good condition. Ring gear looks really good. standard practice would be to resurface it at a machine shop. Cost is minimal. $85

SBC starters. 1 mounts through nose, 1 mounts through the bottom/side. Both work fine. sold

SBC short water pump. New, never installed. Has small crack were the heater hose pipe screws in. Doesn't affect the pump. $25

Various SBC crank and water pump/fan pulleys. Good condition. All for sold

3 alternators. Internally and externally regulated. 1 has a sbc bracket. All for 3 $40

SBC clutch fan. sold

Fan spacers that mount the the water pump. 2 for $10

SBC engine mounts. Qty:5 All for $35

http://s820.photobucket.com/user/mik...s%20for%20sale

sstaten69 · 03-06-2014, 05:34 PM

have any pics of the carb?

Dirt_Baller · 03-06-2014, 05:45 PM

Edelbrock 7501 RPM Air Gap SBC dual plane intake. Good used condition.
SBC black with red lettering. Good condition.

$190 Shipped to 42223?

**jimer1964** · 03-06-2014, 05:55 PM

hi interested in both starters shipped to pa 19320 thanks

Dirt_Baller · 03-06-2014, 10:06 PM

Quote:

Originally Posted by Dirt_Baller

Edelbrock 7501 RPM Air Gap SBC dual plane intake. Good used condition.
SBC black with red lettering. Good condition.

$190 Shipped to 42223?

Payment Sent for Intake and black valve covers.

Can you post a pic of the intake?

72supermike · 03-07-2014, 01:40 AM

Lowood77 has spoken for the carb, 400 crank/damper, and pulleys. Awaiting payment.

Starters and clutch fan pending for Jimmer1964

Dirtballer, payment received. Here is a pic of the intake. It no longer has the the chrome thermostat housing on it and not as much orange paint. brake cleaner takes the paint right off.

72supermike · 03-06-2014, 09:31 PM

Quote:

Originally Posted by sstaten69

have any pics of the carb?

http://i820.photobucket.com/albums/z...e24e94.jpg?475

That is one pic. I can get more later. Heading out right now.

Dirt_baller, Yeah, I can do that. I'll pm you my paypal.

$190 Shipped to 42223?

Jimmer1964, how about $100 shipped for both?

michael bustamante, I had pics of the mtr mounts but somehow they got deleted. I'll get some more most likely tomorrow evening west coast time.

Lowood77 · 03-06-2014, 09:45 PM

Sir,
I'll take the carb, Black valve covers, all the pulleys, and the 400 crank and dampener. PM me for payment info.
Thank you in advance

**michael bustamante** · 03-06-2014, 08:19 PM

Pic of the motor mounts?

qksilver · 03-06-2014, 09:44 PM

Do you know if the pulleys are from a short water pump set up, they look like they are.

Make me a deal with shipping and I will buy them, if they are for short water pump.

thanks,
Steve

pm me if possible I tend to forget

aftamathe86 · 03-07-2014, 09:08 AM

Could I get some pic of York compressor and bracket thanks

72supermike · 03-08-2014, 03:46 PM

Pm's replied to. And I've updated the list with what has sold. Thanks!

qksilver · 03-09-2014, 11:14 PM

Thanks..........I guess I missed the PM

Steve

**kev2809** · 03-10-2014, 12:47 AM

Whats the condition of the internally regulated alt and do you have pics?

72supermike · 03-16-2014, 09:57 PM

up ttt~!

70Firetruck · 05-08-2014, 01:33 AM

If aftermathe isn't interested in the sbc York and mount, I am. Can you send me some pics and shipping to 94801.

03-06-2014, 05:23 PM	#1
72supermike Registered User Join Date: Nov 2009 Location: Harrison, Idaho Posts: 214	SBC Parts I have a small collection of parts I no longer need. Here is the list and the prices. They are somewhat negotiable, especially the more items you want. Take a look at the attached pics. I might be missing a few pics. Prices are before shipping. Thanks! Edelbrock TM-1 SBC single plane intake good used condition. $65 Edelbrock 7501 RPM Air Gap SBC dual plane intake. Good used condition. sold No name SBC Air Gap dual plane intake. Works just as good as an Edelbrock sold SBC 400ci crank that has been machined for use in a 350 to make a 383 stroker. Barely used. Engine had an issue and was disassembled. Didn't affect the crank. Also have the balanced damper for it. sold SBC Chrome Valve covers. Good condition. $35 SBC black with red lettering. Good condition. sold Heat tabs for cyl heads. Tells you if you've overheated your heads. Adhesive them to the head and the center melts if the head exceeds 580F. Have a bunch of them and will sell 10 for $5 Part # t-580 Pioneer brand Mr Gasket 1" carb spacer. $10 Carter AFB Competition Series Carb 625 cfm electric choke with Vacuum secondaries. Been sitting so you might need to kit it. Good carb. Came off a running engine. sold York A/C compressor. With bracket for SBC $75 SBC 400ci flexplate. Very good ring gear. have 2 of them. $50 each SBC 350ci flywheel. Good condition. Ring gear looks really good. standard practice would be to resurface it at a machine shop. Cost is minimal. $85 SBC starters. 1 mounts through nose, 1 mounts through the bottom/side. Both work fine. sold SBC short water pump. New, never installed. Has small crack were the heater hose pipe screws in. Doesn't affect the pump. $25 Various SBC crank and water pump/fan pulleys. Good condition. All for sold 3 alternators. Internally and externally regulated. 1 has a sbc bracket. All for 3 $40 SBC clutch fan. sold Fan spacers that mount the the water pump. 2 for $10 SBC engine mounts. Qty:5 All for $35 http://s820.photobucket.com/user/mik...s%20for%20sale Last edited by 72supermike; 03-16-2014 at 09:56 PM.*

03-06-2014, 05:34 PM	#2
sstaten69 Registered User Join Date: Feb 2011 Location: Irondale, Missouri. Posts: 196	Re: SBC Parts have any pics of the carb? __________________ http://67-72chevytrucks.com/vboard/s...0&referrerid=0

03-06-2014, 05:45 PM	#3
Dirt_Baller Registered User Join Date: Feb 2014 Location: Ft Campbell Posts: 82	Re: SBC Parts Edelbrock 7501 RPM Air Gap SBC dual plane intake. Good used condition. SBC black with red lettering. Good condition. $190 Shipped to 42223? Last edited by Dirt_Baller; 03-06-2014 at 05:59 PM.

03-06-2014, 05:55 PM	#4
jimer1964 Senior Member Join Date: Jan 2007 Location: bowmansville,pa Posts: 1,681	Re: SBC Parts hi interested in both starters shipped to pa 19320 thanks

03-07-2014, 01:40 AM	#6
72supermike Registered User Join Date: Nov 2009 Location: Harrison, Idaho Posts: 214	Re: SBC Parts Lowood77 has spoken for the carb, 400 crank/damper, and pulleys. Awaiting payment. Starters and clutch fan pending for Jimmer1964 Dirtballer, payment received. Here is a pic of the intake. It no longer has the the chrome thermostat housing on it and not as much orange paint. brake cleaner takes the paint right off.

03-06-2014, 09:45 PM	#8
Lowood77 Registered User Join Date: Nov 2011 Location: Spanish Fork, UT Posts: 139	Re: SBC Parts Sir, I'll take the carb, Black valve covers, all the pulleys, and the 400 crank and dampener. PM me for payment info. Thank you in advance

03-06-2014, 08:19 PM	#9
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,875	Re: SBC Parts Pic of the motor mounts? __________________ 1967custom

03-06-2014, 09:44 PM	#10
qksilver Senior Member Join Date: Dec 2004 Location: Southern Pines NC Posts: 3,853	Re: SBC Parts Do you know if the pulleys are from a short water pump set up, they look like they are. Make me a deal with shipping and I will buy them, if they are for short water pump. thanks, Steve pm me if possible I tend to forget

03-07-2014, 09:08 AM	#11
aftamathe86 Registered User Join Date: Feb 2010 Location: mcminnville,tn Posts: 153	Re: SBC Parts Could I get some pic of York compressor and bracket thanks __________________ 67 step---68 fleet---67 fleet

03-08-2014, 03:46 PM	#12
72supermike Registered User Join Date: Nov 2009 Location: Harrison, Idaho Posts: 214	Re: SBC Parts Pm's replied to. And I've updated the list with what has sold. Thanks!

03-09-2014, 11:14 PM	#13
qksilver Senior Member Join Date: Dec 2004 Location: Southern Pines NC Posts: 3,853	Re: SBC Parts Thanks..........I guess I missed the PM Steve

03-10-2014, 12:47 AM	#14
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,191	Re: SBC Parts Whats the condition of the internally regulated alt and do you have pics? __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

03-16-2014, 09:57 PM	#15
72supermike Registered User Join Date: Nov 2009 Location: Harrison, Idaho Posts: 214	Re: SBC Parts up ttt~!

05-08-2014, 01:33 AM	#16
70Firetruck Registered User Join Date: Nov 2013 Location: Novato, ca Posts: 20	Re: SBC Parts If aftermathe isn't interested in the sbc York and mount, I am. Can you send me some pics and shipping to 94801.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.